Merge pull request #125 from onkelbeh/2022.9.4

2022.9.4
update homeassistant-2022.9.4
2022-09-15 18:32:29 +02:00 · 2022-09-15 18:19:25 +02:00 · 2022-09-15 18:17:42 +02:00 · 2022-09-15 18:13:53 +02:00 · 2022-09-14 20:51:48 +02:00 · 2022-09-14 20:42:37 +02:00
47 changed files with 353 additions and 218 deletions
--- a/README.md
+++ b/README.md
@@ -523,11 +523,11 @@ A daily compile test is run at Github with Python 3.9 to catch general faults. E

 ## Licenses
 This repository itself is released under GPL-3 (like most Gentoo repositories), all work on the depending components under the licenses they came from. Perhaps you came here because I filed an issue at your component about a bad or missing license. It is easy to [assign a license](https://docs.github.com/en/communities/setting-up-your-project-for-healthy-contributions/adding-a-license-to-a-repository). During cleanups and license investigations I have been asked often which license to choose. I am not a lawyer, but I can offer the following table, counted over this repository, perhaps this helps your decision. If a package has more than one license listed, all of them are counted.
-There are 1888 Ebuilds in total, 1881 of them have in total 1893 (35 different) licenses assigned.
+There are 1891 Ebuilds in total, 1884 of them have in total 1896 (35 different) licenses assigned.

 |License| Ebuilds using it|
 |-------|-----|
-|MIT|1138|
+|MIT|1141|
 |Apache-2.0|359|
 |GPL-3|116|
 |BSD|104|
@@ -563,9 +563,9 @@ There are 1888 Ebuilds in total, 1881 of them have in total 1893 (35 different)
 |CC-BY-NC-SA-4.0|1|
 |CC0-1.0|1|

-(Last counted: 13/09/2022)
+(Last counted: 15/09/2022)

 I did my best to keep these clean. If a valid license was published on PyPI, it has been automatically merged. Otherwise I took it from GitHub or alternatively from comments/files in the source. Sometimes these differed and have been not unique. All license strings are adjusted to the list in `/usr/portage/gentoo/licenses/`. Some packages do not have any license published. In this case, Authors have been asked for clarification, some did not respond. Following the [official Gentoo Guide](https://devmanual.gentoo.org/general-concepts/licenses/index.html), these then were added with an `all-rights-reserved` license and `RESTRICT="mirror"` was set. Find the appropriate licenses referenced in the Ebuild files and in the corresponding homepages or sources.

 A big thanks goes to Iris for reviewing this README.
-Last updated: 13/09/2022
+Last updated: 15/09/2022
--- a/app-misc/homeassistant-full/Manifest
+++ b/app-misc/homeassistant-full/Manifest
@@ -11,12 +11,12 @@ AUX update-homeassistant 1326 BLAKE2B 917bdd332c4e5dea5177eecd11a7f8d72b911fddfd
 DIST homeassistant-2022.7.7.tar.gz 15751383 BLAKE2B 6e5d38086f08a86b025163c3e66a20ab935dc527529ba5352cf56aaeb23806c904a89db355a0d54648859828f722c2dc747282fb94aaf55889382bb885ad672e SHA512 aa181f39718d970de9ff88c79bf86cb60e95d11eda012553cc6bc1654eed7675d1a89a568a11bd53110be46cad89a647ce74d66e109fac87bfcda5363dbcbd21
 DIST homeassistant-2022.8.6.tar.gz 15994374 BLAKE2B d31afd291bca68ba8b3a090c5fc6b22a2b45679e199754371490e61a776fc07e406068a1c0b0b9d691d2dc421ab078668f40e5e01497d10f365c40e4091a7021 SHA512 cef95a06a229986ab46772b5be971cc8c5040ba81f16cfa4e9bce7d566d193467d969ee2db9d7b7d45056617d281d68f8d6324a1f7d88f2a3583f5c4a1951725
 DIST homeassistant-2022.8.7.tar.gz 15994709 BLAKE2B fc6d5d7ed831c012e99d49516c20afa0a03311131620740436421b0dfab45820cebf113810c2472357f4637040dea9b96c3a2a1c82ebc3136ece015f87b7d8ce SHA512 009cb81106996f8457c08c76a89b61689b8554ed0453715e6ea2ceee6f4bf4822f82ec2dc2aa3bd7793dd0b2462424557cf2d4a09565f6f089654cae6dce39d9
-DIST homeassistant-2022.9.1.tar.gz 16470299 BLAKE2B 981ce873971ad6cc8f06d55608270e6fdd8f9ca2c4da5d8ac4b6a8c215eb73ec90f05256e315a5b4133ae030e8d0ce48627abed1cbacf568a752bc6bf003f9eb SHA512 38b72a5dd75f42eda93835844cac6df45aaecdf3587a4a73d1956caac6c904fb9db734a78419ed19feffb6d2c7af6852c0d3e05214a356b1bd2cf209bed8f125
-DIST homeassistant-2022.9.2.tar.gz 16475751 BLAKE2B c1a0206a943c26c9a3328ba356b84d09c3c7703d0482c2e954e6df4516b1712ac65ea52c6fd18cc85fdd31914f395404021ab5cb8b6e6d4c986c2ce591feca97 SHA512 abafe4080e9917dcfbf6e0b4fa9a3fbe541020943819ef9d90a247c6f955ea9f31a66eb8804a95dd9117ed9869371c7b6c7eea63e72aebcdd8fe289392ca65a7
+DIST homeassistant-2022.9.3.tar.gz 16475639 BLAKE2B d0224cd836a7157cf5160a4a3e20351b08bbcc53e979e09917db4ead9d89ba7e425f59c1ab790d94d9b937d73a08fa7ee7440f295a922a45417b8a1e22746c12 SHA512 583f57d7d2e12cf8cdd7c55773692ff6012a0f991f9eafa6c69de7fd2eff7660e390dd387c6edcb75f0d35b602b6475fd408eef72294dd97e483c20f35aaa60c
+DIST homeassistant-2022.9.4.tar.gz 16475573 BLAKE2B 7b6bad7c5c1f5eb0daaf52bbdf0160f48422c2e9535799c196e9ec2f771a4e7fc4030c2921354e20d34cee5df3910848a0e7a8e42deb201c358d01a07e214485 SHA512 e1f3bc473a04303eaeaad6dfe87b4cb0d935bfeb396e826eca2f4f3775ab5f4caa35c963d5e80ed1fb2baded5a1305aa3f4a1e1f22e4debde5f0058c0c251e6c
 EBUILD homeassistant-full-2022.7.7-r1.ebuild 73137 BLAKE2B 9e6733c60dcb30f2435786cd37712df811df9bf9a89cfbae30533fdbb555bc6b530d48b66c38027be0450f7ef83c2e2d5f025a3bd0d7262c7d961c75b41b6f26 SHA512 52ac9c29d8591e053ea13f2f31f8165b35e3b2067aa82c8de5f2b2c099d91325a014cb786422d3b8f4a7569b81dfe1d02d5a7e6233737336cf58d0d21ae6efaa
 EBUILD homeassistant-full-2022.8.6-r1.ebuild 73747 BLAKE2B 2da71e420b929b5bc5982778be12252884e755db06df836ec30a9217ece759d3a475ce4801ee58ce6f383198d6758f6ef67ab17f4c14a55e9e040eb4c66a5bb9 SHA512 455fceb4cc4545aac1754daea3c5f4507db1a154d0a45f69e5098c0c4dd10b968427f80a5ebc78417e6134156688d157613103ddcb181c488b31454095a263da
 EBUILD homeassistant-full-2022.8.7-r1.ebuild 73747 BLAKE2B 560cadf97e9cc23ef7f4e95e72a2af84324aee1aecc027252aa4541d39b076de5deee5f04f08dc34c966caed310b46fde2149c91564962587ad8d8f80ea52b3d SHA512 e05f4f20311ef65d510061c817e7d238304eec7d680d212cbd1b2a46eb9c82c60ff0cbc377503f0f580fac8a496f716b25f21444b52bcde07b382131d42735e3
-EBUILD homeassistant-full-2022.9.1.ebuild 75209 BLAKE2B a755c9dfed3cb4e8b5b2026dcc60dc93aedd07e7a869274c7ecfa779f10b7ecddcabc35259cc1164c3631c722b16af8976189c80175d2751a3215a940dc0843e SHA512 e77c81a330ce42b444b040c222acf5a405b1fbe3ec6d788e085f1a84585caa569c74ee01598c9432cb90ecc6a0de5d32415abcb4636f17326e946ff737c4d6bc
-EBUILD homeassistant-full-2022.9.2.ebuild 75208 BLAKE2B 4cb1d95892509c368287d20fbe3ba01465927cdef7c9de56aa4d9c7857831605f5063486081433e4b162652043e7578cf036eb22ecd608461a99739889dfe032 SHA512 b8144f3195236f192456cff470c06311528d16deedfc55e2e5f4be497ec1714cd338279eb4bd840521b45d5d31544b965d224a624d8d55949f313105a228c618
-EBUILD homeassistant-full-9999.ebuild 75212 BLAKE2B 0b029bf8245032970d64e6adfad0c14544c72bef8c18d4f8e83fb8d2d9cb10a5a894ee949fcedeb230712c70707133073b55d308eff2a16b8e2c56114c7204c7 SHA512 73d280af195b08f009c499691708b3c3311fcd05da00fae76d62ebb0f08772af4ae417ea64e014af4e28ef9559fc46871e541c671bbed05aded3c0df94268e6a
+EBUILD homeassistant-full-2022.9.3.ebuild 75422 BLAKE2B d1eb7f135354477f67c38d137c942762f9663b9a6842c7c12cc42e8242372ff150ada4b32e6bb822018b35766caebd5449d3442d9d1a7ef1223462b13a4f2619 SHA512 6ee45c292d7aa3f29cccecf5fc326bf86f5405d00ebb634b2cbbbeef28b10196cdc897fab6a001ff4172c9dfa73cdd6e270585fd609742899dd9aa8a4e96aba5
+EBUILD homeassistant-full-2022.9.4.ebuild 75422 BLAKE2B 6a4b6e8a4b0f350864776bae339aba7214c021ee464c7af8e9ee058e6e2a0446ec657af14e25a731dbdf174f74fb6aabeefd301b1a8550ee747f26c88f77f4b5 SHA512 98a45bd828086eb19fef97b2edb7c4ed6778ef97255191ee80b639b79f59c3893471056eeeca9ad937ef41c0b91ba5d93a6b41a4898a886e90c2c161aa731469
+EBUILD homeassistant-full-9999.ebuild 75426 BLAKE2B fae27bec390a5064d26a17a159231942e40f36e1925bf7c0c1d3d5814116a969ef1cdd2c56a4f3e1e2f34618fffb1ec75f7b7b7a23fc6bda03ced70c69acba97 SHA512 5ba6a6002c2e0cb7bd4cfb206c33173df43633af6d5781e0ea4ac1bebef77426c9f5e22a5b3132ea7ed5b0270eb9bc87262d7716624ab9315439c4adeabedd9a
 MISC metadata.xml 81418 BLAKE2B c08c32b2afc181b40675b446cfd73d226865af60a0b8218984abf4a9d313bfa9c71a13e0a932fcfb86eaecce38e00f54b949be89d722acdd41e0cfa760de339f SHA512 05da077da160f07aaae2e1cbc86b9b465d767c578b4974eaf269db602c48904c667eca30296be38a7ba392d0521131f2771ac3e3b7d08f3c85e649c1d4a4cbe7
--- a/app-misc/homeassistant-full/homeassistant-full-2022.9.3.ebuild
+++ b/app-misc/homeassistant-full/homeassistant-full-2022.9.3.ebuild
@@ -45,7 +45,7 @@ RDEPEND="${RDEPEND}
 # Home Assistant Core dependencies
 # from package_constraints.txt
 RDEPEND="${RDEPEND}
-	~dev-python/aiodiscover-1.4.11[${PYTHON_USEDEP}]
+	~dev-python/aiodiscover-1.4.13[${PYTHON_USEDEP}]
 	~dev-python/aiohttp-3.8.1[${PYTHON_USEDEP}]
 	~dev-python/aiohttp-cors-0.7.0[${PYTHON_USEDEP}]
 	~dev-python/anyio-3.6.1[${PYTHON_USEDEP}]
@@ -58,20 +58,22 @@ RDEPEND="${RDEPEND}
 	~dev-python/awesomeversion-22.8.0[${PYTHON_USEDEP}]
 	<dev-python/backoff-2.0[${PYTHON_USEDEP}]
 	~dev-python/bcrypt-3.1.7[${PYTHON_USEDEP}]
-	~dev-python/bleak-0.16.0[${PYTHON_USEDEP}]
+	~dev-python/bleak-retry-connector-1.15.1[${PYTHON_USEDEP}]
+	~dev-python/bleak-0.17.0[${PYTHON_USEDEP}]
 	~dev-python/bluetooth-adapters-0.4.1[${PYTHON_USEDEP}]
-	~dev-python/bluetooth-auto-recovery-0.3.2[${PYTHON_USEDEP}]
+	~dev-python/bluetooth-auto-recovery-0.3.3[${PYTHON_USEDEP}]
 	>=dev-python/btlewrap-0.0.10[${PYTHON_USEDEP}]
 	>=dev-python/certifi-2021.5.30[${PYTHON_USEDEP}]
 	~dev-python/ciso8601-2.2.0[${PYTHON_USEDEP}]
 	~dev-python/cryptography-37.0.4[${PYTHON_USEDEP}]
+	~dev-python/dbus-fast-1.4.0[${PYTHON_USEDEP}]
 	~dev-python/fnvhash-0.1.0[${PYTHON_USEDEP}]
 	~dev-python/grpcio-status-1.48.0[${PYTHON_USEDEP}]
 	~dev-python/grpcio-1.48.0[${PYTHON_USEDEP}]
 	~dev-python/h11-0.12.0[${PYTHON_USEDEP}]
 	~dev-python/hass-nabucasa-0.55.0[${PYTHON_USEDEP}]
 	~dev-python/home-assistant-bluetooth-1.3.0[${PYTHON_USEDEP}]
-	~dev-python/home-assistant-frontend-20220907.0[${PYTHON_USEDEP}]
+	~dev-python/home-assistant-frontend-20220907.1[${PYTHON_USEDEP}]
 	~dev-python/httpcore-0.15.0[${PYTHON_USEDEP}]
 	>=dev-python/httplib2-0.19.0[${PYTHON_USEDEP}]
 	~dev-python/httpx-0.23.0[${PYTHON_USEDEP}]
@@ -201,13 +203,13 @@ RDEPEND="${RDEPEND}
 	bizkaibus? ( ~dev-python/bizkaibus-0.1.1[${PYTHON_USEDEP}] )
 	blackbird? ( ~dev-python/pyblackbird-0.5[${PYTHON_USEDEP}] )
 	blebox? ( ~dev-python/blebox-uniapi-2.0.2[${PYTHON_USEDEP}] )
-	blink? ( ~dev-python/blinkpy-0.19.0[${PYTHON_USEDEP}] )
+	blink? ( ~dev-python/blinkpy-0.19.2[${PYTHON_USEDEP}] )
 	blinksticklight? ( ~dev-python/BlinkStick-1.2.0[${PYTHON_USEDEP}] )
 	blinkt? ( ~dev-python/blinkt-0.1.0[${PYTHON_USEDEP}] )
 	blockchain? ( ~dev-python/python-blockchain-api-0.0.2[${PYTHON_USEDEP}] )
 	bluemaestro? ( ~dev-python/bluemaestro-ble-0.2.0[${PYTHON_USEDEP}] )
 	bluesound? ( ~dev-python/xmltodict-0.13.0[${PYTHON_USEDEP}] )
-	bluetooth? ( ~dev-python/bleak-0.16.0[${PYTHON_USEDEP}] ~dev-python/bluetooth-adapters-0.4.1[${PYTHON_USEDEP}] ~dev-python/bluetooth-auto-recovery-0.3.2[${PYTHON_USEDEP}] )
+	bluetooth? ( ~dev-python/bleak-0.17.0[${PYTHON_USEDEP}] ~dev-python/bleak-retry-connector-1.15.1[${PYTHON_USEDEP}] ~dev-python/bluetooth-adapters-0.4.1[${PYTHON_USEDEP}] ~dev-python/bluetooth-auto-recovery-0.3.3[${PYTHON_USEDEP}] ~dev-python/dbus-fast-1.4.0[${PYTHON_USEDEP}] )
 	bluetooth_le_tracker? ( ~dev-python/pygatt-4.0.5[${PYTHON_USEDEP}] )
 	bluetooth_tracker? ( ~dev-python/bt-proximity-0.2.1[${PYTHON_USEDEP}] ~dev-python/pybluez-0.22[${PYTHON_USEDEP}] )
 	bme280? ( ~dev-python/i2csense-0.0.4[${PYTHON_USEDEP}] ~dev-python/smbus-cffi-0.5.1[${PYTHON_USEDEP}] ~dev-python/bme280spi-0.2.0[${PYTHON_USEDEP}] )
@@ -269,7 +271,7 @@ RDEPEND="${RDEPEND}
 	devolo_home_control? ( ~dev-python/devolo-home-control-api-0.18.2[${PYTHON_USEDEP}] )
 	devolo_home_network? ( ~dev-python/devolo-plc-api-0.8.0[${PYTHON_USEDEP}] )
 	dexcom? ( ~dev-python/pydexcom-0.2.3[${PYTHON_USEDEP}] )
-	dhcp? ( ~net-analyzer/scapy-2.4.5 ~dev-python/aiodiscover-1.4.11[${PYTHON_USEDEP}] )
+	dhcp? ( ~net-analyzer/scapy-2.4.5 ~dev-python/aiodiscover-1.4.13[${PYTHON_USEDEP}] )
 	dht? ( ~dev-python/adafruit-circuitpython-dht-3.7.0[${PYTHON_USEDEP}] ~dev-python/RPi-GPIO-0.7.1_alpha4[${PYTHON_USEDEP}] )
 	digitalloggers? ( ~dev-python/dlipower-0.7.165[${PYTHON_USEDEP}] )
 	digital_ocean? ( ~dev-python/python-digitalocean-1.13.2[${PYTHON_USEDEP}] )
@@ -406,7 +408,7 @@ RDEPEND="${RDEPEND}
 	google_pubsub? ( ~dev-python/google-cloud-pubsub-2.11.0[${PYTHON_USEDEP}] )
 	google_translate? ( ~dev-python/gTTS-2.2.4[${PYTHON_USEDEP}] )
 	google_travel_time? ( ~dev-python/googlemaps-2.5.1[${PYTHON_USEDEP}] )
-	govee_ble? ( ~dev-python/govee-ble-0.17.2[${PYTHON_USEDEP}] )
+	govee_ble? ( ~dev-python/govee-ble-0.17.3[${PYTHON_USEDEP}] )
 	gpmdp? ( ~dev-python/websocket-client-0.54.0[${PYTHON_USEDEP}] )
 	gpsd? ( ~dev-python/gps3-0.33.3[${PYTHON_USEDEP}] )
 	gree? ( ~dev-python/greeclimate-1.3.0[${PYTHON_USEDEP}] )
@@ -430,7 +432,7 @@ RDEPEND="${RDEPEND}
 	hive? ( ~dev-python/pyhiveapi-0.5.13[${PYTHON_USEDEP}] )
 	hlk_sw16? ( ~dev-python/hlk-sw16-0.0.9[${PYTHON_USEDEP}] )
 	homekit? ( ~dev-python/HAP-python-4.5.0[${PYTHON_USEDEP}] ~dev-python/fnvhash-0.1.0[${PYTHON_USEDEP}] ~dev-python/pyqrcode-1.2.1[${PYTHON_USEDEP}] ~dev-python/base36-0.1.1[${PYTHON_USEDEP}] )
-	homekit_controller? ( ~dev-python/aiohomekit-1.5.6[${PYTHON_USEDEP}] )
+	homekit_controller? ( ~dev-python/aiohomekit-1.5.7[${PYTHON_USEDEP}] )
 	homematic? ( ~dev-python/pyhomematic-0.1.77[${PYTHON_USEDEP}] )
 	homematicip_cloud? ( ~dev-python/homematicip-1.0.7[${PYTHON_USEDEP}] )
 	homewizard? ( ~dev-python/python-homewizard-energy-1.1.0[${PYTHON_USEDEP}] )
@@ -471,7 +473,7 @@ RDEPEND="${RDEPEND}
 	iota? ( ~dev-python/PyOTA-2.0.5[${PYTHON_USEDEP}] )
 	iotawatt? ( ~dev-python/iotawattpy-0.1.0[${PYTHON_USEDEP}] )
 	iperf3? ( ~dev-python/iperf3-0.1.11[${PYTHON_USEDEP}] )
-	ipma? ( ~dev-python/pyipma-3.0.2[${PYTHON_USEDEP}] )
+	ipma? ( ~dev-python/pyipma-3.0.4[${PYTHON_USEDEP}] )
 	ipp? ( ~dev-python/pyipp-0.11.0[${PYTHON_USEDEP}] )
 	iqvia? ( ~dev-python/numpy-1.23.2[${PYTHON_USEDEP}] ~dev-python/pyiqvia-2022.4.0[${PYTHON_USEDEP}] )
 	irish_rail_transport? ( ~dev-python/pyirishrail-0.0.2[${PYTHON_USEDEP}] )
@@ -510,7 +512,7 @@ RDEPEND="${RDEPEND}
 	launch_library? ( ~dev-python/pylaunches-1.3.0[${PYTHON_USEDEP}] )
 	laundrify? ( ~dev-python/laundrify-aio-1.1.2[${PYTHON_USEDEP}] )
 	lcn? ( ~dev-python/pypck-0.7.15[${PYTHON_USEDEP}] )
-	led_ble? ( ~dev-python/led-ble-0.9.1[${PYTHON_USEDEP}] )
+	led_ble? ( ~dev-python/led-ble-0.10.0[${PYTHON_USEDEP}] )
 	lg_netcast? ( ~dev-python/pylgnetcast-0.3.7[${PYTHON_USEDEP}] )
 	lg_soundbar? ( ~dev-python/temescal-0.5[${PYTHON_USEDEP}] )
 	life360? ( ~dev-python/life360-4.1.1[${PYTHON_USEDEP}] )
@@ -844,7 +846,7 @@ RDEPEND="${RDEPEND}
 	surepetcare? ( ~dev-python/surepy-0.7.2[${PYTHON_USEDEP}] )
 	swiss_hydrological_data? ( ~dev-python/swisshydrodata-0.1.0[${PYTHON_USEDEP}] )
 	swiss_public_transport? ( ~dev-python/python-opendata-transport-0.3.0[${PYTHON_USEDEP}] )
-	switchbot? ( ~dev-python/PySwitchbot-0.19.5[${PYTHON_USEDEP}] )
+	switchbot? ( ~dev-python/PySwitchbot-0.19.8[${PYTHON_USEDEP}] )
 	switcher_kis? ( ~dev-python/aioswitcher-2.0.6[${PYTHON_USEDEP}] )
 	switchmate? ( ~dev-python/PySwitchmate-0.5.1[${PYTHON_USEDEP}] )
 	syncthing? ( ~dev-python/aiosyncthing-0.5.1[${PYTHON_USEDEP}] )
@@ -932,7 +934,7 @@ RDEPEND="${RDEPEND}
 	versasense? ( ~dev-python/pyversasense-0.0.6[${PYTHON_USEDEP}] )
 	version? ( ~dev-python/pyhaversion-22.8.0[${PYTHON_USEDEP}] )
 	vesync? ( ~dev-python/pyvesync-2.0.3[${PYTHON_USEDEP}] )
-	vicare? ( ~dev-python/PyViCare-2.16.2[${PYTHON_USEDEP}] )
+	vicare? ( ~dev-python/PyViCare-2.17.0[${PYTHON_USEDEP}] )
 	vilfo? ( ~dev-python/vilfo-api-client-0.3.2[${PYTHON_USEDEP}] )
 	vivotek? ( ~dev-python/libpyvivotek-0.4.0[${PYTHON_USEDEP}] )
 	vizio? ( ~dev-python/pyvizio-0.1.57[${PYTHON_USEDEP}] )
@@ -971,12 +973,12 @@ RDEPEND="${RDEPEND}
 	xbox_live? ( ~dev-python/xboxapi-2.0.1[${PYTHON_USEDEP}] )
 	xeoma? ( ~dev-python/pyxeoma-1.4.1[${PYTHON_USEDEP}] )
 	xiaomi_aqara? ( ~dev-python/PyXiaomiGateway-0.13.4[${PYTHON_USEDEP}] )
-	xiaomi_ble? ( ~dev-python/xiaomi-ble-0.9.0[${PYTHON_USEDEP}] )
+	xiaomi_ble? ( ~dev-python/xiaomi-ble-0.10.0[${PYTHON_USEDEP}] )
 	xiaomi_miio? ( ~dev-python/construct-2.10.56[${PYTHON_USEDEP}] ~dev-python/micloud-0.5[${PYTHON_USEDEP}] ~dev-python/python-miio-0.5.12[${PYTHON_USEDEP}] )
 	xiaomi_tv? ( ~dev-python/pymitv-1.4.3[${PYTHON_USEDEP}] )
 	xmpp? ( ~dev-python/slixmpp-1.8.2[${PYTHON_USEDEP}] )
 	xs1? ( ~dev-python/xs1-api-client-3.0.0[${PYTHON_USEDEP}] )
-	yalexs_ble? ( ~dev-python/yalexs-ble-1.8.1[${PYTHON_USEDEP}] )
+	yalexs_ble? ( ~dev-python/yalexs-ble-1.9.0[${PYTHON_USEDEP}] )
 	yale_smart_alarm? ( ~dev-python/yalesmartalarmclient-0.3.9[${PYTHON_USEDEP}] )
 	yamaha? ( ~dev-python/rxv-0.7.0[${PYTHON_USEDEP}] )
 	yamaha_musiccast? ( ~dev-python/aiomusiccast-0.14.4[${PYTHON_USEDEP}] )
--- a/app-misc/homeassistant-full/homeassistant-full-2022.9.4.ebuild
+++ b/app-misc/homeassistant-full/homeassistant-full-2022.9.4.ebuild
@@ -45,7 +45,7 @@ RDEPEND="${RDEPEND}
 # Home Assistant Core dependencies
 # from package_constraints.txt
 RDEPEND="${RDEPEND}
-	~dev-python/aiodiscover-1.4.11[${PYTHON_USEDEP}]
+	~dev-python/aiodiscover-1.4.13[${PYTHON_USEDEP}]
 	~dev-python/aiohttp-3.8.1[${PYTHON_USEDEP}]
 	~dev-python/aiohttp-cors-0.7.0[${PYTHON_USEDEP}]
 	~dev-python/anyio-3.6.1[${PYTHON_USEDEP}]
@@ -58,20 +58,22 @@ RDEPEND="${RDEPEND}
 	~dev-python/awesomeversion-22.8.0[${PYTHON_USEDEP}]
 	<dev-python/backoff-2.0[${PYTHON_USEDEP}]
 	~dev-python/bcrypt-3.1.7[${PYTHON_USEDEP}]
-	~dev-python/bleak-0.16.0[${PYTHON_USEDEP}]
-	~dev-python/bluetooth-adapters-0.3.5[${PYTHON_USEDEP}]
-	~dev-python/bluetooth-auto-recovery-0.3.2[${PYTHON_USEDEP}]
+	~dev-python/bleak-retry-connector-1.15.1[${PYTHON_USEDEP}]
+	~dev-python/bleak-0.17.0[${PYTHON_USEDEP}]
+	~dev-python/bluetooth-adapters-0.4.1[${PYTHON_USEDEP}]
+	~dev-python/bluetooth-auto-recovery-0.3.3[${PYTHON_USEDEP}]
 	>=dev-python/btlewrap-0.0.10[${PYTHON_USEDEP}]
 	>=dev-python/certifi-2021.5.30[${PYTHON_USEDEP}]
 	~dev-python/ciso8601-2.2.0[${PYTHON_USEDEP}]
 	~dev-python/cryptography-37.0.4[${PYTHON_USEDEP}]
+	~dev-python/dbus-fast-1.4.0[${PYTHON_USEDEP}]
 	~dev-python/fnvhash-0.1.0[${PYTHON_USEDEP}]
 	~dev-python/grpcio-status-1.48.0[${PYTHON_USEDEP}]
 	~dev-python/grpcio-1.48.0[${PYTHON_USEDEP}]
 	~dev-python/h11-0.12.0[${PYTHON_USEDEP}]
 	~dev-python/hass-nabucasa-0.55.0[${PYTHON_USEDEP}]
 	~dev-python/home-assistant-bluetooth-1.3.0[${PYTHON_USEDEP}]
-	~dev-python/home-assistant-frontend-20220907.0[${PYTHON_USEDEP}]
+	~dev-python/home-assistant-frontend-20220907.2[${PYTHON_USEDEP}]
 	~dev-python/httpcore-0.15.0[${PYTHON_USEDEP}]
 	>=dev-python/httplib2-0.19.0[${PYTHON_USEDEP}]
 	~dev-python/httpx-0.23.0[${PYTHON_USEDEP}]
@@ -201,13 +203,13 @@ RDEPEND="${RDEPEND}
 	bizkaibus? ( ~dev-python/bizkaibus-0.1.1[${PYTHON_USEDEP}] )
 	blackbird? ( ~dev-python/pyblackbird-0.5[${PYTHON_USEDEP}] )
 	blebox? ( ~dev-python/blebox-uniapi-2.0.2[${PYTHON_USEDEP}] )
-	blink? ( ~dev-python/blinkpy-0.19.0[${PYTHON_USEDEP}] )
+	blink? ( ~dev-python/blinkpy-0.19.2[${PYTHON_USEDEP}] )
 	blinksticklight? ( ~dev-python/BlinkStick-1.2.0[${PYTHON_USEDEP}] )
 	blinkt? ( ~dev-python/blinkt-0.1.0[${PYTHON_USEDEP}] )
 	blockchain? ( ~dev-python/python-blockchain-api-0.0.2[${PYTHON_USEDEP}] )
 	bluemaestro? ( ~dev-python/bluemaestro-ble-0.2.0[${PYTHON_USEDEP}] )
 	bluesound? ( ~dev-python/xmltodict-0.13.0[${PYTHON_USEDEP}] )
-	bluetooth? ( ~dev-python/bleak-0.16.0[${PYTHON_USEDEP}] ~dev-python/bluetooth-adapters-0.3.5[${PYTHON_USEDEP}] ~dev-python/bluetooth-auto-recovery-0.3.2[${PYTHON_USEDEP}] )
+	bluetooth? ( ~dev-python/bleak-0.17.0[${PYTHON_USEDEP}] ~dev-python/bleak-retry-connector-1.15.1[${PYTHON_USEDEP}] ~dev-python/bluetooth-adapters-0.4.1[${PYTHON_USEDEP}] ~dev-python/bluetooth-auto-recovery-0.3.3[${PYTHON_USEDEP}] ~dev-python/dbus-fast-1.4.0[${PYTHON_USEDEP}] )
 	bluetooth_le_tracker? ( ~dev-python/pygatt-4.0.5[${PYTHON_USEDEP}] )
 	bluetooth_tracker? ( ~dev-python/bt-proximity-0.2.1[${PYTHON_USEDEP}] ~dev-python/pybluez-0.22[${PYTHON_USEDEP}] )
 	bme280? ( ~dev-python/i2csense-0.0.4[${PYTHON_USEDEP}] ~dev-python/smbus-cffi-0.5.1[${PYTHON_USEDEP}] ~dev-python/bme280spi-0.2.0[${PYTHON_USEDEP}] )
@@ -269,7 +271,7 @@ RDEPEND="${RDEPEND}
 	devolo_home_control? ( ~dev-python/devolo-home-control-api-0.18.2[${PYTHON_USEDEP}] )
 	devolo_home_network? ( ~dev-python/devolo-plc-api-0.8.0[${PYTHON_USEDEP}] )
 	dexcom? ( ~dev-python/pydexcom-0.2.3[${PYTHON_USEDEP}] )
-	dhcp? ( ~net-analyzer/scapy-2.4.5 ~dev-python/aiodiscover-1.4.11[${PYTHON_USEDEP}] )
+	dhcp? ( ~net-analyzer/scapy-2.4.5 ~dev-python/aiodiscover-1.4.13[${PYTHON_USEDEP}] )
 	dht? ( ~dev-python/adafruit-circuitpython-dht-3.7.0[${PYTHON_USEDEP}] ~dev-python/RPi-GPIO-0.7.1_alpha4[${PYTHON_USEDEP}] )
 	digitalloggers? ( ~dev-python/dlipower-0.7.165[${PYTHON_USEDEP}] )
 	digital_ocean? ( ~dev-python/python-digitalocean-1.13.2[${PYTHON_USEDEP}] )
@@ -300,7 +302,7 @@ RDEPEND="${RDEPEND}
 	ecobee? ( ~dev-python/python-ecobee-api-0.2.14[${PYTHON_USEDEP}] )
 	econet? ( ~dev-python/pyeconet-0.1.15[${PYTHON_USEDEP}] )
 	ecovacs? ( ~dev-python/py-sucks-0.9.8[${PYTHON_USEDEP}] )
-	ecowitt? ( ~dev-python/aioecowitt-2022.8.3[${PYTHON_USEDEP}] )
+	ecowitt? ( ~dev-python/aioecowitt-2022.9.1[${PYTHON_USEDEP}] )
 	eddystone_temperature? ( ~dev-python/beacontools-1.2.3[${PYTHON_USEDEP}] ~dev-python/construct-2.10.56[${PYTHON_USEDEP}] )
 	edimax? ( ~dev-python/pyedimax-0.2.1[${PYTHON_USEDEP}] )
 	edl21? ( ~dev-python/pysml-0.0.8[${PYTHON_USEDEP}] )
@@ -406,7 +408,7 @@ RDEPEND="${RDEPEND}
 	google_pubsub? ( ~dev-python/google-cloud-pubsub-2.11.0[${PYTHON_USEDEP}] )
 	google_translate? ( ~dev-python/gTTS-2.2.4[${PYTHON_USEDEP}] )
 	google_travel_time? ( ~dev-python/googlemaps-2.5.1[${PYTHON_USEDEP}] )
-	govee_ble? ( ~dev-python/govee-ble-0.17.2[${PYTHON_USEDEP}] )
+	govee_ble? ( ~dev-python/govee-ble-0.17.3[${PYTHON_USEDEP}] )
 	gpmdp? ( ~dev-python/websocket-client-0.54.0[${PYTHON_USEDEP}] )
 	gpsd? ( ~dev-python/gps3-0.33.3[${PYTHON_USEDEP}] )
 	gree? ( ~dev-python/greeclimate-1.3.0[${PYTHON_USEDEP}] )
@@ -430,7 +432,7 @@ RDEPEND="${RDEPEND}
 	hive? ( ~dev-python/pyhiveapi-0.5.13[${PYTHON_USEDEP}] )
 	hlk_sw16? ( ~dev-python/hlk-sw16-0.0.9[${PYTHON_USEDEP}] )
 	homekit? ( ~dev-python/HAP-python-4.5.0[${PYTHON_USEDEP}] ~dev-python/fnvhash-0.1.0[${PYTHON_USEDEP}] ~dev-python/pyqrcode-1.2.1[${PYTHON_USEDEP}] ~dev-python/base36-0.1.1[${PYTHON_USEDEP}] )
-	homekit_controller? ( ~dev-python/aiohomekit-1.5.2[${PYTHON_USEDEP}] )
+	homekit_controller? ( ~dev-python/aiohomekit-1.5.7[${PYTHON_USEDEP}] )
 	homematic? ( ~dev-python/pyhomematic-0.1.77[${PYTHON_USEDEP}] )
 	homematicip_cloud? ( ~dev-python/homematicip-1.0.7[${PYTHON_USEDEP}] )
 	homewizard? ( ~dev-python/python-homewizard-energy-1.1.0[${PYTHON_USEDEP}] )
@@ -471,7 +473,7 @@ RDEPEND="${RDEPEND}
 	iota? ( ~dev-python/PyOTA-2.0.5[${PYTHON_USEDEP}] )
 	iotawatt? ( ~dev-python/iotawattpy-0.1.0[${PYTHON_USEDEP}] )
 	iperf3? ( ~dev-python/iperf3-0.1.11[${PYTHON_USEDEP}] )
-	ipma? ( ~dev-python/pyipma-3.0.2[${PYTHON_USEDEP}] )
+	ipma? ( ~dev-python/pyipma-3.0.4[${PYTHON_USEDEP}] )
 	ipp? ( ~dev-python/pyipp-0.11.0[${PYTHON_USEDEP}] )
 	iqvia? ( ~dev-python/numpy-1.23.2[${PYTHON_USEDEP}] ~dev-python/pyiqvia-2022.4.0[${PYTHON_USEDEP}] )
 	irish_rail_transport? ( ~dev-python/pyirishrail-0.0.2[${PYTHON_USEDEP}] )
@@ -510,7 +512,7 @@ RDEPEND="${RDEPEND}
 	launch_library? ( ~dev-python/pylaunches-1.3.0[${PYTHON_USEDEP}] )
 	laundrify? ( ~dev-python/laundrify-aio-1.1.2[${PYTHON_USEDEP}] )
 	lcn? ( ~dev-python/pypck-0.7.15[${PYTHON_USEDEP}] )
-	led_ble? ( ~dev-python/led-ble-0.7.1[${PYTHON_USEDEP}] )
+	led_ble? ( ~dev-python/led-ble-0.10.0[${PYTHON_USEDEP}] )
 	lg_netcast? ( ~dev-python/pylgnetcast-0.3.7[${PYTHON_USEDEP}] )
 	lg_soundbar? ( ~dev-python/temescal-0.5[${PYTHON_USEDEP}] )
 	life360? ( ~dev-python/life360-4.1.1[${PYTHON_USEDEP}] )
@@ -714,7 +716,7 @@ RDEPEND="${RDEPEND}
 	rainbird? ( ~dev-python/pyrainbird-0.4.3[${PYTHON_USEDEP}] )
 	raincloud? ( ~dev-python/raincloudy-0.0.7[${PYTHON_USEDEP}] )
 	rainforest_eagle? ( ~dev-python/aioeagle-1.1.0[${PYTHON_USEDEP}] ~dev-python/eagle100-0.1.1[${PYTHON_USEDEP}] )
-	rainmachine? ( ~dev-python/regenmaschine-2022.9.0[${PYTHON_USEDEP}] )
+	rainmachine? ( ~dev-python/regenmaschine-2022.9.1[${PYTHON_USEDEP}] )
 	raspihats? ( ~dev-python/raspihats-2.2.3[${PYTHON_USEDEP}] ~dev-python/smbus-cffi-0.5.1[${PYTHON_USEDEP}] )
 	raspyrfm? ( ~dev-python/raspyrfm-client-1.2.8[${PYTHON_USEDEP}] )
 	rdw? ( ~dev-python/vehicle-0.4.0[${PYTHON_USEDEP}] )
@@ -764,7 +766,7 @@ RDEPEND="${RDEPEND}
 	sense? ( ~dev-python/sense-energy-0.10.4[${PYTHON_USEDEP}] )
 	sensehat? ( ~dev-python/python-sense-hat-2.2.0[${PYTHON_USEDEP}] )
 	senseme? ( ~dev-python/aiosenseme-0.6.1[${PYTHON_USEDEP}] )
-	sensibo? ( ~dev-python/pysensibo-1.0.19[${PYTHON_USEDEP}] )
+	sensibo? ( ~dev-python/pysensibo-1.0.20[${PYTHON_USEDEP}] )
 	sensorpro? ( ~dev-python/sensorpro-ble-0.5.0[${PYTHON_USEDEP}] )
 	sensorpush? ( ~dev-python/sensorpush-ble-1.5.2[${PYTHON_USEDEP}] )
 	sentry? ( ~dev-python/sentry-sdk-1.9.5[${PYTHON_USEDEP}] )
@@ -844,7 +846,7 @@ RDEPEND="${RDEPEND}
 	surepetcare? ( ~dev-python/surepy-0.7.2[${PYTHON_USEDEP}] )
 	swiss_hydrological_data? ( ~dev-python/swisshydrodata-0.1.0[${PYTHON_USEDEP}] )
 	swiss_public_transport? ( ~dev-python/python-opendata-transport-0.3.0[${PYTHON_USEDEP}] )
-	switchbot? ( ~dev-python/PySwitchbot-0.18.27[${PYTHON_USEDEP}] )
+	switchbot? ( ~dev-python/PySwitchbot-0.19.8[${PYTHON_USEDEP}] )
 	switcher_kis? ( ~dev-python/aioswitcher-2.0.6[${PYTHON_USEDEP}] )
 	switchmate? ( ~dev-python/PySwitchmate-0.5.1[${PYTHON_USEDEP}] )
 	syncthing? ( ~dev-python/aiosyncthing-0.5.1[${PYTHON_USEDEP}] )
@@ -932,7 +934,7 @@ RDEPEND="${RDEPEND}
 	versasense? ( ~dev-python/pyversasense-0.0.6[${PYTHON_USEDEP}] )
 	version? ( ~dev-python/pyhaversion-22.8.0[${PYTHON_USEDEP}] )
 	vesync? ( ~dev-python/pyvesync-2.0.3[${PYTHON_USEDEP}] )
-	vicare? ( ~dev-python/PyViCare-2.16.2[${PYTHON_USEDEP}] )
+	vicare? ( ~dev-python/PyViCare-2.17.0[${PYTHON_USEDEP}] )
 	vilfo? ( ~dev-python/vilfo-api-client-0.3.2[${PYTHON_USEDEP}] )
 	vivotek? ( ~dev-python/libpyvivotek-0.4.0[${PYTHON_USEDEP}] )
 	vizio? ( ~dev-python/pyvizio-0.1.57[${PYTHON_USEDEP}] )
@@ -971,12 +973,12 @@ RDEPEND="${RDEPEND}
 	xbox_live? ( ~dev-python/xboxapi-2.0.1[${PYTHON_USEDEP}] )
 	xeoma? ( ~dev-python/pyxeoma-1.4.1[${PYTHON_USEDEP}] )
 	xiaomi_aqara? ( ~dev-python/PyXiaomiGateway-0.13.4[${PYTHON_USEDEP}] )
-	xiaomi_ble? ( ~dev-python/xiaomi-ble-0.9.0[${PYTHON_USEDEP}] )
+	xiaomi_ble? ( ~dev-python/xiaomi-ble-0.10.0[${PYTHON_USEDEP}] )
 	xiaomi_miio? ( ~dev-python/construct-2.10.56[${PYTHON_USEDEP}] ~dev-python/micloud-0.5[${PYTHON_USEDEP}] ~dev-python/python-miio-0.5.12[${PYTHON_USEDEP}] )
 	xiaomi_tv? ( ~dev-python/pymitv-1.4.3[${PYTHON_USEDEP}] )
 	xmpp? ( ~dev-python/slixmpp-1.8.2[${PYTHON_USEDEP}] )
 	xs1? ( ~dev-python/xs1-api-client-3.0.0[${PYTHON_USEDEP}] )
-	yalexs_ble? ( ~dev-python/yalexs-ble-1.6.4[${PYTHON_USEDEP}] )
+	yalexs_ble? ( ~dev-python/yalexs-ble-1.9.0[${PYTHON_USEDEP}] )
 	yale_smart_alarm? ( ~dev-python/yalesmartalarmclient-0.3.9[${PYTHON_USEDEP}] )
 	yamaha? ( ~dev-python/rxv-0.7.0[${PYTHON_USEDEP}] )
 	yamaha_musiccast? ( ~dev-python/aiomusiccast-0.14.4[${PYTHON_USEDEP}] )
@@ -991,7 +993,7 @@ RDEPEND="${RDEPEND}
 	zeroconf? ( ~dev-python/zeroconf-0.39.1[${PYTHON_USEDEP}] )
 	zerproc? ( ~dev-python/pyzerproc-0.4.8[${PYTHON_USEDEP}] )
 	zestimate? ( ~dev-python/xmltodict-0.13.0[${PYTHON_USEDEP}] )
-	zha? ( ~dev-python/bellows-0.33.1[${PYTHON_USEDEP}] ~dev-python/pyserial-3.5[${PYTHON_USEDEP}] ~dev-python/pyserial-asyncio-0.6[${PYTHON_USEDEP}] ~dev-python/zha-quirks-0.0.79[${PYTHON_USEDEP}] ~dev-python/zigpy-deconz-0.18.0[${PYTHON_USEDEP}] ~dev-python/zigpy-0.50.2[${PYTHON_USEDEP}] ~dev-python/zigpy-xbee-0.15.0[${PYTHON_USEDEP}] ~dev-python/zigpy-zigate-0.9.2[${PYTHON_USEDEP}] ~dev-python/zigpy-znp-0.8.2[${PYTHON_USEDEP}] )
+	zha? ( ~dev-python/bellows-0.33.1[${PYTHON_USEDEP}] ~dev-python/pyserial-3.5[${PYTHON_USEDEP}] ~dev-python/pyserial-asyncio-0.6[${PYTHON_USEDEP}] ~dev-python/zha-quirks-0.0.79[${PYTHON_USEDEP}] ~dev-python/zigpy-deconz-0.18.1[${PYTHON_USEDEP}] ~dev-python/zigpy-0.50.3[${PYTHON_USEDEP}] ~dev-python/zigpy-xbee-0.15.0[${PYTHON_USEDEP}] ~dev-python/zigpy-zigate-0.9.2[${PYTHON_USEDEP}] ~dev-python/zigpy-znp-0.8.2[${PYTHON_USEDEP}] )
 	zhong_hong? ( ~dev-python/zhong-hong-hvac-1.0.9[${PYTHON_USEDEP}] )
 	ziggo_mediabox_xl? ( ~dev-python/ziggo-mediabox-xl-1.1.0[${PYTHON_USEDEP}] )
 	zoneminder? ( ~dev-python/zm-py-0.5.2[${PYTHON_USEDEP}] )
--- a/app-misc/homeassistant-full/homeassistant-full-9999.ebuild
+++ b/app-misc/homeassistant-full/homeassistant-full-9999.ebuild
@@ -45,7 +45,7 @@ RDEPEND="${RDEPEND}
 # Home Assistant Core dependencies
 # from package_constraints.txt
 RDEPEND="${RDEPEND}
-	~dev-python/aiodiscover-1.4.11[${PYTHON_USEDEP}]
+	~dev-python/aiodiscover-1.4.13[${PYTHON_USEDEP}]
 	~dev-python/aiohttp-3.8.1[${PYTHON_USEDEP}]
 	~dev-python/aiohttp-cors-0.7.0[${PYTHON_USEDEP}]
 	~dev-python/anyio-3.6.1[${PYTHON_USEDEP}]
@@ -58,20 +58,22 @@ RDEPEND="${RDEPEND}
 	~dev-python/awesomeversion-22.8.0[${PYTHON_USEDEP}]
 	<dev-python/backoff-2.0[${PYTHON_USEDEP}]
 	~dev-python/bcrypt-3.1.7[${PYTHON_USEDEP}]
-	~dev-python/bleak-0.16.0[${PYTHON_USEDEP}]
+	~dev-python/bleak-retry-connector-1.15.1[${PYTHON_USEDEP}]
+	~dev-python/bleak-0.17.0[${PYTHON_USEDEP}]
 	~dev-python/bluetooth-adapters-0.4.1[${PYTHON_USEDEP}]
-	~dev-python/bluetooth-auto-recovery-0.3.2[${PYTHON_USEDEP}]
+	~dev-python/bluetooth-auto-recovery-0.3.3[${PYTHON_USEDEP}]
 	>=dev-python/btlewrap-0.0.10[${PYTHON_USEDEP}]
 	>=dev-python/certifi-2021.5.30[${PYTHON_USEDEP}]
 	~dev-python/ciso8601-2.2.0[${PYTHON_USEDEP}]
 	~dev-python/cryptography-37.0.4[${PYTHON_USEDEP}]
+	~dev-python/dbus-fast-1.4.0[${PYTHON_USEDEP}]
 	~dev-python/fnvhash-0.1.0[${PYTHON_USEDEP}]
 	~dev-python/grpcio-status-1.48.0[${PYTHON_USEDEP}]
 	~dev-python/grpcio-1.48.0[${PYTHON_USEDEP}]
 	~dev-python/h11-0.12.0[${PYTHON_USEDEP}]
 	~dev-python/hass-nabucasa-0.55.0[${PYTHON_USEDEP}]
 	~dev-python/home-assistant-bluetooth-1.3.0[${PYTHON_USEDEP}]
-	~dev-python/home-assistant-frontend-20220907.0[${PYTHON_USEDEP}]
+	~dev-python/home-assistant-frontend-20220907.2[${PYTHON_USEDEP}]
 	~dev-python/httpcore-0.15.0[${PYTHON_USEDEP}]
 	>=dev-python/httplib2-0.19.0[${PYTHON_USEDEP}]
 	~dev-python/httpx-0.23.0[${PYTHON_USEDEP}]
@@ -201,13 +203,13 @@ RDEPEND="${RDEPEND}
 	bizkaibus? ( ~dev-python/bizkaibus-0.1.1[${PYTHON_USEDEP}] )
 	blackbird? ( ~dev-python/pyblackbird-0.5[${PYTHON_USEDEP}] )
 	blebox? ( ~dev-python/blebox-uniapi-2.0.2[${PYTHON_USEDEP}] )
-	blink? ( ~dev-python/blinkpy-0.19.0[${PYTHON_USEDEP}] )
+	blink? ( ~dev-python/blinkpy-0.19.2[${PYTHON_USEDEP}] )
 	blinksticklight? ( ~dev-python/BlinkStick-1.2.0[${PYTHON_USEDEP}] )
 	blinkt? ( ~dev-python/blinkt-0.1.0[${PYTHON_USEDEP}] )
 	blockchain? ( ~dev-python/python-blockchain-api-0.0.2[${PYTHON_USEDEP}] )
 	bluemaestro? ( ~dev-python/bluemaestro-ble-0.2.0[${PYTHON_USEDEP}] )
 	bluesound? ( ~dev-python/xmltodict-0.13.0[${PYTHON_USEDEP}] )
-	bluetooth? ( ~dev-python/bleak-0.16.0[${PYTHON_USEDEP}] ~dev-python/bluetooth-adapters-0.4.1[${PYTHON_USEDEP}] ~dev-python/bluetooth-auto-recovery-0.3.2[${PYTHON_USEDEP}] )
+	bluetooth? ( ~dev-python/bleak-0.17.0[${PYTHON_USEDEP}] ~dev-python/bleak-retry-connector-1.15.1[${PYTHON_USEDEP}] ~dev-python/bluetooth-adapters-0.4.1[${PYTHON_USEDEP}] ~dev-python/bluetooth-auto-recovery-0.3.3[${PYTHON_USEDEP}] ~dev-python/dbus-fast-1.4.0[${PYTHON_USEDEP}] )
 	bluetooth_le_tracker? ( ~dev-python/pygatt-4.0.5[${PYTHON_USEDEP}] )
 	bluetooth_tracker? ( ~dev-python/bt-proximity-0.2.1[${PYTHON_USEDEP}] ~dev-python/pybluez-0.22[${PYTHON_USEDEP}] )
 	bme280? ( ~dev-python/i2csense-0.0.4[${PYTHON_USEDEP}] ~dev-python/smbus-cffi-0.5.1[${PYTHON_USEDEP}] ~dev-python/bme280spi-0.2.0[${PYTHON_USEDEP}] )
@@ -269,7 +271,7 @@ RDEPEND="${RDEPEND}
 	devolo_home_control? ( ~dev-python/devolo-home-control-api-0.18.2[${PYTHON_USEDEP}] )
 	devolo_home_network? ( ~dev-python/devolo-plc-api-0.8.0[${PYTHON_USEDEP}] )
 	dexcom? ( ~dev-python/pydexcom-0.2.3[${PYTHON_USEDEP}] )
-	dhcp? ( ~net-analyzer/scapy-2.4.5 ~dev-python/aiodiscover-1.4.11[${PYTHON_USEDEP}] )
+	dhcp? ( ~net-analyzer/scapy-2.4.5 ~dev-python/aiodiscover-1.4.13[${PYTHON_USEDEP}] )
 	dht? ( ~dev-python/adafruit-circuitpython-dht-3.7.0[${PYTHON_USEDEP}] ~dev-python/RPi-GPIO-0.7.1_alpha4[${PYTHON_USEDEP}] )
 	digitalloggers? ( ~dev-python/dlipower-0.7.165[${PYTHON_USEDEP}] )
 	digital_ocean? ( ~dev-python/python-digitalocean-1.13.2[${PYTHON_USEDEP}] )
@@ -406,7 +408,7 @@ RDEPEND="${RDEPEND}
 	google_pubsub? ( ~dev-python/google-cloud-pubsub-2.11.0[${PYTHON_USEDEP}] )
 	google_translate? ( ~dev-python/gTTS-2.2.4[${PYTHON_USEDEP}] )
 	google_travel_time? ( ~dev-python/googlemaps-2.5.1[${PYTHON_USEDEP}] )
-	govee_ble? ( ~dev-python/govee-ble-0.17.2[${PYTHON_USEDEP}] )
+	govee_ble? ( ~dev-python/govee-ble-0.17.3[${PYTHON_USEDEP}] )
 	gpmdp? ( ~dev-python/websocket-client-0.54.0[${PYTHON_USEDEP}] )
 	gpsd? ( ~dev-python/gps3-0.33.3[${PYTHON_USEDEP}] )
 	gree? ( ~dev-python/greeclimate-1.3.0[${PYTHON_USEDEP}] )
@@ -430,7 +432,7 @@ RDEPEND="${RDEPEND}
 	hive? ( ~dev-python/pyhiveapi-0.5.13[${PYTHON_USEDEP}] )
 	hlk_sw16? ( ~dev-python/hlk-sw16-0.0.9[${PYTHON_USEDEP}] )
 	homekit? ( ~dev-python/HAP-python-4.5.0[${PYTHON_USEDEP}] ~dev-python/fnvhash-0.1.0[${PYTHON_USEDEP}] ~dev-python/pyqrcode-1.2.1[${PYTHON_USEDEP}] ~dev-python/base36-0.1.1[${PYTHON_USEDEP}] )
-	homekit_controller? ( ~dev-python/aiohomekit-1.5.6[${PYTHON_USEDEP}] )
+	homekit_controller? ( ~dev-python/aiohomekit-1.5.7[${PYTHON_USEDEP}] )
 	homematic? ( ~dev-python/pyhomematic-0.1.77[${PYTHON_USEDEP}] )
 	homematicip_cloud? ( ~dev-python/homematicip-1.0.7[${PYTHON_USEDEP}] )
 	homewizard? ( ~dev-python/python-homewizard-energy-1.1.0[${PYTHON_USEDEP}] )
@@ -471,7 +473,7 @@ RDEPEND="${RDEPEND}
 	iota? ( ~dev-python/PyOTA-2.0.5[${PYTHON_USEDEP}] )
 	iotawatt? ( ~dev-python/iotawattpy-0.1.0[${PYTHON_USEDEP}] )
 	iperf3? ( ~dev-python/iperf3-0.1.11[${PYTHON_USEDEP}] )
-	ipma? ( ~dev-python/pyipma-3.0.2[${PYTHON_USEDEP}] )
+	ipma? ( ~dev-python/pyipma-3.0.4[${PYTHON_USEDEP}] )
 	ipp? ( ~dev-python/pyipp-0.11.0[${PYTHON_USEDEP}] )
 	iqvia? ( ~dev-python/numpy-1.23.2[${PYTHON_USEDEP}] ~dev-python/pyiqvia-2022.4.0[${PYTHON_USEDEP}] )
 	irish_rail_transport? ( ~dev-python/pyirishrail-0.0.2[${PYTHON_USEDEP}] )
@@ -510,7 +512,7 @@ RDEPEND="${RDEPEND}
 	launch_library? ( ~dev-python/pylaunches-1.3.0[${PYTHON_USEDEP}] )
 	laundrify? ( ~dev-python/laundrify-aio-1.1.2[${PYTHON_USEDEP}] )
 	lcn? ( ~dev-python/pypck-0.7.15[${PYTHON_USEDEP}] )
-	led_ble? ( ~dev-python/led-ble-0.9.1[${PYTHON_USEDEP}] )
+	led_ble? ( ~dev-python/led-ble-0.10.0[${PYTHON_USEDEP}] )
 	lg_netcast? ( ~dev-python/pylgnetcast-0.3.7[${PYTHON_USEDEP}] )
 	lg_soundbar? ( ~dev-python/temescal-0.5[${PYTHON_USEDEP}] )
 	life360? ( ~dev-python/life360-4.1.1[${PYTHON_USEDEP}] )
@@ -844,7 +846,7 @@ RDEPEND="${RDEPEND}
 	surepetcare? ( ~dev-python/surepy-0.7.2[${PYTHON_USEDEP}] )
 	swiss_hydrological_data? ( ~dev-python/swisshydrodata-0.1.0[${PYTHON_USEDEP}] )
 	swiss_public_transport? ( ~dev-python/python-opendata-transport-0.3.0[${PYTHON_USEDEP}] )
-	switchbot? ( ~dev-python/PySwitchbot-0.19.5[${PYTHON_USEDEP}] )
+	switchbot? ( ~dev-python/PySwitchbot-0.19.8[${PYTHON_USEDEP}] )
 	switcher_kis? ( ~dev-python/aioswitcher-2.0.6[${PYTHON_USEDEP}] )
 	switchmate? ( ~dev-python/PySwitchmate-0.5.1[${PYTHON_USEDEP}] )
 	syncthing? ( ~dev-python/aiosyncthing-0.5.1[${PYTHON_USEDEP}] )
@@ -932,7 +934,7 @@ RDEPEND="${RDEPEND}
 	versasense? ( ~dev-python/pyversasense-0.0.6[${PYTHON_USEDEP}] )
 	version? ( ~dev-python/pyhaversion-22.8.0[${PYTHON_USEDEP}] )
 	vesync? ( ~dev-python/pyvesync-2.0.3[${PYTHON_USEDEP}] )
-	vicare? ( ~dev-python/PyViCare-2.16.2[${PYTHON_USEDEP}] )
+	vicare? ( ~dev-python/PyViCare-2.17.0[${PYTHON_USEDEP}] )
 	vilfo? ( ~dev-python/vilfo-api-client-0.3.2[${PYTHON_USEDEP}] )
 	vivotek? ( ~dev-python/libpyvivotek-0.4.0[${PYTHON_USEDEP}] )
 	vizio? ( ~dev-python/pyvizio-0.1.57[${PYTHON_USEDEP}] )
@@ -971,12 +973,12 @@ RDEPEND="${RDEPEND}
 	xbox_live? ( ~dev-python/xboxapi-2.0.1[${PYTHON_USEDEP}] )
 	xeoma? ( ~dev-python/pyxeoma-1.4.1[${PYTHON_USEDEP}] )
 	xiaomi_aqara? ( ~dev-python/PyXiaomiGateway-0.13.4[${PYTHON_USEDEP}] )
-	xiaomi_ble? ( ~dev-python/xiaomi-ble-0.9.0[${PYTHON_USEDEP}] )
+	xiaomi_ble? ( ~dev-python/xiaomi-ble-0.10.0[${PYTHON_USEDEP}] )
 	xiaomi_miio? ( ~dev-python/construct-2.10.56[${PYTHON_USEDEP}] ~dev-python/micloud-0.5[${PYTHON_USEDEP}] ~dev-python/python-miio-0.5.12[${PYTHON_USEDEP}] )
 	xiaomi_tv? ( ~dev-python/pymitv-1.4.3[${PYTHON_USEDEP}] )
 	xmpp? ( ~dev-python/slixmpp-1.8.2[${PYTHON_USEDEP}] )
 	xs1? ( ~dev-python/xs1-api-client-3.0.0[${PYTHON_USEDEP}] )
-	yalexs_ble? ( ~dev-python/yalexs-ble-1.8.1[${PYTHON_USEDEP}] )
+	yalexs_ble? ( ~dev-python/yalexs-ble-1.9.0[${PYTHON_USEDEP}] )
 	yale_smart_alarm? ( ~dev-python/yalesmartalarmclient-0.3.9[${PYTHON_USEDEP}] )
 	yamaha? ( ~dev-python/rxv-0.7.0[${PYTHON_USEDEP}] )
 	yamaha_musiccast? ( ~dev-python/aiomusiccast-0.14.4[${PYTHON_USEDEP}] )
--- a/app-misc/homeassistant-min/Manifest
+++ b/app-misc/homeassistant-min/Manifest
@@ -11,11 +11,11 @@ AUX update-homeassistant 1326 BLAKE2B 917bdd332c4e5dea5177eecd11a7f8d72b911fddfd
 DIST homeassistant-2022.7.7.tar.gz 15751383 BLAKE2B 6e5d38086f08a86b025163c3e66a20ab935dc527529ba5352cf56aaeb23806c904a89db355a0d54648859828f722c2dc747282fb94aaf55889382bb885ad672e SHA512 aa181f39718d970de9ff88c79bf86cb60e95d11eda012553cc6bc1654eed7675d1a89a568a11bd53110be46cad89a647ce74d66e109fac87bfcda5363dbcbd21
 DIST homeassistant-2022.8.6.tar.gz 15994374 BLAKE2B d31afd291bca68ba8b3a090c5fc6b22a2b45679e199754371490e61a776fc07e406068a1c0b0b9d691d2dc421ab078668f40e5e01497d10f365c40e4091a7021 SHA512 cef95a06a229986ab46772b5be971cc8c5040ba81f16cfa4e9bce7d566d193467d969ee2db9d7b7d45056617d281d68f8d6324a1f7d88f2a3583f5c4a1951725
 DIST homeassistant-2022.8.7.tar.gz 15994709 BLAKE2B fc6d5d7ed831c012e99d49516c20afa0a03311131620740436421b0dfab45820cebf113810c2472357f4637040dea9b96c3a2a1c82ebc3136ece015f87b7d8ce SHA512 009cb81106996f8457c08c76a89b61689b8554ed0453715e6ea2ceee6f4bf4822f82ec2dc2aa3bd7793dd0b2462424557cf2d4a09565f6f089654cae6dce39d9
-DIST homeassistant-2022.9.1.tar.gz 16470299 BLAKE2B 981ce873971ad6cc8f06d55608270e6fdd8f9ca2c4da5d8ac4b6a8c215eb73ec90f05256e315a5b4133ae030e8d0ce48627abed1cbacf568a752bc6bf003f9eb SHA512 38b72a5dd75f42eda93835844cac6df45aaecdf3587a4a73d1956caac6c904fb9db734a78419ed19feffb6d2c7af6852c0d3e05214a356b1bd2cf209bed8f125
-DIST homeassistant-2022.9.2.tar.gz 16475751 BLAKE2B c1a0206a943c26c9a3328ba356b84d09c3c7703d0482c2e954e6df4516b1712ac65ea52c6fd18cc85fdd31914f395404021ab5cb8b6e6d4c986c2ce591feca97 SHA512 abafe4080e9917dcfbf6e0b4fa9a3fbe541020943819ef9d90a247c6f955ea9f31a66eb8804a95dd9117ed9869371c7b6c7eea63e72aebcdd8fe289392ca65a7
+DIST homeassistant-2022.9.3.tar.gz 16475639 BLAKE2B d0224cd836a7157cf5160a4a3e20351b08bbcc53e979e09917db4ead9d89ba7e425f59c1ab790d94d9b937d73a08fa7ee7440f295a922a45417b8a1e22746c12 SHA512 583f57d7d2e12cf8cdd7c55773692ff6012a0f991f9eafa6c69de7fd2eff7660e390dd387c6edcb75f0d35b602b6475fd408eef72294dd97e483c20f35aaa60c
+DIST homeassistant-2022.9.4.tar.gz 16475573 BLAKE2B 7b6bad7c5c1f5eb0daaf52bbdf0160f48422c2e9535799c196e9ec2f771a4e7fc4030c2921354e20d34cee5df3910848a0e7a8e42deb201c358d01a07e214485 SHA512 e1f3bc473a04303eaeaad6dfe87b4cb0d935bfeb396e826eca2f4f3775ab5f4caa35c963d5e80ed1fb2baded5a1305aa3f4a1e1f22e4debde5f0058c0c251e6c
 EBUILD homeassistant-min-2022.7.7.ebuild 14684 BLAKE2B 6c5f0550fb01f8777767cb1211a78bafb05386cf90eb2cdbe0a7e425f746c5c1532ab3697a2f5ad0e4dadd72448eed19debe1b5328e9222e2bc47678a44110ac SHA512 c074059c296dae0862261ba4bdbe41eb24e7c39467a2ebfbb32ae6f7bf93cd6b2fd08e161d4c238728ea80ac78a75cb5eeda1a876d7457b21f10b57948e54a33
 EBUILD homeassistant-min-2022.8.6.ebuild 14978 BLAKE2B d2c2f57180988d13da8ac2528d9ab78481fd71c3d1dbdf279971225a8635c55fbacec12c20639ec96a01feb27eaadce3ce06eeb3e99314fe8e96b565dbe819b5 SHA512 336cb159654825e3486b9613d9c9dcdd5004a7ca4d5b13900a47d61a3486cee9f4ab2aad3abfc32d1671bc1a28e92e460cc978f90a4b54551a486168798de38a
 EBUILD homeassistant-min-2022.8.7.ebuild 14978 BLAKE2B eeff3c5505e3f0aed8a14ed9aad9ff1b049e6777dafe3d586a4af42084c8a91adf2b287098bff00156f61f43f4c1fb438f46d31562d704cbe286a0bab21eb6b2 SHA512 00626e462d4d50a1e8e685dc0ccecda744ca0b09b79ba4fdc4ed88a02db41b69a0a7be50bd53031e3c7405b04c573f7dac4f0d5e1a35ce867ccde6a8e59e6d75
-EBUILD homeassistant-min-2022.9.1.ebuild 15292 BLAKE2B 9732110e58e830a1df21c4cd04dbc00140d4d99583e0a66d13ab90cd90118c1e12d1ca4fdba78a79bfb49c5ec690772438d812aab2b17966f6ae76aefd9158cc SHA512 f1a78e7391d70b6c5050585ce84922683609eeb0a1f43d4cd98f2a38aa0fcc09a7bd6cb9bf071da2b3636a8110ec0f9786598da9063cf10a58f3c00438f41fb7
-EBUILD homeassistant-min-2022.9.2.ebuild 15292 BLAKE2B f08ae70a0465a52554024cb0fd672add1f424c6a269d7762ec5c155297080ab5e4943eb39d5e5beeed2b361728b3901e9116c24fa5d93d475f5aa40b8defda99 SHA512 69c9a57175d462e82f967bb16c7bccf766af15f5d77fb4f2d94fc765c1803c73086302e9150326576122dbb70402cf02fd27b7b1015ea78db2acd1b6caba7640
+EBUILD homeassistant-min-2022.9.3.ebuild 15504 BLAKE2B 4e24c70a323120fcc3709923d95a0f8b755aa1c3c9b882eb73cb07665eb8ff7d45a0c658640b6f17aeeb675f757b5634f74a0c65a76a1b470ebb075975553c85 SHA512 abe27511c174c51d0b34a9cc4ebb7be9bf2c9ed3761970bcdada24b77e2ecd22a0712daeaee2a265694cfb88316bd6ed2901e3005ed898d1b3c58c18e4ec13e6
+EBUILD homeassistant-min-2022.9.4.ebuild 15504 BLAKE2B 3d770b452aadb52b30316e370efd4ebb805812c5db554d680f94342a8b06a077512fb447fa2f85f877fe90492907997588b31054944a29078d836185e04762cf SHA512 df2e63a8a58e00bf275f91121c7df0bf514928357bc0253b884ad5165ce32790cf360eb2581f37e4cbf05cd0ba43e829c0c91cf2a3af36176443bd6a4a956c4e
 MISC metadata.xml 8482 BLAKE2B abb26aabb8d1509088ff4800de19a75d421fbd15095909aac1a943c9d00eb802523c1c38e87d21323e5e5322efe32b673126fa35acaae11a99b651142e0697b7 SHA512 40e007e056b86195626a72b619290ef421f5298e6fa489e27056207fbf7d7f9fe129487883c5327a14211ca4c94f5015b10e5e12380141332f1bee3e65516dad
--- a/app-misc/homeassistant-min/homeassistant-min-2022.9.3.ebuild
+++ b/app-misc/homeassistant-min/homeassistant-min-2022.9.3.ebuild
@@ -45,7 +45,7 @@ RDEPEND="${RDEPEND}
 # Home Assistant Core dependencies
 # from package_constraints.txt
 RDEPEND="${RDEPEND}
-	~dev-python/aiodiscover-1.4.11[${PYTHON_USEDEP}]
+	~dev-python/aiodiscover-1.4.13[${PYTHON_USEDEP}]
 	~dev-python/aiohttp-3.8.1[${PYTHON_USEDEP}]
 	~dev-python/aiohttp-cors-0.7.0[${PYTHON_USEDEP}]
 	~dev-python/anyio-3.6.1[${PYTHON_USEDEP}]
@@ -58,20 +58,22 @@ RDEPEND="${RDEPEND}
 	~dev-python/awesomeversion-22.8.0[${PYTHON_USEDEP}]
 	<dev-python/backoff-2.0[${PYTHON_USEDEP}]
 	~dev-python/bcrypt-3.1.7[${PYTHON_USEDEP}]
-	~dev-python/bleak-0.16.0[${PYTHON_USEDEP}]
+	~dev-python/bleak-retry-connector-1.15.1[${PYTHON_USEDEP}]
+	~dev-python/bleak-0.17.0[${PYTHON_USEDEP}]
 	~dev-python/bluetooth-adapters-0.4.1[${PYTHON_USEDEP}]
-	~dev-python/bluetooth-auto-recovery-0.3.2[${PYTHON_USEDEP}]
+	~dev-python/bluetooth-auto-recovery-0.3.3[${PYTHON_USEDEP}]
 	>=dev-python/btlewrap-0.0.10[${PYTHON_USEDEP}]
 	>=dev-python/certifi-2021.5.30[${PYTHON_USEDEP}]
 	~dev-python/ciso8601-2.2.0[${PYTHON_USEDEP}]
 	~dev-python/cryptography-37.0.4[${PYTHON_USEDEP}]
+	~dev-python/dbus-fast-1.4.0[${PYTHON_USEDEP}]
 	~dev-python/fnvhash-0.1.0[${PYTHON_USEDEP}]
 	~dev-python/grpcio-status-1.48.0[${PYTHON_USEDEP}]
 	~dev-python/grpcio-1.48.0[${PYTHON_USEDEP}]
 	~dev-python/h11-0.12.0[${PYTHON_USEDEP}]
 	~dev-python/hass-nabucasa-0.55.0[${PYTHON_USEDEP}]
 	~dev-python/home-assistant-bluetooth-1.3.0[${PYTHON_USEDEP}]
-	~dev-python/home-assistant-frontend-20220907.0[${PYTHON_USEDEP}]
+	~dev-python/home-assistant-frontend-20220907.1[${PYTHON_USEDEP}]
 	~dev-python/httpcore-0.15.0[${PYTHON_USEDEP}]
 	>=dev-python/httplib2-0.19.0[${PYTHON_USEDEP}]
 	~dev-python/httpx-0.23.0[${PYTHON_USEDEP}]
@@ -137,7 +139,7 @@ RDEPEND="${RDEPEND}
 	androidtv? ( ~dev-python/adb-shell-0.4.3[${PYTHON_USEDEP}] ~dev-python/androidtv-0.0.67[${PYTHON_USEDEP}] ~dev-python/pure-python-adb-0.3.0[${PYTHON_USEDEP}] )
 	android_ip_webcam? ( ~dev-python/pydroid-ipcam-2.0.0[${PYTHON_USEDEP}] )
 	axis? ( ~dev-python/axis-44[${PYTHON_USEDEP}] )
-	bluetooth? ( ~dev-python/bleak-0.16.0[${PYTHON_USEDEP}] ~dev-python/bluetooth-adapters-0.4.1[${PYTHON_USEDEP}] ~dev-python/bluetooth-auto-recovery-0.3.2[${PYTHON_USEDEP}] )
+	bluetooth? ( ~dev-python/bleak-0.17.0[${PYTHON_USEDEP}] ~dev-python/bleak-retry-connector-1.15.1[${PYTHON_USEDEP}] ~dev-python/bluetooth-adapters-0.4.1[${PYTHON_USEDEP}] ~dev-python/bluetooth-auto-recovery-0.3.3[${PYTHON_USEDEP}] ~dev-python/dbus-fast-1.4.0[${PYTHON_USEDEP}] )
 	bluetooth_le_tracker? ( ~dev-python/pygatt-4.0.5[${PYTHON_USEDEP}] )
 	caldav? ( ~dev-python/caldav-0.9.1[${PYTHON_USEDEP}] )
 	camera? ( ~dev-python/PyTurboJPEG-1.6.7[${PYTHON_USEDEP}] )
@@ -158,7 +160,7 @@ RDEPEND="${RDEPEND}
 	fronius? ( ~dev-python/PyFronius-0.7.1[${PYTHON_USEDEP}] )
 	github? ( ~dev-python/aiogithubapi-22.2.4[${PYTHON_USEDEP}] )
 	homekit? ( ~dev-python/HAP-python-4.5.0[${PYTHON_USEDEP}] ~dev-python/fnvhash-0.1.0[${PYTHON_USEDEP}] ~dev-python/pyqrcode-1.2.1[${PYTHON_USEDEP}] ~dev-python/base36-0.1.1[${PYTHON_USEDEP}] )
-	homekit_controller? ( ~dev-python/aiohomekit-1.5.6[${PYTHON_USEDEP}] )
+	homekit_controller? ( ~dev-python/aiohomekit-1.5.7[${PYTHON_USEDEP}] )
 	http? ( ~dev-python/aiohttp-cors-0.7.0[${PYTHON_USEDEP}] )
 	hyperion? ( ~dev-python/hyperion-py-0.7.5[${PYTHON_USEDEP}] )
 	influxdb? ( ~dev-python/influxdb-5.3.1[${PYTHON_USEDEP}] ~dev-python/influxdb-client-1.24.0[${PYTHON_USEDEP}] )
--- a/app-misc/homeassistant-min/homeassistant-min-2022.9.4.ebuild
+++ b/app-misc/homeassistant-min/homeassistant-min-2022.9.4.ebuild
@@ -45,7 +45,7 @@ RDEPEND="${RDEPEND}
 # Home Assistant Core dependencies
 # from package_constraints.txt
 RDEPEND="${RDEPEND}
-	~dev-python/aiodiscover-1.4.11[${PYTHON_USEDEP}]
+	~dev-python/aiodiscover-1.4.13[${PYTHON_USEDEP}]
 	~dev-python/aiohttp-3.8.1[${PYTHON_USEDEP}]
 	~dev-python/aiohttp-cors-0.7.0[${PYTHON_USEDEP}]
 	~dev-python/anyio-3.6.1[${PYTHON_USEDEP}]
@@ -58,20 +58,22 @@ RDEPEND="${RDEPEND}
 	~dev-python/awesomeversion-22.8.0[${PYTHON_USEDEP}]
 	<dev-python/backoff-2.0[${PYTHON_USEDEP}]
 	~dev-python/bcrypt-3.1.7[${PYTHON_USEDEP}]
-	~dev-python/bleak-0.16.0[${PYTHON_USEDEP}]
-	~dev-python/bluetooth-adapters-0.3.5[${PYTHON_USEDEP}]
-	~dev-python/bluetooth-auto-recovery-0.3.2[${PYTHON_USEDEP}]
+	~dev-python/bleak-retry-connector-1.15.1[${PYTHON_USEDEP}]
+	~dev-python/bleak-0.17.0[${PYTHON_USEDEP}]
+	~dev-python/bluetooth-adapters-0.4.1[${PYTHON_USEDEP}]
+	~dev-python/bluetooth-auto-recovery-0.3.3[${PYTHON_USEDEP}]
 	>=dev-python/btlewrap-0.0.10[${PYTHON_USEDEP}]
 	>=dev-python/certifi-2021.5.30[${PYTHON_USEDEP}]
 	~dev-python/ciso8601-2.2.0[${PYTHON_USEDEP}]
 	~dev-python/cryptography-37.0.4[${PYTHON_USEDEP}]
+	~dev-python/dbus-fast-1.4.0[${PYTHON_USEDEP}]
 	~dev-python/fnvhash-0.1.0[${PYTHON_USEDEP}]
 	~dev-python/grpcio-status-1.48.0[${PYTHON_USEDEP}]
 	~dev-python/grpcio-1.48.0[${PYTHON_USEDEP}]
 	~dev-python/h11-0.12.0[${PYTHON_USEDEP}]
 	~dev-python/hass-nabucasa-0.55.0[${PYTHON_USEDEP}]
 	~dev-python/home-assistant-bluetooth-1.3.0[${PYTHON_USEDEP}]
-	~dev-python/home-assistant-frontend-20220907.0[${PYTHON_USEDEP}]
+	~dev-python/home-assistant-frontend-20220907.2[${PYTHON_USEDEP}]
 	~dev-python/httpcore-0.15.0[${PYTHON_USEDEP}]
 	>=dev-python/httplib2-0.19.0[${PYTHON_USEDEP}]
 	~dev-python/httpx-0.23.0[${PYTHON_USEDEP}]
@@ -137,7 +139,7 @@ RDEPEND="${RDEPEND}
 	androidtv? ( ~dev-python/adb-shell-0.4.3[${PYTHON_USEDEP}] ~dev-python/androidtv-0.0.67[${PYTHON_USEDEP}] ~dev-python/pure-python-adb-0.3.0[${PYTHON_USEDEP}] )
 	android_ip_webcam? ( ~dev-python/pydroid-ipcam-2.0.0[${PYTHON_USEDEP}] )
 	axis? ( ~dev-python/axis-44[${PYTHON_USEDEP}] )
-	bluetooth? ( ~dev-python/bleak-0.16.0[${PYTHON_USEDEP}] ~dev-python/bluetooth-adapters-0.3.5[${PYTHON_USEDEP}] ~dev-python/bluetooth-auto-recovery-0.3.2[${PYTHON_USEDEP}] )
+	bluetooth? ( ~dev-python/bleak-0.17.0[${PYTHON_USEDEP}] ~dev-python/bleak-retry-connector-1.15.1[${PYTHON_USEDEP}] ~dev-python/bluetooth-adapters-0.4.1[${PYTHON_USEDEP}] ~dev-python/bluetooth-auto-recovery-0.3.3[${PYTHON_USEDEP}] ~dev-python/dbus-fast-1.4.0[${PYTHON_USEDEP}] )
 	bluetooth_le_tracker? ( ~dev-python/pygatt-4.0.5[${PYTHON_USEDEP}] )
 	caldav? ( ~dev-python/caldav-0.9.1[${PYTHON_USEDEP}] )
 	camera? ( ~dev-python/PyTurboJPEG-1.6.7[${PYTHON_USEDEP}] )
@@ -158,7 +160,7 @@ RDEPEND="${RDEPEND}
 	fronius? ( ~dev-python/PyFronius-0.7.1[${PYTHON_USEDEP}] )
 	github? ( ~dev-python/aiogithubapi-22.2.4[${PYTHON_USEDEP}] )
 	homekit? ( ~dev-python/HAP-python-4.5.0[${PYTHON_USEDEP}] ~dev-python/fnvhash-0.1.0[${PYTHON_USEDEP}] ~dev-python/pyqrcode-1.2.1[${PYTHON_USEDEP}] ~dev-python/base36-0.1.1[${PYTHON_USEDEP}] )
-	homekit_controller? ( ~dev-python/aiohomekit-1.5.2[${PYTHON_USEDEP}] )
+	homekit_controller? ( ~dev-python/aiohomekit-1.5.7[${PYTHON_USEDEP}] )
 	http? ( ~dev-python/aiohttp-cors-0.7.0[${PYTHON_USEDEP}] )
 	hyperion? ( ~dev-python/hyperion-py-0.7.5[${PYTHON_USEDEP}] )
 	influxdb? ( ~dev-python/influxdb-5.3.1[${PYTHON_USEDEP}] ~dev-python/influxdb-client-1.24.0[${PYTHON_USEDEP}] )
@@ -217,7 +219,7 @@ RDEPEND="${RDEPEND}
 	yamaha? ( ~dev-python/rxv-0.7.0[${PYTHON_USEDEP}] )
 	yamaha_musiccast? ( ~dev-python/aiomusiccast-0.14.4[${PYTHON_USEDEP}] )
 	zeroconf? ( ~dev-python/zeroconf-0.39.1[${PYTHON_USEDEP}] )
-	zha? ( ~dev-python/bellows-0.33.1[${PYTHON_USEDEP}] ~dev-python/pyserial-3.5[${PYTHON_USEDEP}] ~dev-python/pyserial-asyncio-0.6[${PYTHON_USEDEP}] ~dev-python/zha-quirks-0.0.79[${PYTHON_USEDEP}] ~dev-python/zigpy-deconz-0.18.0[${PYTHON_USEDEP}] ~dev-python/zigpy-0.50.2[${PYTHON_USEDEP}] ~dev-python/zigpy-xbee-0.15.0[${PYTHON_USEDEP}] ~dev-python/zigpy-zigate-0.9.2[${PYTHON_USEDEP}] ~dev-python/zigpy-znp-0.8.2[${PYTHON_USEDEP}] )
+	zha? ( ~dev-python/bellows-0.33.1[${PYTHON_USEDEP}] ~dev-python/pyserial-3.5[${PYTHON_USEDEP}] ~dev-python/pyserial-asyncio-0.6[${PYTHON_USEDEP}] ~dev-python/zha-quirks-0.0.79[${PYTHON_USEDEP}] ~dev-python/zigpy-deconz-0.18.1[${PYTHON_USEDEP}] ~dev-python/zigpy-0.50.3[${PYTHON_USEDEP}] ~dev-python/zigpy-xbee-0.15.0[${PYTHON_USEDEP}] ~dev-python/zigpy-zigate-0.9.2[${PYTHON_USEDEP}] ~dev-python/zigpy-znp-0.8.2[${PYTHON_USEDEP}] )
 	zwave_js? ( ~dev-python/pyserial-3.5[${PYTHON_USEDEP}] ~dev-python/zwave-js-server-python-0.41.1[${PYTHON_USEDEP}] )"

 BDEPEND="${RDEPEND}
--- a/app-misc/homeassistant/Manifest
+++ b/app-misc/homeassistant/Manifest
@@ -11,11 +11,11 @@ AUX update-homeassistant 1326 BLAKE2B 917bdd332c4e5dea5177eecd11a7f8d72b911fddfd
 DIST homeassistant-2022.7.7.tar.gz 15751383 BLAKE2B 6e5d38086f08a86b025163c3e66a20ab935dc527529ba5352cf56aaeb23806c904a89db355a0d54648859828f722c2dc747282fb94aaf55889382bb885ad672e SHA512 aa181f39718d970de9ff88c79bf86cb60e95d11eda012553cc6bc1654eed7675d1a89a568a11bd53110be46cad89a647ce74d66e109fac87bfcda5363dbcbd21
 DIST homeassistant-2022.8.6.tar.gz 15994374 BLAKE2B d31afd291bca68ba8b3a090c5fc6b22a2b45679e199754371490e61a776fc07e406068a1c0b0b9d691d2dc421ab078668f40e5e01497d10f365c40e4091a7021 SHA512 cef95a06a229986ab46772b5be971cc8c5040ba81f16cfa4e9bce7d566d193467d969ee2db9d7b7d45056617d281d68f8d6324a1f7d88f2a3583f5c4a1951725
 DIST homeassistant-2022.8.7.tar.gz 15994709 BLAKE2B fc6d5d7ed831c012e99d49516c20afa0a03311131620740436421b0dfab45820cebf113810c2472357f4637040dea9b96c3a2a1c82ebc3136ece015f87b7d8ce SHA512 009cb81106996f8457c08c76a89b61689b8554ed0453715e6ea2ceee6f4bf4822f82ec2dc2aa3bd7793dd0b2462424557cf2d4a09565f6f089654cae6dce39d9
-DIST homeassistant-2022.9.1.tar.gz 16470299 BLAKE2B 981ce873971ad6cc8f06d55608270e6fdd8f9ca2c4da5d8ac4b6a8c215eb73ec90f05256e315a5b4133ae030e8d0ce48627abed1cbacf568a752bc6bf003f9eb SHA512 38b72a5dd75f42eda93835844cac6df45aaecdf3587a4a73d1956caac6c904fb9db734a78419ed19feffb6d2c7af6852c0d3e05214a356b1bd2cf209bed8f125
-DIST homeassistant-2022.9.2.tar.gz 16475751 BLAKE2B c1a0206a943c26c9a3328ba356b84d09c3c7703d0482c2e954e6df4516b1712ac65ea52c6fd18cc85fdd31914f395404021ab5cb8b6e6d4c986c2ce591feca97 SHA512 abafe4080e9917dcfbf6e0b4fa9a3fbe541020943819ef9d90a247c6f955ea9f31a66eb8804a95dd9117ed9869371c7b6c7eea63e72aebcdd8fe289392ca65a7
+DIST homeassistant-2022.9.3.tar.gz 16475639 BLAKE2B d0224cd836a7157cf5160a4a3e20351b08bbcc53e979e09917db4ead9d89ba7e425f59c1ab790d94d9b937d73a08fa7ee7440f295a922a45417b8a1e22746c12 SHA512 583f57d7d2e12cf8cdd7c55773692ff6012a0f991f9eafa6c69de7fd2eff7660e390dd387c6edcb75f0d35b602b6475fd408eef72294dd97e483c20f35aaa60c
+DIST homeassistant-2022.9.4.tar.gz 16475573 BLAKE2B 7b6bad7c5c1f5eb0daaf52bbdf0160f48422c2e9535799c196e9ec2f771a4e7fc4030c2921354e20d34cee5df3910848a0e7a8e42deb201c358d01a07e214485 SHA512 e1f3bc473a04303eaeaad6dfe87b4cb0d935bfeb396e826eca2f4f3775ab5f4caa35c963d5e80ed1fb2baded5a1305aa3f4a1e1f22e4debde5f0058c0c251e6c
 EBUILD homeassistant-2022.7.7.ebuild 29713 BLAKE2B fecbd1baae8e1c87742145e7c798e510cb3fbb585175c700ddca56bee733f556f93fd03645a80d4f77b10808e6a049a34cb15ee9f30fe168bd171285b7b19d72 SHA512 79c8e55698d537df13d63579800738db6dd418a13f17fdcafb8bc27ba33b87d42c33ce57931e76371cd4b968befc15ee8f50617ce78494899675359bbcb6b7ce
 EBUILD homeassistant-2022.8.6.ebuild 29900 BLAKE2B 187f0eea0b53b2b32dda531d3b4682c1a37b49c1b20682db968b4552aa5c054287c1514d7981fe70f9ddd452d12a2fce0915d6c02bf7634b2d8cd0485fca32a7 SHA512 6a9f48e1d679819275539e85c206045de50f99f7a0828635ef0bca5564a21b022e536d639192845c641cd8e5dc432bf59514b0b3851233a9794e426a7ec4991b
 EBUILD homeassistant-2022.8.7.ebuild 29900 BLAKE2B 8bceca9fbb6e560d174ad5b30a3f340c07b6d0b56136a57767cfb09a60b1d04d88818df40ffdfa173396d46a2356e54d507e9a74bcc4bc2d1a7042dbc10fff94 SHA512 7b576034ebcd672038754299999bb14df957a2150e14f60e9621fba47fa46f34ec9f5cb2744dd925dbcd660bf63339ec51266a5ad044fbef4710bf34d6598bbd
-EBUILD homeassistant-2022.9.1.ebuild 30156 BLAKE2B f17dd150930fc7a877c45a39c3858a09ddee64093c5b8dba9449727f9203a759cf0ce501a375e4d87c2f670aec0da615fb319d481e3556b9e2b6698a1aded288 SHA512 1c8175570060abebf814d1ffb1d02a1f9bb55ea86010615a5694b8c6f57f103c7ab602d2f9ed3b4423f415ab42e5f7333aa83e1ac165444f9bddf226ebcf009f
-EBUILD homeassistant-2022.9.2.ebuild 30156 BLAKE2B 8ee425088c91e704a25f5a00de684b8d12da13f79b39231019e4f977639204e08ba0c8d14c2aac11a05e55a7423fb4f0b5cfcc519b68c7e6f919996504118177 SHA512 5b0f410ef4795a7094f0c9ad8747296631eed67ad33b287b6eb0d96607cb26e547b8ccfe8f698b241cb721e84581d812b7dd40234fa777b69f0fa7fd6a79e267
+EBUILD homeassistant-2022.9.3.ebuild 30368 BLAKE2B 0e82d39ead0ee25d35587b6c3967afc815217cb95def585e20043f5a5be3cced53b43114c60a8289950dbad838f41193f76aa1869c4f216412d75ab21b815d22 SHA512 7e1db74ad5f8e6e165d577b36fccae2c987e72be12e451fb3cc5c80da8902dee7c9674c22c7ccfa892074773f01a058de98982a574ef165933581aebcb313e7e
+EBUILD homeassistant-2022.9.4.ebuild 30368 BLAKE2B 80f20b60aa6ca770c34d6b8eb35ca06446624bf93c563c7ad1afe930cba879f58dacf44dcb687d04792a3c6ff1da3928a28f05ad8f63fe592c1c84baf06f594a SHA512 631cde89549ac783852bc5f29689b334d39f92c08235c16995b550bcca8c649ebdf3ab865a9ce91bcf297ed70fb68f5a7355d42d244dab9daf2a730d2b6e663b
 MISC metadata.xml 26158 BLAKE2B 2b575d1adcda0e6db20962200a828ad0e86de31e45b707b5ef07484e7e64d37f482412e79351f300e7a6cf686e147dbd52696468131735f1fdb187433173cee1 SHA512 9953284a6457d1c8741545054a4b92758c029a37dd11ad9558709aa6f670bf7c8efe41c546b03956dc658159136cf7205131dfbad48c35de37438e565060b5ee
--- a/app-misc/homeassistant/homeassistant-2022.9.3.ebuild
+++ b/app-misc/homeassistant/homeassistant-2022.9.3.ebuild
@@ -45,7 +45,7 @@ RDEPEND="${RDEPEND}
 # Home Assistant Core dependencies
 # from package_constraints.txt
 RDEPEND="${RDEPEND}
-	~dev-python/aiodiscover-1.4.11[${PYTHON_USEDEP}]
+	~dev-python/aiodiscover-1.4.13[${PYTHON_USEDEP}]
 	~dev-python/aiohttp-3.8.1[${PYTHON_USEDEP}]
 	~dev-python/aiohttp-cors-0.7.0[${PYTHON_USEDEP}]
 	~dev-python/anyio-3.6.1[${PYTHON_USEDEP}]
@@ -58,20 +58,22 @@ RDEPEND="${RDEPEND}
 	~dev-python/awesomeversion-22.8.0[${PYTHON_USEDEP}]
 	<dev-python/backoff-2.0[${PYTHON_USEDEP}]
 	~dev-python/bcrypt-3.1.7[${PYTHON_USEDEP}]
-	~dev-python/bleak-0.16.0[${PYTHON_USEDEP}]
+	~dev-python/bleak-retry-connector-1.15.1[${PYTHON_USEDEP}]
+	~dev-python/bleak-0.17.0[${PYTHON_USEDEP}]
 	~dev-python/bluetooth-adapters-0.4.1[${PYTHON_USEDEP}]
-	~dev-python/bluetooth-auto-recovery-0.3.2[${PYTHON_USEDEP}]
+	~dev-python/bluetooth-auto-recovery-0.3.3[${PYTHON_USEDEP}]
 	>=dev-python/btlewrap-0.0.10[${PYTHON_USEDEP}]
 	>=dev-python/certifi-2021.5.30[${PYTHON_USEDEP}]
 	~dev-python/ciso8601-2.2.0[${PYTHON_USEDEP}]
 	~dev-python/cryptography-37.0.4[${PYTHON_USEDEP}]
+	~dev-python/dbus-fast-1.4.0[${PYTHON_USEDEP}]
 	~dev-python/fnvhash-0.1.0[${PYTHON_USEDEP}]
 	~dev-python/grpcio-status-1.48.0[${PYTHON_USEDEP}]
 	~dev-python/grpcio-1.48.0[${PYTHON_USEDEP}]
 	~dev-python/h11-0.12.0[${PYTHON_USEDEP}]
 	~dev-python/hass-nabucasa-0.55.0[${PYTHON_USEDEP}]
 	~dev-python/home-assistant-bluetooth-1.3.0[${PYTHON_USEDEP}]
-	~dev-python/home-assistant-frontend-20220907.0[${PYTHON_USEDEP}]
+	~dev-python/home-assistant-frontend-20220907.1[${PYTHON_USEDEP}]
 	~dev-python/httpcore-0.15.0[${PYTHON_USEDEP}]
 	>=dev-python/httplib2-0.19.0[${PYTHON_USEDEP}]
 	~dev-python/httpx-0.23.0[${PYTHON_USEDEP}]
@@ -176,11 +178,11 @@ RDEPEND="${RDEPEND}
 	bizkaibus? ( ~dev-python/bizkaibus-0.1.1[${PYTHON_USEDEP}] )
 	blackbird? ( ~dev-python/pyblackbird-0.5[${PYTHON_USEDEP}] )
 	blebox? ( ~dev-python/blebox-uniapi-2.0.2[${PYTHON_USEDEP}] )
-	blink? ( ~dev-python/blinkpy-0.19.0[${PYTHON_USEDEP}] )
+	blink? ( ~dev-python/blinkpy-0.19.2[${PYTHON_USEDEP}] )
 	blinksticklight? ( ~dev-python/BlinkStick-1.2.0[${PYTHON_USEDEP}] )
 	blinkt? ( ~dev-python/blinkt-0.1.0[${PYTHON_USEDEP}] )
 	blockchain? ( ~dev-python/python-blockchain-api-0.0.2[${PYTHON_USEDEP}] )
-	bluetooth? ( ~dev-python/bleak-0.16.0[${PYTHON_USEDEP}] ~dev-python/bluetooth-adapters-0.4.1[${PYTHON_USEDEP}] ~dev-python/bluetooth-auto-recovery-0.3.2[${PYTHON_USEDEP}] )
+	bluetooth? ( ~dev-python/bleak-0.17.0[${PYTHON_USEDEP}] ~dev-python/bleak-retry-connector-1.15.1[${PYTHON_USEDEP}] ~dev-python/bluetooth-adapters-0.4.1[${PYTHON_USEDEP}] ~dev-python/bluetooth-auto-recovery-0.3.3[${PYTHON_USEDEP}] ~dev-python/dbus-fast-1.4.0[${PYTHON_USEDEP}] )
 	bluetooth_le_tracker? ( ~dev-python/pygatt-4.0.5[${PYTHON_USEDEP}] )
 	bluetooth_tracker? ( ~dev-python/bt-proximity-0.2.1[${PYTHON_USEDEP}] ~dev-python/pybluez-0.22[${PYTHON_USEDEP}] )
 	bme280? ( ~dev-python/i2csense-0.0.4[${PYTHON_USEDEP}] ~dev-python/smbus-cffi-0.5.1[${PYTHON_USEDEP}] ~dev-python/bme280spi-0.2.0[${PYTHON_USEDEP}] )
@@ -213,7 +215,7 @@ RDEPEND="${RDEPEND}
 	deutsche_bahn? ( ~dev-python/schiene-0.23[${PYTHON_USEDEP}] )
 	devolo_home_control? ( ~dev-python/devolo-home-control-api-0.18.2[${PYTHON_USEDEP}] )
 	dexcom? ( ~dev-python/pydexcom-0.2.3[${PYTHON_USEDEP}] )
-	dhcp? ( ~net-analyzer/scapy-2.4.5 ~dev-python/aiodiscover-1.4.11[${PYTHON_USEDEP}] )
+	dhcp? ( ~net-analyzer/scapy-2.4.5 ~dev-python/aiodiscover-1.4.13[${PYTHON_USEDEP}] )
 	dht? ( ~dev-python/adafruit-circuitpython-dht-3.7.0[${PYTHON_USEDEP}] ~dev-python/RPi-GPIO-0.7.1_alpha4[${PYTHON_USEDEP}] )
 	discogs? ( ~dev-python/discogs-client-2.3.0[${PYTHON_USEDEP}] )
 	discord? ( ~dev-python/nextcord-2.0.0_alpha8[${PYTHON_USEDEP}] )
@@ -261,7 +263,7 @@ RDEPEND="${RDEPEND}
 	heos? ( ~dev-python/pyheos-0.7.2[${PYTHON_USEDEP}] )
 	here_travel_time? ( ~dev-python/herepy-2.0.0[${PYTHON_USEDEP}] )
 	homekit? ( ~dev-python/HAP-python-4.5.0[${PYTHON_USEDEP}] ~dev-python/fnvhash-0.1.0[${PYTHON_USEDEP}] ~dev-python/pyqrcode-1.2.1[${PYTHON_USEDEP}] ~dev-python/base36-0.1.1[${PYTHON_USEDEP}] )
-	homekit_controller? ( ~dev-python/aiohomekit-1.5.6[${PYTHON_USEDEP}] )
+	homekit_controller? ( ~dev-python/aiohomekit-1.5.7[${PYTHON_USEDEP}] )
 	homematic? ( ~dev-python/pyhomematic-0.1.77[${PYTHON_USEDEP}] )
 	homematicip_cloud? ( ~dev-python/homematicip-1.0.7[${PYTHON_USEDEP}] )
 	hp_ilo? ( ~dev-python/python-hpilo-4.3[${PYTHON_USEDEP}] )
@@ -275,7 +277,7 @@ RDEPEND="${RDEPEND}
 	influxdb? ( ~dev-python/influxdb-5.3.1[${PYTHON_USEDEP}] ~dev-python/influxdb-client-1.24.0[${PYTHON_USEDEP}] )
 	insteon? ( ~dev-python/pyinsteon-1.2.0[${PYTHON_USEDEP}] ~dev-python/insteon-frontend-home-assistant-0.2.0[${PYTHON_USEDEP}] )
 	intesishome? ( ~dev-python/pyintesishome-1.8.0[${PYTHON_USEDEP}] )
-	ipma? ( ~dev-python/pyipma-3.0.2[${PYTHON_USEDEP}] )
+	ipma? ( ~dev-python/pyipma-3.0.4[${PYTHON_USEDEP}] )
 	ipp? ( ~dev-python/pyipp-0.11.0[${PYTHON_USEDEP}] )
 	islamic_prayer_times? ( ~dev-python/prayer-times-calculator-0.0.6[${PYTHON_USEDEP}] )
 	jewish_calendar? ( ~dev-python/hdate-0.10.4[${PYTHON_USEDEP}] )
@@ -386,7 +388,7 @@ RDEPEND="${RDEPEND}
 	velux? ( ~dev-python/pyvlx-0.2.20[${PYTHON_USEDEP}] )
 	vera? ( ~dev-python/pyvera-0.3.13[${PYTHON_USEDEP}] )
 	version? ( ~dev-python/pyhaversion-22.8.0[${PYTHON_USEDEP}] )
-	vicare? ( ~dev-python/PyViCare-2.16.2[${PYTHON_USEDEP}] )
+	vicare? ( ~dev-python/PyViCare-2.17.0[${PYTHON_USEDEP}] )
 	vizio? ( ~dev-python/pyvizio-0.1.57[${PYTHON_USEDEP}] )
 	wake_on_lan? ( ~dev-python/wakeonlan-2.1.0[${PYTHON_USEDEP}] )
 	waqi? ( ~dev-python/waqiasync-1.0.0[${PYTHON_USEDEP}] )
--- a/app-misc/homeassistant/homeassistant-2022.9.4.ebuild
+++ b/app-misc/homeassistant/homeassistant-2022.9.4.ebuild
@@ -45,7 +45,7 @@ RDEPEND="${RDEPEND}
 # Home Assistant Core dependencies
 # from package_constraints.txt
 RDEPEND="${RDEPEND}
-	~dev-python/aiodiscover-1.4.11[${PYTHON_USEDEP}]
+	~dev-python/aiodiscover-1.4.13[${PYTHON_USEDEP}]
 	~dev-python/aiohttp-3.8.1[${PYTHON_USEDEP}]
 	~dev-python/aiohttp-cors-0.7.0[${PYTHON_USEDEP}]
 	~dev-python/anyio-3.6.1[${PYTHON_USEDEP}]
@@ -58,20 +58,22 @@ RDEPEND="${RDEPEND}
 	~dev-python/awesomeversion-22.8.0[${PYTHON_USEDEP}]
 	<dev-python/backoff-2.0[${PYTHON_USEDEP}]
 	~dev-python/bcrypt-3.1.7[${PYTHON_USEDEP}]
-	~dev-python/bleak-0.16.0[${PYTHON_USEDEP}]
-	~dev-python/bluetooth-adapters-0.3.5[${PYTHON_USEDEP}]
-	~dev-python/bluetooth-auto-recovery-0.3.2[${PYTHON_USEDEP}]
+	~dev-python/bleak-retry-connector-1.15.1[${PYTHON_USEDEP}]
+	~dev-python/bleak-0.17.0[${PYTHON_USEDEP}]
+	~dev-python/bluetooth-adapters-0.4.1[${PYTHON_USEDEP}]
+	~dev-python/bluetooth-auto-recovery-0.3.3[${PYTHON_USEDEP}]
 	>=dev-python/btlewrap-0.0.10[${PYTHON_USEDEP}]
 	>=dev-python/certifi-2021.5.30[${PYTHON_USEDEP}]
 	~dev-python/ciso8601-2.2.0[${PYTHON_USEDEP}]
 	~dev-python/cryptography-37.0.4[${PYTHON_USEDEP}]
+	~dev-python/dbus-fast-1.4.0[${PYTHON_USEDEP}]
 	~dev-python/fnvhash-0.1.0[${PYTHON_USEDEP}]
 	~dev-python/grpcio-status-1.48.0[${PYTHON_USEDEP}]
 	~dev-python/grpcio-1.48.0[${PYTHON_USEDEP}]
 	~dev-python/h11-0.12.0[${PYTHON_USEDEP}]
 	~dev-python/hass-nabucasa-0.55.0[${PYTHON_USEDEP}]
 	~dev-python/home-assistant-bluetooth-1.3.0[${PYTHON_USEDEP}]
-	~dev-python/home-assistant-frontend-20220907.0[${PYTHON_USEDEP}]
+	~dev-python/home-assistant-frontend-20220907.2[${PYTHON_USEDEP}]
 	~dev-python/httpcore-0.15.0[${PYTHON_USEDEP}]
 	>=dev-python/httplib2-0.19.0[${PYTHON_USEDEP}]
 	~dev-python/httpx-0.23.0[${PYTHON_USEDEP}]
@@ -176,11 +178,11 @@ RDEPEND="${RDEPEND}
 	bizkaibus? ( ~dev-python/bizkaibus-0.1.1[${PYTHON_USEDEP}] )
 	blackbird? ( ~dev-python/pyblackbird-0.5[${PYTHON_USEDEP}] )
 	blebox? ( ~dev-python/blebox-uniapi-2.0.2[${PYTHON_USEDEP}] )
-	blink? ( ~dev-python/blinkpy-0.19.0[${PYTHON_USEDEP}] )
+	blink? ( ~dev-python/blinkpy-0.19.2[${PYTHON_USEDEP}] )
 	blinksticklight? ( ~dev-python/BlinkStick-1.2.0[${PYTHON_USEDEP}] )
 	blinkt? ( ~dev-python/blinkt-0.1.0[${PYTHON_USEDEP}] )
 	blockchain? ( ~dev-python/python-blockchain-api-0.0.2[${PYTHON_USEDEP}] )
-	bluetooth? ( ~dev-python/bleak-0.16.0[${PYTHON_USEDEP}] ~dev-python/bluetooth-adapters-0.3.5[${PYTHON_USEDEP}] ~dev-python/bluetooth-auto-recovery-0.3.2[${PYTHON_USEDEP}] )
+	bluetooth? ( ~dev-python/bleak-0.17.0[${PYTHON_USEDEP}] ~dev-python/bleak-retry-connector-1.15.1[${PYTHON_USEDEP}] ~dev-python/bluetooth-adapters-0.4.1[${PYTHON_USEDEP}] ~dev-python/bluetooth-auto-recovery-0.3.3[${PYTHON_USEDEP}] ~dev-python/dbus-fast-1.4.0[${PYTHON_USEDEP}] )
 	bluetooth_le_tracker? ( ~dev-python/pygatt-4.0.5[${PYTHON_USEDEP}] )
 	bluetooth_tracker? ( ~dev-python/bt-proximity-0.2.1[${PYTHON_USEDEP}] ~dev-python/pybluez-0.22[${PYTHON_USEDEP}] )
 	bme280? ( ~dev-python/i2csense-0.0.4[${PYTHON_USEDEP}] ~dev-python/smbus-cffi-0.5.1[${PYTHON_USEDEP}] ~dev-python/bme280spi-0.2.0[${PYTHON_USEDEP}] )
@@ -213,7 +215,7 @@ RDEPEND="${RDEPEND}
 	deutsche_bahn? ( ~dev-python/schiene-0.23[${PYTHON_USEDEP}] )
 	devolo_home_control? ( ~dev-python/devolo-home-control-api-0.18.2[${PYTHON_USEDEP}] )
 	dexcom? ( ~dev-python/pydexcom-0.2.3[${PYTHON_USEDEP}] )
-	dhcp? ( ~net-analyzer/scapy-2.4.5 ~dev-python/aiodiscover-1.4.11[${PYTHON_USEDEP}] )
+	dhcp? ( ~net-analyzer/scapy-2.4.5 ~dev-python/aiodiscover-1.4.13[${PYTHON_USEDEP}] )
 	dht? ( ~dev-python/adafruit-circuitpython-dht-3.7.0[${PYTHON_USEDEP}] ~dev-python/RPi-GPIO-0.7.1_alpha4[${PYTHON_USEDEP}] )
 	discogs? ( ~dev-python/discogs-client-2.3.0[${PYTHON_USEDEP}] )
 	discord? ( ~dev-python/nextcord-2.0.0_alpha8[${PYTHON_USEDEP}] )
@@ -261,7 +263,7 @@ RDEPEND="${RDEPEND}
 	heos? ( ~dev-python/pyheos-0.7.2[${PYTHON_USEDEP}] )
 	here_travel_time? ( ~dev-python/herepy-2.0.0[${PYTHON_USEDEP}] )
 	homekit? ( ~dev-python/HAP-python-4.5.0[${PYTHON_USEDEP}] ~dev-python/fnvhash-0.1.0[${PYTHON_USEDEP}] ~dev-python/pyqrcode-1.2.1[${PYTHON_USEDEP}] ~dev-python/base36-0.1.1[${PYTHON_USEDEP}] )
-	homekit_controller? ( ~dev-python/aiohomekit-1.5.2[${PYTHON_USEDEP}] )
+	homekit_controller? ( ~dev-python/aiohomekit-1.5.7[${PYTHON_USEDEP}] )
 	homematic? ( ~dev-python/pyhomematic-0.1.77[${PYTHON_USEDEP}] )
 	homematicip_cloud? ( ~dev-python/homematicip-1.0.7[${PYTHON_USEDEP}] )
 	hp_ilo? ( ~dev-python/python-hpilo-4.3[${PYTHON_USEDEP}] )
@@ -275,7 +277,7 @@ RDEPEND="${RDEPEND}
 	influxdb? ( ~dev-python/influxdb-5.3.1[${PYTHON_USEDEP}] ~dev-python/influxdb-client-1.24.0[${PYTHON_USEDEP}] )
 	insteon? ( ~dev-python/pyinsteon-1.2.0[${PYTHON_USEDEP}] ~dev-python/insteon-frontend-home-assistant-0.2.0[${PYTHON_USEDEP}] )
 	intesishome? ( ~dev-python/pyintesishome-1.8.0[${PYTHON_USEDEP}] )
-	ipma? ( ~dev-python/pyipma-3.0.2[${PYTHON_USEDEP}] )
+	ipma? ( ~dev-python/pyipma-3.0.4[${PYTHON_USEDEP}] )
 	ipp? ( ~dev-python/pyipp-0.11.0[${PYTHON_USEDEP}] )
 	islamic_prayer_times? ( ~dev-python/prayer-times-calculator-0.0.6[${PYTHON_USEDEP}] )
 	jewish_calendar? ( ~dev-python/hdate-0.10.4[${PYTHON_USEDEP}] )
@@ -334,7 +336,7 @@ RDEPEND="${RDEPEND}
 	rachio? ( ~dev-python/RachioPy-1.0.3[${PYTHON_USEDEP}] )
 	radio_browser? ( ~dev-python/radios-0.1.1[${PYTHON_USEDEP}] )
 	rainbird? ( ~dev-python/pyrainbird-0.4.3[${PYTHON_USEDEP}] )
-	rainmachine? ( ~dev-python/regenmaschine-2022.9.0[${PYTHON_USEDEP}] )
+	rainmachine? ( ~dev-python/regenmaschine-2022.9.1[${PYTHON_USEDEP}] )
 	recorder? ( ~dev-python/sqlalchemy-1.4.40[${PYTHON_USEDEP}] ~dev-python/fnvhash-0.1.0[${PYTHON_USEDEP}] )
 	rejseplanen? ( ~dev-python/rjpl-0.3.6[${PYTHON_USEDEP}] )
 	rest? ( ~dev-python/jsonpath-0.82[${PYTHON_USEDEP}] ~dev-python/xmltodict-0.13.0[${PYTHON_USEDEP}] )
@@ -386,7 +388,7 @@ RDEPEND="${RDEPEND}
 	velux? ( ~dev-python/pyvlx-0.2.20[${PYTHON_USEDEP}] )
 	vera? ( ~dev-python/pyvera-0.3.13[${PYTHON_USEDEP}] )
 	version? ( ~dev-python/pyhaversion-22.8.0[${PYTHON_USEDEP}] )
-	vicare? ( ~dev-python/PyViCare-2.16.2[${PYTHON_USEDEP}] )
+	vicare? ( ~dev-python/PyViCare-2.17.0[${PYTHON_USEDEP}] )
 	vizio? ( ~dev-python/pyvizio-0.1.57[${PYTHON_USEDEP}] )
 	wake_on_lan? ( ~dev-python/wakeonlan-2.1.0[${PYTHON_USEDEP}] )
 	waqi? ( ~dev-python/waqiasync-1.0.0[${PYTHON_USEDEP}] )
@@ -409,7 +411,7 @@ RDEPEND="${RDEPEND}
 	yi? ( ~dev-python/aioftp-0.12.0[${PYTHON_USEDEP}] )
 	zeroconf? ( ~dev-python/zeroconf-0.39.1[${PYTHON_USEDEP}] )
 	zerproc? ( ~dev-python/pyzerproc-0.4.8[${PYTHON_USEDEP}] )
-	zha? ( ~dev-python/bellows-0.33.1[${PYTHON_USEDEP}] ~dev-python/pyserial-3.5[${PYTHON_USEDEP}] ~dev-python/pyserial-asyncio-0.6[${PYTHON_USEDEP}] ~dev-python/zha-quirks-0.0.79[${PYTHON_USEDEP}] ~dev-python/zigpy-deconz-0.18.0[${PYTHON_USEDEP}] ~dev-python/zigpy-0.50.2[${PYTHON_USEDEP}] ~dev-python/zigpy-xbee-0.15.0[${PYTHON_USEDEP}] ~dev-python/zigpy-zigate-0.9.2[${PYTHON_USEDEP}] ~dev-python/zigpy-znp-0.8.2[${PYTHON_USEDEP}] )
+	zha? ( ~dev-python/bellows-0.33.1[${PYTHON_USEDEP}] ~dev-python/pyserial-3.5[${PYTHON_USEDEP}] ~dev-python/pyserial-asyncio-0.6[${PYTHON_USEDEP}] ~dev-python/zha-quirks-0.0.79[${PYTHON_USEDEP}] ~dev-python/zigpy-deconz-0.18.1[${PYTHON_USEDEP}] ~dev-python/zigpy-0.50.3[${PYTHON_USEDEP}] ~dev-python/zigpy-xbee-0.15.0[${PYTHON_USEDEP}] ~dev-python/zigpy-zigate-0.9.2[${PYTHON_USEDEP}] ~dev-python/zigpy-znp-0.8.2[${PYTHON_USEDEP}] )
 	zhong_hong? ( ~dev-python/zhong-hong-hvac-1.0.9[${PYTHON_USEDEP}] )
 	zoneminder? ( ~dev-python/zm-py-0.5.2[${PYTHON_USEDEP}] )
 	zwave_js? ( ~dev-python/pyserial-3.5[${PYTHON_USEDEP}] ~dev-python/zwave-js-server-python-0.41.1[${PYTHON_USEDEP}] )"
--- a/dev-python/PySwitchbot/Manifest
+++ b/dev-python/PySwitchbot/Manifest
@@ -1,11 +1,11 @@
 DIST PySwitchbot-0.14.1.tar.gz 7325 BLAKE2B 4fb9e22e40b6530f177956d4f25a79231c0c2f75701ce1d7e9b86e2a28129b4f2f21edaa633cc889e49e9f07da7298345b09fef870398974120e7256a903c113 SHA512 26fb62c8d234e596b6a6866900c58dacdaffb7e307c236e0ab3a85919dffa85cc73c8d54d96ed38c8905a55157ffa40386b9e960a0c311896e791147f5bfdc53
 DIST PySwitchbot-0.18.10.tar.gz 11249 BLAKE2B eba6272c34b14edef87a88886a5afba8c9c5bc8a226b87c01661750da191c0162ca4bd21da04f9f07f9e9eca82569655d2acb39e08a02aa4481cc25f4fdf8168 SHA512 dd529f4dc068c12d83277180229e65d44cd01acc3607c7d0473b781ce0f894c9c4a2172b2a5464efabe50530c559e5df4edb35ce348ebb08be9c04a36a1cdf21
 DIST PySwitchbot-0.18.14.tar.gz 11625 BLAKE2B b48f16ab138d781ce0eb9bd261c9fde2bba1107252230b8bc383e7463c9c7b74fad496f4d9d3c2ddc0fb00d65f8a6f25484f79d2e161a8cc510c02df5bb5a8bd SHA512 713f13f16d751d95f7ddabe81af8228f03aed69c69e4690fbd846bbee2527be90905059223ead8c04c891cf69b54ff22897b74e37964f852dc171c4f76169f29
-DIST PySwitchbot-0.18.27.tar.gz 15650 BLAKE2B 207d7284e872da985f51f5ba60a178bff2da345fbecf15cdffe0263624a95e54feb9405505fd8768bea612225ca2211b77cc1f41ca6219de028bd455d34bd192 SHA512 e0cb0918f328943d9212684a4c6417d3a3190eb1f0607b6be501228ed8966e7a8b8e2230125651733903b1abe77e3ed9f5dde0feff5871263fc02ef5cc6fdfdd
 DIST PySwitchbot-0.19.5.tar.gz 15829 BLAKE2B 5534e63e5dcc6b99e6d6a2e3ddffc0307c92ca5116bd2434ffc38d8e4c1410b692f26e67403f5c94cb2e081fab9c58a7add48e72dc4ba03e5456edf1de158955 SHA512 def927aa997eff707aed323dac6bc5fe09f2c332bf7e2af1f715681f765e51713ef5475226ee0ba083d2053496a1f0cc1da702b40ff3a902baded49eeb1d1bac
+DIST PySwitchbot-0.19.8.tar.gz 15822 BLAKE2B 3fc6b1194723423fc9ccf4c553ce5ecf7cf2164158220b59e7dffa696471efde3f6700201b82ebd54006fbd4b408ff6425d5e871912a2eaf829492b92a95dd73 SHA512 941655292c3643f70d31bacf7df95324932019386e9bf17993c18e9394ab4eaa720986bcb67c8c6b8f4df0de686e9644c59cb85c1d60a26882951a59d9b88a72
 EBUILD PySwitchbot-0.14.1.ebuild 767 BLAKE2B 9698b7bbd499019a9cd05aef00ff96440a1dd62cc9e90e4871fb34ce7502a94f1b633dfd7b3b3b1dc8874b10e015967c14f6b6bee0779e5a12dd967f545878c9 SHA512 33c1cd03f6b1b655fdb5b10edd44bef0d9e1c5d99b8710bd4f4d73109fc3ee2fb5684f70c7cde0a77232aad6db803be8cd62608251d1b3712b6fe9cea6dbf871
 EBUILD PySwitchbot-0.18.10.ebuild 879 BLAKE2B 51d909aa7e48f2d26b9bfee9e79089beac5d27dacfafc97cbe1f0d568e7b900529ab551712352449af65e4466a8914f5e60311485b99699528d5b67e6febe5cc SHA512 9bd6dae5e5fd7e1b2bb578d005b38515b499d4b28f52908de72bc48da99509536bbc2025f9e42ff86914b540f4cbc6a6b9f48208c6386f9ffa81aaab6dc5ec32
 EBUILD PySwitchbot-0.18.14.ebuild 880 BLAKE2B dd6fbfab9d0a22c57d127ca9dfb938aac40369c280bddb30133f93293895e090a67bc879e55460e6dc5a1e6f97ab8ff3327958fb63a9a86727e2c10bca976a47 SHA512 66b5f6ca6971bcc409272a37e07dd977c4eafbf97ce737f41d95fd1271fdd9f067a784520849847a66ef30ea8a8ed17481c6569fe89ce7ce3dd6b3c6fbfab28f
-EBUILD PySwitchbot-0.18.27.ebuild 880 BLAKE2B dd6fbfab9d0a22c57d127ca9dfb938aac40369c280bddb30133f93293895e090a67bc879e55460e6dc5a1e6f97ab8ff3327958fb63a9a86727e2c10bca976a47 SHA512 66b5f6ca6971bcc409272a37e07dd977c4eafbf97ce737f41d95fd1271fdd9f067a784520849847a66ef30ea8a8ed17481c6569fe89ce7ce3dd6b3c6fbfab28f
 EBUILD PySwitchbot-0.19.5.ebuild 880 BLAKE2B c15af754eecfe8ad0f94ca20381cd43a38c7c151846065a7495808f6b255b4c0fb44cfb6b46fb668e59c65424ab695a96f82cb117e1df66d3b83bee96e2bc863 SHA512 46d5df7cc00fca0a4a2d69f2096600668e77c224bffb269e64fea3df716b3d92495525b729ad3bc61e7654bf370e9fee7d6babdcdfa0bbc9d3f3fa3689a59487
+EBUILD PySwitchbot-0.19.8.ebuild 889 BLAKE2B 565ccdea23d5d1333b30746ac52bf3e350186dc4fb47eb635890336f06298aeac3c3f4e36a3b4f6df4e9d4e71aab6aeff5d660f8d2a22d29c955f0d06296e75b SHA512 f2b73429c7dbdd805b92ba593df30f30276a4a64a2966dd9b62a314a3dbfd78e9ffba04b75ad43199355441dc3b4c2239fa8e5a018684c6e7756ab2653c05f24
 MISC metadata.xml 330 BLAKE2B 513f48da73e61f211a2398788c1ae2fa6a5f11b75bbe22b6e01eecb74623ead9e67076a57515be99a3178af24f41a51866b8e81c03d719cdff8ff3566ac471ac SHA512 9a8ed7d0c9e9092fa6af0ee042fb27e45b552e2256f0a95f94f31b79ae597cae02efb38ff66e64c2e296494ba8baedee9f700190ebcdd0de5d27d197cad7311f
--- a/dev-python/PySwitchbot/PySwitchbot-0.18.27.ebuild
+++ b/dev-python/PySwitchbot/PySwitchbot-0.18.27.ebuild
@@ -19,9 +19,9 @@ RESTRICT="!test? ( test )"

 DOCS="README.md"

-RDEPEND="dev-python/bleak[${PYTHON_USEDEP}]
+RDEPEND=">=dev-python/bleak-0.17.0[${PYTHON_USEDEP}]
 	>=dev-python/async-timeout-4.0.1[${PYTHON_USEDEP}]
-	>=dev-python/bleak-retry-connector-1.11.0[${PYTHON_USEDEP}]"
+	>=dev-python/bleak-retry-connector-1.15.0[${PYTHON_USEDEP}]"
 BDEPEND="
 	dev-python/setuptools[${PYTHON_USEDEP}]
 	test? (
--- a/dev-python/PyViCare/Manifest
+++ b/dev-python/PyViCare/Manifest
@@ -1,7 +1,7 @@
-DIST PyViCare-2.16.1.tar.gz 24313 BLAKE2B 6c4d9e62ba5b8086478b8343c7dd287a16a9d649f33887908365a909e96cd308b1e28e4fa1c0b85582fed756327100294bf098c215da73321ff254cfcbd8d9a0 SHA512 bb5321d7d28e670f011916f53382d48f668a24386c30543204eaa1f0268215779e72807b51be6cbe6d879387b74c0bf61bcefae5a067e5705c4f9ea4ec08bd84
 DIST PyViCare-2.16.2.tar.gz 24394 BLAKE2B 2b17f72dfe32bccbd857826b164fb762fac5ca029f24a2500744049745eece7037f76c07012510fe967f09d8c682aeff157cd477034c834790ac872057742333 SHA512 a0640bb027c654370c7d31c8673f1300e005b96b439fcf5854f27961993204e5c612c1e7491559a7055e397ddcdd720436d9ea886be981023010b2e38262ae7a
 DIST PyViCare-2.16.4.tar.gz 24430 BLAKE2B 8702b6c7c650b0fcf1f886ea5be0487976b6ba7d628612054a07de95ff6e36f454d261be6ef37475f66ad8fefad5f1237ce3596b2811299bab7a3f8e1319681b SHA512 747cd44a1fa611dcf50183e509d265363131d84f60ce332a9489a7d07b61025023096735c5b2338e3663bc5472e2b0b4104a6be48686574ce345f4565fad7060
-EBUILD PyViCare-2.16.1.ebuild 887 BLAKE2B 2b78faaff6e414220d34f95e9dfcdbb98f727e000f25f5f5fdfc5856a61b0cd8254c643b0df4ef1538500835f0822b15fb0b280738b2cc56c44301fc3e68270c SHA512 1b757d0bcbc09692d6b8f8f3df0be83d19a39db4c4a840b2c5c0cf49c4de87a6711d5a6ba2f97b7ec6d4f2c7c4f4e7a8d58653ebd9930d4e16e53c7f3248d5d2
-EBUILD PyViCare-2.16.2.ebuild 925 BLAKE2B b98c06bda168bc4f2f6a8fb22b09c2c441cbb8620470e22ecc542f6b64d11c80586e0c78cc1b4acf4bd02f726ba2f520eacc491d2aab9bad565778ba4d73338e SHA512 e61de1e52d903abcaeb9cc48afc4e61b09673c9b3aaf7f6fe378d50636eb8c878d8b990905bfa4a57826e62c021b3cfb6dc3bb4760c3628ee03115f45127dede
-EBUILD PyViCare-2.16.4.ebuild 925 BLAKE2B b98c06bda168bc4f2f6a8fb22b09c2c441cbb8620470e22ecc542f6b64d11c80586e0c78cc1b4acf4bd02f726ba2f520eacc491d2aab9bad565778ba4d73338e SHA512 e61de1e52d903abcaeb9cc48afc4e61b09673c9b3aaf7f6fe378d50636eb8c878d8b990905bfa4a57826e62c021b3cfb6dc3bb4760c3628ee03115f45127dede
+DIST PyViCare-2.17.0.tar.gz 24451 BLAKE2B 9346847e7ff4c8c281903e675ee8c39b6388816f5e372040ecf1b83acf2574f8ad6b7a661ac50644c4c820330da87ff8e0e7e220d45135465b7b0c145a61828a SHA512 03bcef468afac1eb1b897f59bb767a8b8b89382908628d59711785e8e81aedde270d5dfd256761f657f85e2a3419ed3cf0134850ba1b930fd32e3d0bf3e1d70b
+EBUILD PyViCare-2.16.2.ebuild 925 BLAKE2B 79ca2c6ce2d8f1303f09bb57b94237d06bc00dd1b4d2615d0efcfea7386e70afea73a3eb82558bcb75d3345ee25337429356f378da43d259e0a103a143ed4d78 SHA512 573b928cea21d5138d74d2dfa4349891b929fb71d86dddeda9ccc64895649e2522b41919ef8194be9e7e8dbaaff2476cb7e09b41f6eec9d788e2ffc1e43abff7
+EBUILD PyViCare-2.16.4.ebuild 925 BLAKE2B 79ca2c6ce2d8f1303f09bb57b94237d06bc00dd1b4d2615d0efcfea7386e70afea73a3eb82558bcb75d3345ee25337429356f378da43d259e0a103a143ed4d78 SHA512 573b928cea21d5138d74d2dfa4349891b929fb71d86dddeda9ccc64895649e2522b41919ef8194be9e7e8dbaaff2476cb7e09b41f6eec9d788e2ffc1e43abff7
+EBUILD PyViCare-2.17.0.ebuild 925 BLAKE2B 79ca2c6ce2d8f1303f09bb57b94237d06bc00dd1b4d2615d0efcfea7386e70afea73a3eb82558bcb75d3345ee25337429356f378da43d259e0a103a143ed4d78 SHA512 573b928cea21d5138d74d2dfa4349891b929fb71d86dddeda9ccc64895649e2522b41919ef8194be9e7e8dbaaff2476cb7e09b41f6eec9d788e2ffc1e43abff7
 MISC metadata.xml 459 BLAKE2B f4ad5b2d86e598398850e89524f5b2a536c08972d3226f8db225145dde7cb82b802ca5fb80c75e9766a342712e6f1c3010383e16627f83a26305a56b406563e4 SHA512 5d25d5aa24cb2a8e6bfd840c80b70823687dec39181220f5fe53b74822b98434d0c0b6f7cec8b1ef15ad229aa291bde5a31c10591c4107da052fbea98da6823c
--- a/dev-python/PyViCare/PyViCare-2.16.2.ebuild
+++ b/dev-python/PyViCare/PyViCare-2.16.2.ebuild
@@ -3,7 +3,7 @@

 EAPI=8

-PYTHON_COMPAT=( python3_{8..10} )
+PYTHON_COMPAT=( python3_{8..11} )

 inherit distutils-r1

--- a/dev-python/PyViCare/PyViCare-2.16.4.ebuild
+++ b/dev-python/PyViCare/PyViCare-2.16.4.ebuild
@@ -3,7 +3,7 @@

 EAPI=8

-PYTHON_COMPAT=( python3_{8..10} )
+PYTHON_COMPAT=( python3_{8..11} )

 inherit distutils-r1

--- a/dev-python/PyViCare/PyViCare-2.17.0.ebuild
+++ b/dev-python/PyViCare/PyViCare-2.17.0.ebuild
@@ -3,7 +3,7 @@

 EAPI=8

-PYTHON_COMPAT=( python3_{8..10} )
+PYTHON_COMPAT=( python3_{8..11} )

 inherit distutils-r1

@@ -32,7 +32,10 @@ python_test() {
 	nosetests --verbose || die
 	py.test -v -v || die
 }
+
 src_prepare() {
-	sed -i "s/setuptools-git-versioning//g" -i setup.py || die
+	sed -i "s/setuptools-git-versioning<1.8.0//g" -i setup.py || die
 	eapply_user
 }
+
+distutils_enable_tests pytest
--- a/dev-python/aiodiscover/Manifest
+++ b/dev-python/aiodiscover/Manifest
@@ -1,7 +1,5 @@
 DIST aiodiscover-1.4.11.tar.gz 13761 BLAKE2B ed59372d5c942feffe0d4090b757f5a068705cb4ef79d499b1f7e3de094f7945dca2a9e87b78b35fd511cf2d4dedebe5e264660918260379f78963aa450ef314 SHA512 56cdc08868a484f5a0f816b21eba5e1b62764d4da47c0f1264bbf1a1d2a5f761c6b2e8279453d58a3ff38bbf6743f38403decede00cb178e552b1a50d5f2b7b8
-DIST aiodiscover-1.4.8.tar.gz 13151 BLAKE2B 109a2e58782175d4c059a8e1b711b4ce85a0ea4d9274985f032eb442e89818fc5ce7747e6626bd1a76c28732bec3dec9c048295e2eb0abdb238fffe267fb410d SHA512 3e77213ffc32d46433d6e818b2e97dad37d3360dd91431bdcefa78c8f9e84446f045d9dc231bb4ae01ffde19b8dc31f37e579c6b349451c18f7d1937fc6935ca
-DIST aiodiscover-1.4.9.tar.gz 13744 BLAKE2B ff80115db0a7dce16e2c3133d5a663cc40aaa8e93b0262a15b8e7bcdb7fb114a62530ca47368adfdf7457d6c24d92f7ff64fad8145c5bd6a27811ef7abca637c SHA512 18560e6d959e8ccfb93af0fdb2db1d3a56689413d0ce649516cf44a3bc16dcd3437503d4f777162da8d95a196768fd0d3a490c9348f00e33b0e1669965c7826b
-EBUILD aiodiscover-1.4.11.ebuild 1032 BLAKE2B b7f178b98492802df75579b944165e98bc60838f69bdc7f7740f0324ab6412f4c5e0e8bd56ef4d182021d929721ae48df531265b271e6fe6c274e00414d56e78 SHA512 68ce5ed971a86fca4eff80601d15bb0a21fa9d1343f978714d90e849482d3dba653adfae478194e2830148b7a05539ec80bb299463333395a637e97c784fe5bf
-EBUILD aiodiscover-1.4.8.ebuild 1033 BLAKE2B e817fd8037037e7d99c1cb75863b140f53e3485d92df9b4f57dfde8f81b31631131058fd2ffd3f093ce88ae6515a2b5c8f9ff8dbf83efbc3231afbd7419c631c SHA512 72a0e1e3d308cf41ed525e8f78b6f173359052195586e5881fd1175d36d210bc247f6e14097787128479bbcf3009f8f883ececb7153b9b92ac72042795de92e1
-EBUILD aiodiscover-1.4.9.ebuild 1033 BLAKE2B e817fd8037037e7d99c1cb75863b140f53e3485d92df9b4f57dfde8f81b31631131058fd2ffd3f093ce88ae6515a2b5c8f9ff8dbf83efbc3231afbd7419c631c SHA512 72a0e1e3d308cf41ed525e8f78b6f173359052195586e5881fd1175d36d210bc247f6e14097787128479bbcf3009f8f883ececb7153b9b92ac72042795de92e1
+DIST aiodiscover-1.4.13.tar.gz 13745 BLAKE2B c360af3b298ea4295caec97bd48b1ac071d288bb56cb85a6562b59bae190ab6cbcb872fb53e8a876f57942cad812f5223429cc12f21b26d8cfda1ffc2c985261 SHA512 bc1e6e41efd1955acc61b237844c263313a842da124bb2dae861692e6844a0d533bf716fdf2fef0e1e5cf32a3508fa80075b3a10310d950caa7e8932cc3a53e0
+EBUILD aiodiscover-1.4.11.ebuild 1008 BLAKE2B 148e6b1d43be865ae3feaac468efe6bd48c5cbd837ea0f5287530a0558d3b847e413461e8b74c7a1b9c098e07582bdfe6acb750d8f7fdeeb98d5e0f6f4655454 SHA512 12bcd6c07cf9c7e5e477ca5c962d2d3a6b9bdde0ad1445df3179b6ae12fabb9be76fb0baa3c7d2d2bc0eaca0da7c5c0a5241ffec90bc9e8553074de54a7f5a18
+EBUILD aiodiscover-1.4.13.ebuild 1091 BLAKE2B 60ae46858414553c047cd4ee861e1c0ec3a0b690c4ededc5f5ac6e3ad363419f066247e1f862cbc0488be8f0b5cc9043c25fbb91a0bb8ae4778e42dc26265b6b SHA512 1dce9f84ca920b40c4a4b9711264b51430aa480c6eff3d7820ff825f4fcbb892631559353d45650de8ccea9e5f737d07a08c2f24f3f77e41f90b00b0707613b2
 MISC metadata.xml 453 BLAKE2B 4a2341229992a87bb2f8c72ff39d80be96bc109fa5f6a42350be63e904127c69bf5c60f50dacdde4cffc301116011280914c0169bbcf1619d365617761810c03 SHA512 bbe15e8c45cdafd731c9d2957c0816237b4eb08e186fa15e614109cadebc6bd036f851ddf809933ebaa4b15fb49c4009672a434b7b28fe386490a55bb3142b02
--- a/dev-python/aiodiscover/aiodiscover-1.4.11.ebuild
+++ b/dev-python/aiodiscover/aiodiscover-1.4.11.ebuild
@@ -3,7 +3,7 @@

 EAPI=8

-PYTHON_COMPAT=( python3_{8..10} )
+PYTHON_COMPAT=( python3_{8..11} )

 inherit distutils-r1

@@ -13,7 +13,7 @@ SRC_URI="mirror://pypi/${P:0:1}/${PN}/${P}.tar.gz"

 LICENSE="Apache-2.0"
 SLOT="0"
-KEYWORDS="amd64 arm arm64 x86 ~amd64-linux ~x86-linux"
+KEYWORDS="amd64 arm arm64 x86"
 IUSE="test"
 RESTRICT="!test? ( test )"

--- a/dev-python/aiodiscover/aiodiscover-1.4.13.ebuild
+++ b/dev-python/aiodiscover/aiodiscover-1.4.13.ebuild
@@ -3,7 +3,7 @@

 EAPI=8

-PYTHON_COMPAT=( python3_{8..10} )
+PYTHON_COMPAT=( python3_{8..11} )

 inherit distutils-r1

@@ -13,16 +13,17 @@ SRC_URI="mirror://pypi/${P:0:1}/${PN}/${P}.tar.gz"

 LICENSE="Apache-2.0"
 SLOT="0"
-KEYWORDS="amd64 arm arm64 x86 ~amd64-linux ~x86-linux"
+KEYWORDS="amd64 arm arm64 x86"
 IUSE="test"
 RESTRICT="!test? ( test )"

 DOCS="README.md"

-RDEPEND=">=dev-python/netifaces-0.11.0[${PYTHON_USEDEP}]
+RDEPEND=">=dev-python/async-timeout-4.0.1[${PYTHON_USEDEP}]
+	>=dev-python/netifaces-0.11.0[${PYTHON_USEDEP}]
 	>=dev-python/dnspython-2.1.0[${PYTHON_USEDEP}]
 	dev-python/ifaddr[${PYTHON_USEDEP}]
-	>=dev-python/pyroute2-0.5.18[${PYTHON_USEDEP}]"
+	>=dev-python/pyroute2-0.6.9[${PYTHON_USEDEP}]"
 BDEPEND="
 	dev-python/setuptools[${PYTHON_USEDEP}]
 	dev-python/pytest-runner[${PYTHON_USEDEP}]
@@ -37,3 +38,5 @@ python_test() {
 	nosetests --verbose || die
 	py.test -v -v || die
 }
+
+distutils_enable_tests pytest
--- a/dev-python/aiodiscover/aiodiscover-1.4.9.ebuild
+++ b/dev-python/aiodiscover/aiodiscover-1.4.9.ebuild
@@ -1,39 +0,0 @@
-# Copyright 1999-2022 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=8
-
-PYTHON_COMPAT=( python3_{8..10} )
-
-inherit distutils-r1
-
-DESCRIPTION="Discover hosts by arp and ptr lookup"
-HOMEPAGE="https://github.com/bdraco/aiodiscover https://pypi.org/project/aiodiscover/"
-SRC_URI="mirror://pypi/${P:0:1}/${PN}/${P}.tar.gz"
-
-LICENSE="Apache-2.0"
-SLOT="0"
-KEYWORDS="amd64 arm arm64 x86 ~amd64-linux ~x86-linux"
-IUSE="test"
-RESTRICT="!test? ( test )"
-
-DOCS="README.md"
-
-RDEPEND=">=dev-python/netifaces-0.11.0[${PYTHON_USEDEP}]
-	>=dev-python/dnspython-2.1.0[${PYTHON_USEDEP}]
-	dev-python/ifaddr[${PYTHON_USEDEP}]
-	>=dev-python/pyroute2-0.5.18[${PYTHON_USEDEP}]"
-BDEPEND="
-	dev-python/setuptools[${PYTHON_USEDEP}]
-	dev-python/pytest-runner[${PYTHON_USEDEP}]
-	test? (
-		dev-python/nose[${PYTHON_USEDEP}]
-		dev-python/pytest[${PYTHON_USEDEP}]
-		dev-python/pytest-cov[${PYTHON_USEDEP}]
-		dev-python/pytest-asyncio[${PYTHON_USEDEP}]
-	)"
-
-python_test() {
-	nosetests --verbose || die
-	py.test -v -v || die
-}
--- a/dev-python/aiohomekit/Manifest
+++ b/dev-python/aiohomekit/Manifest
@@ -1,9 +1,9 @@
 DIST aiohomekit-0.7.20.tar.gz 72841 BLAKE2B af8ab3bbf09858d578ff88b2603eb7880c3429de12231bb15e9af9a2b55c41d0e45a25d7bd2eb96f8d6970a93aba16c50842c9b531881295bc9da61064cbf122 SHA512 d298def794464c816362af97c14fce408dd1685c14da9e986f5c8234151a5d41256d100b836559e8192715c160d2e1946b8f189c553d30bf73fe56e23b6c26ea
 DIST aiohomekit-1.2.11.tar.gz 104084 BLAKE2B cb43863729d4fe937280f8b8cd9497b70b20bd967a8eb1cf2c577771f2d30828d1651778fd3260cadec84140f91f519d6a7ab5b4996447b7f4a67df6a97dbd6a SHA512 795ca4492a69b7948eeedec399cab198e205a0aa952d0c781b0e22a5b11d37ae3ab8782f3e37b71ce705e8b51a265d51acea4f5ce1831909952478903b017ad7
-DIST aiohomekit-1.5.2.tar.gz 107656 BLAKE2B d6779c084cc357758d8e57aa21dc68f77ec8ee650be2571c50442704213b8ff417c94e3b91ea8c25ef1605c6156b55676bd6d917c9692e8efa74955b1816e2e6 SHA512 93a62bf56de2dbc82fa337e0e8c095bc155c04840dad5c66f229a7ef163311a51050257b2e41a5e099f98919d5c4f0b5f1012ed36875fcade04c0d2bbf50598e
 DIST aiohomekit-1.5.6.tar.gz 107726 BLAKE2B 20573fde9de8ead8ecb48e9ca407a971e48e589a99ce3ead1a6448012ee38d07a28049f802febbae37fc872f35183adf9f877d896de9723b3646a018574870b2 SHA512 cefc7643e6ac5b76ca424bebbf89d10f06c09653e0267dd8abfdf5f11fc587f39ae6fc560948a74b6f22463c50c14d6fafb1758dc01777e560b3a4bacb0b9ed7
+DIST aiohomekit-1.5.7.tar.gz 107378 BLAKE2B b132c08a55783e9911f224caa321b6e9e6de8f420a596a11f789be7c764bd6f02c0e1c33947ac27f0aa9e46fcdf6bd2f2c6bad6d36d1f8f56aeb7e24c314b4eb SHA512 c4228cfc1052c286ddbf92056907d997a26384d7cf925b2371ab7aff41c3c4a0a9f0129ad9d516ce02ceb864206bc40960c724da490485c65b414d10516b3c29
 EBUILD aiohomekit-0.7.20.ebuild 1121 BLAKE2B ca22b6b5b76643f62603d8e6e521e2c70c3f155e62dc0b28190677da63979bb86a0b715ad344283495d343a90c7178519c6d24b9aadd414f40b160cd66e477ba SHA512 3806ff27e507f4efc1bf0c9094391d1d1235cbafd54f4b85cd71b9f84fca21b15b4b03dd1da5ded66a9072101386083c96e8ed9d52705af5d606a0761541d70b
 EBUILD aiohomekit-1.2.11.ebuild 1369 BLAKE2B d2632592710bb58b6d5b92211169c40cff3b8179413b8b2ae677c0389ef63444ca9d91914e7e23f77274a97202cdbe243f26f2057804071a71865f8830c96071 SHA512 fbec02ae5e7c9feac0444f288003f40bfd21293afb4185f422f4de9ee94906acb3e15ef18c6432274d11c037afb3dd4f4cd655bd0baf8752567442bdb2f76db9
-EBUILD aiohomekit-1.5.2.ebuild 1370 BLAKE2B d38e783e7f9af16fc765485918a2201d45ace1648ac8d65fa4afe5d64d6a3f2c6712490229e3a9116b4f56eed8cb4a22e7be9a06f5c56d1129a8c037e1156eb8 SHA512 b582a6aa83370cccb3d7f6bcd109f88dc06bb6570c8592c7103e6d5c30d9a87ded134245da2f90f8197a9912209d294129116c3251e6e55a8dc109c7613a0790
 EBUILD aiohomekit-1.5.6.ebuild 1370 BLAKE2B 9ac3915ca743e2c9b7ee119e47cb0759a789f4b78de23f034e935dd86f60edcf2f72771acb0a0998fe8c629c46bfee3decb1f8a37e31f4aa3d1481c130956211 SHA512 377e5ed1e485d007d67b7b7d67dd142a09ebc33f97c01453917a1493a84adc64a164326d368f0abe7d99d51bab67a9fb487d83869d63c7f16e5bd56b6ee5cfe5
+EBUILD aiohomekit-1.5.7.ebuild 1370 BLAKE2B a9b81a6689fabf558696360db5c79b98830878aa55adaba4d39ddf0f6a101410902d404c04f5975836a6426a14d74bb1170ff9afe4b64f76eb13ebf3d7f75a35 SHA512 401f93c6e6b2d7c2391349a631402e392f235b064578e2b66e95e292a58cb07eb38e55f71d1cf7009e6a153ada24740c51b383342171776ec6f92e127063d71e
 MISC metadata.xml 456 BLAKE2B 52666d6659ea0e650a453b4c6568f3754db9133bc0786686a87bc1ab7c12c4e967d6a195cd0de1d55dd4b596464735db810541211b1b78c0a9ab30eede8e5dd4 SHA512 9c043f3a3ee2339020070a1f2011bc0799d5ef7c4a2d082401bb96ef3cc1fc4071db15f251681dd3abd97770e865fc10457035c5717b9d7a5a20da814faa3ac4
--- a/dev-python/aiohomekit/aiohomekit-1.5.7.ebuild
+++ b/dev-python/aiohomekit/aiohomekit-1.5.7.ebuild
@@ -24,9 +24,9 @@ RDEPEND=">=dev-python/cryptography-2.9.2[${PYTHON_USEDEP}]
 	>=dev-python/zeroconf-0.32.0[${PYTHON_USEDEP}]
 	>=dev-python/commentjson-0.9.0[${PYTHON_USEDEP}]
 	>=dev-python/aiocoap-0.4.1[${PYTHON_USEDEP}]
-	>=dev-python/bleak-0.14.2[${PYTHON_USEDEP}]
+	>=dev-python/bleak-0.17.0[${PYTHON_USEDEP}]
 	>=dev-python/chacha20poly1305-reuseable-0.0.4[${PYTHON_USEDEP}]
-	>=dev-python/bleak-retry-connector-1.11.0[${PYTHON_USEDEP}]
+	>=dev-python/bleak-retry-connector-1.15.0[${PYTHON_USEDEP}]
 	>=dev-python/orjson-3.7.8[${PYTHON_USEDEP}]
 	>=dev-python/async-timeout-4.0.2[${PYTHON_USEDEP}]"
 BDEPEND="
--- a/dev-python/bleak-retry-connector/Manifest
+++ b/dev-python/bleak-retry-connector/Manifest
@@ -1,7 +1,9 @@
 DIST bleak-retry-connector-1.11.0.tar.gz 8905 BLAKE2B 88aeba302687651c1034c706a5234aceb32b7015d69944a01f41f1be355f7b00e95a978b1eeccbeddc47778dfe43a06c74fcb7591b96d0ee80482a3f7ed38f89 SHA512 1260dda15dedc040a1363b94fbed166cfc9ee944e095b5506b13cb9102e5816e4ce3e0fd7baecdc94d1e3edf0978920cc2d430ecb4bbaf6054d9ce596b996319
 DIST bleak-retry-connector-1.14.0.tar.gz 11794 BLAKE2B 6160a2d83a69ce6f7cac7467aa4b47893a6348eaedfa03e6e2d21f3ec209d5ca1cda83cf1072ca73be3679a42a3b8663705268c9966c4d278e9daa0f383b3335 SHA512 164a179264eebcc6250f8d259e5ed70b52a2758e970fda6f03aeb37f76fec0ad30574b8ea1b77d91dd42a47bd3bf4907e442853403dcc626a881c1cde99338fc
-DIST bleak-retry-connector-1.8.0.tar.gz 7580 BLAKE2B 3389b44e8cb1124c2247892ce69ed42d0bb407b24b3c9afbec93c05b56cf1747f1826c3a6702311858c899560bdf51ab591aedabc3231868599b439a7945b1c5 SHA512 13de712d6a4a74ef5c6c77562885e652c319b197a38a6d46a648a63a48bc07765e3eacbbf811e159bac754d7d9802ed3fe29b563e93f28bd63519f8d33c9e44d
+DIST bleak-retry-connector-1.15.1.tar.gz 11936 BLAKE2B 7f1ffeb4cf8a1506bbe9f80c2bda585094f179b0c4d585a5ee2063828d58234c11cc8041a6ce35861575ad4d1c9a964805954f2ceaabcb54cd12e4f646f5cb04 SHA512 0d5b992d504af1ccf4f85951dd7dff08cc8dc7f13733826873fbb15aab542c10726fcb9d0a0cac0de680a9f505fafa6c3632f0a44cf263314145880fbe91f818
+DIST bleak-retry-connector-1.16.0.tar.gz 12134 BLAKE2B a294744cccfdb5b81eb108659b6808349c2d2f6efcbe0cc902fcdbb773bf60666df24e250ec53a6db69d1c2c204229f8e8e4e59a1575462754d94c0087558d3c SHA512 9921424581c635e62021dd1cd949ee17b36c84588b0bb0b94b5626503f9fa0142075831caf13d9fd91dc6c171c0ed2f5b8408a7c101e0ba9bf99f00d35149958
 EBUILD bleak-retry-connector-1.11.0.ebuild 971 BLAKE2B 8119c5514f2645d0d790555c3a32f736b7e686bccd258fc8f65f2ddef9fc1b69acd8e03e805ee89a0c433d00e30d8d3adcf2acc09a4c427247835a23736f3c07 SHA512 59d36adfd3ce89624e696235c26a58f0d1532f551f549abdc37550cc457726ec236ac82491c98f3d579fe25faf7b8f9aaa1b46da4eef82a504704a8fdd0ba786
 EBUILD bleak-retry-connector-1.14.0.ebuild 1019 BLAKE2B 0cc8291c5432963944645e965ee42a286fb5802006798de9c466b4a01a63b02e57a50519c3eb3eba3ffd70c11e29c9044cf4a01b2ec5408cdd792d166c8b1f03 SHA512 0e182eb516791c68542120bc9741a73223bff3a6150a48a799b4582e569cf1dd688e6ce7ebff236789ffea7ba165ab042d3f0d44ca77c55a5f4487c0754973f6
-EBUILD bleak-retry-connector-1.8.0.ebuild 971 BLAKE2B 8119c5514f2645d0d790555c3a32f736b7e686bccd258fc8f65f2ddef9fc1b69acd8e03e805ee89a0c433d00e30d8d3adcf2acc09a4c427247835a23736f3c07 SHA512 59d36adfd3ce89624e696235c26a58f0d1532f551f549abdc37550cc457726ec236ac82491c98f3d579fe25faf7b8f9aaa1b46da4eef82a504704a8fdd0ba786
+EBUILD bleak-retry-connector-1.15.1.ebuild 1019 BLAKE2B 0cc8291c5432963944645e965ee42a286fb5802006798de9c466b4a01a63b02e57a50519c3eb3eba3ffd70c11e29c9044cf4a01b2ec5408cdd792d166c8b1f03 SHA512 0e182eb516791c68542120bc9741a73223bff3a6150a48a799b4582e569cf1dd688e6ce7ebff236789ffea7ba165ab042d3f0d44ca77c55a5f4487c0754973f6
+EBUILD bleak-retry-connector-1.16.0.ebuild 1019 BLAKE2B 0cc8291c5432963944645e965ee42a286fb5802006798de9c466b4a01a63b02e57a50519c3eb3eba3ffd70c11e29c9044cf4a01b2ec5408cdd792d166c8b1f03 SHA512 0e182eb516791c68542120bc9741a73223bff3a6150a48a799b4582e569cf1dd688e6ce7ebff236789ffea7ba165ab042d3f0d44ca77c55a5f4487c0754973f6
 MISC metadata.xml 463 BLAKE2B 466053ef118ef63da2a473fb583fa4dfa9b71b9dc008a72328de1d6ef8cb4966145979076bf3b567108c8eb4fc09def68e22e5cdafd880fa41bfb14fda30fb41 SHA512 9c25f447492a41a2c362c20c244c10968733c0d3cb0743aba626b55cf9b933e62dbedcaeb8f06bd181f1de83ac8ec39e06c8576d8403b8776123c9e90ceabad6
--- a/dev-python/bleak-retry-connector/bleak-retry-connector-1.15.1.ebuild
+++ b/dev-python/bleak-retry-connector/bleak-retry-connector-1.15.1.ebuild
@@ -20,7 +20,8 @@ RESTRICT="!test? ( test )"
 DOCS="README.md"

 RDEPEND=">=dev-python/bleak-0.15.1[${PYTHON_USEDEP}]
-	>=dev-python/async-timeout-4.0.1[${PYTHON_USEDEP}]"
+	>=dev-python/async-timeout-4.0.1[${PYTHON_USEDEP}]
+	>=dev-python/dbus-fast-1.4.0[${PYTHON_USEDEP}]"
 BDEPEND="
 	dev-python/setuptools[${PYTHON_USEDEP}]
 	test? (
--- a/dev-python/bleak-retry-connector/bleak-retry-connector-1.16.0.ebuild
+++ b/dev-python/bleak-retry-connector/bleak-retry-connector-1.16.0.ebuild
@@ -0,0 +1,39 @@
+# Copyright 1999-2022 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=8
+
+PYTHON_COMPAT=( python3_{8..11} )
+
+inherit distutils-r1
+
+DESCRIPTION="A connector for Bleak Clients that handles transient connection failures"
+HOMEPAGE="https://github.com/bluetooth-devices/bleak-retry-connector https://pypi.org/project/bleak-retry-connector/"
+SRC_URI="mirror://pypi/${P:0:1}/${PN}/${P}.tar.gz"
+
+LICENSE="MIT"
+SLOT="0"
+KEYWORDS="amd64 arm arm64 x86"
+IUSE="test"
+RESTRICT="!test? ( test )"
+
+DOCS="README.md"
+
+RDEPEND=">=dev-python/bleak-0.15.1[${PYTHON_USEDEP}]
+	>=dev-python/async-timeout-4.0.1[${PYTHON_USEDEP}]
+	>=dev-python/dbus-fast-1.4.0[${PYTHON_USEDEP}]"
+BDEPEND="
+	dev-python/setuptools[${PYTHON_USEDEP}]
+	test? (
+		dev-python/nose[${PYTHON_USEDEP}]
+		dev-python/pytest[${PYTHON_USEDEP}]
+		dev-python/pytest-asyncio[${PYTHON_USEDEP}]
+		dev-python/pytest-cov[${PYTHON_USEDEP}]
+	)"
+
+python_test() {
+	nosetests --verbose || die
+	py.test -v -v || die
+}
+
+distutils_enable_tests pytest
--- a/dev-python/bleak/Manifest
+++ b/dev-python/bleak/Manifest
@@ -1,5 +1,7 @@
 DIST bleak-0.15.1.tar.gz 619282 BLAKE2B 8699f5e44cf4e65f0c236d4f728480ef45db8f63e01a8eb9c7a56932c37e0001038bcba41c6670c4780073e227c1de2eece72130deea67fcc18db7db9285c9ea SHA512 d8d22ec7fe22d8577d290d05c1473a2c88ef75880d231895fd26f549860994574c036cdf3267804198431fbe9c528db2e8f1085205f1a07c651e4613305b23f3
 DIST bleak-0.16.0.tar.gz 620711 BLAKE2B f37aafb58857400f452e07a6ae7c0ed2df5e68c9ee1d841ce733b2248d683ee14770c1e557b7a8f002c085a2a7f3a81332fb7e530aaf61673b2e1032ca2e5524 SHA512 7ef580fe7030142508bc9b79a5301365630ec39ddebfa3ec8d786c1977cae643d96fc30e1f09c988d89c553f6023fed158a695946274321212de36126cd1e7da
+DIST bleak-0.17.0.tar.gz 107410 BLAKE2B 05b9700ce1aaaf34940a76829d35c7defb6bd4a6308466f25d982a688e60563604743f402ad2940c648c1c0cc5f13fccf06da366f19d404167589d6af9afdce9 SHA512 1c05ac5d328b32a7cab7d4c8e111547f34d9992c0595a24bfb4a1b7675e0cb970d6461ff26914b92b2f920fc27be043aa5df211ec0aa4392fb1cce2ade5384ac
 EBUILD bleak-0.15.1.ebuild 833 BLAKE2B ccff0a48a339dfafa1f73e93d1be142d8a64b347fc3bd506fc905a25862efc5192400d79518b77ac3292f662171e8ca4377c4666bf0d7dcd731cda48bd2a8950 SHA512 00c845206a43caa9b6c2e807191a51183212d6ee7722c72c6b65d6360c8fc343d4edcf2c1d710fb2c22cedf1736211ae67f3e5f3bfbda45de012e689fa976388
 EBUILD bleak-0.16.0.ebuild 864 BLAKE2B dbfb38b7b6a72a5ee30d89fb2be14997d894d2f73e8e1f637e16062142b99ccee5fa4c8b8560019772865c2d8750e304473cd023c2e2742e3c199a7c2431ad7c SHA512 7b306ba3cd5ac0e23c15cea0f1b19aa2a56f294d5c9969f595dff1cfd638a7a8de33c3305350e85046f47aa4dcc09999c23bd6852a735db5bbb7981a7a2df34d
+EBUILD bleak-0.17.0.ebuild 872 BLAKE2B c1a0f60a8e7bf5b5578dfca0b9c2129d3e93acb9f400f6420bdc793af5d9729313e3e0e37580429b979b99a414929241316739a0c68842f101b3c43dec57ba82 SHA512 9910ac95e395e46eec4a290269fd70508fa0392c5d42fc15c0f837389c40dda21fc37618f9f86a25fa59c0b4d9b2503b839a353a1d675e77f61a716e5e7ae58d
 MISC metadata.xml 456 BLAKE2B 50cba788c6c1e54b660624d6a766c1a6473abaf739c20d05a52b3d0b479972cd00dcc47a370b42540f69e743a3e70f6c15238eda5331c0e3b4e4339180c78996 SHA512 8598b7570c0c9105db12e5fa5874c921f02ff35c1aa1718881bdc6b2af4ac72cb7e6175956d5b1f8b1f4b075f213387edd489885b2013951b7fa2a793f5e15ff
--- a/dev-python/bleak/bleak-0.17.0.ebuild
+++ b/dev-python/bleak/bleak-0.17.0.ebuild
@@ -0,0 +1,37 @@
+# Copyright 1999-2022 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=8
+
+PYTHON_COMPAT=( python3_{8..11} )
+
+inherit distutils-r1
+
+DESCRIPTION="Bluetooth Low Energy platform Agnostic Klient"
+HOMEPAGE="https://github.com/hbldh/bleak https://pypi.org/project/bleak/"
+SRC_URI="mirror://pypi/${P:0:1}/${PN}/${P}.tar.gz"
+
+LICENSE="MIT"
+SLOT="0"
+KEYWORDS="amd64 arm arm64 x86"
+IUSE="test"
+RESTRICT="!test? ( test )"
+
+DOCS="README.rst"
+
+RDEPEND=">=dev-python/async-timeout-4.0.1[${PYTHON_USEDEP}]
+	>=dev-python/typing-extensions-4.2.0[${PYTHON_USEDEP}]
+	>=dev-python/dbus-fast-1.4.0[${PYTHON_USEDEP}]"
+BDEPEND="
+	dev-python/setuptools[${PYTHON_USEDEP}]
+	test? (
+		dev-python/nose[${PYTHON_USEDEP}]
+		dev-python/pytest[${PYTHON_USEDEP}]
+	)"
+
+python_test() {
+	nosetests --verbose || die
+	py.test -v -v || die
+}
+
+distutils_enable_tests pytest
--- a/dev-python/blinkpy/Manifest
+++ b/dev-python/blinkpy/Manifest
@@ -1,5 +1,5 @@
-DIST blinkpy-0.18.0.tar.gz 46622 BLAKE2B 7adb0c8539eca24b2e57d16a3b63d8056d8e59346cc53f68fdb2e584b504ad364a497ee53f08a79f03a21f02e4a78ef7b4142458c201a5e4fea3a635d8db4805 SHA512 2a5396853fab461e25cc091601626e9caa72bd53b779e89df49627259ad46424d1efebd5fc3bd52ac395c0912820e91043c4491047bdf7eac25060ab5e2fbbc7
-DIST blinkpy-0.19.0.tar.gz 47604 BLAKE2B 121cd4779b24a39678aed78a6895dccd20d9d5d6cb475c2e08e3fc3261e2f13c2caadbee9905d82f40393fd7ac594005a8b4df9acd05d5f2c9662f63cd2e25da SHA512 67c08edc7cca3bfb3d940f08fdba87e4088bdc5ce0fa9611b34a92de2df62bc1f862812ca446b69de300d4fe2556db0989a46dd1a4c1893a21a6d70d763a6051
-EBUILD blinkpy-0.18.0.ebuild 960 BLAKE2B efa9300782f2fb7108bf326127c881a80a1e722ea5d453e00ce4d6228582d85d6918028ec7386bf96964956f035de91ca71a529d2f072e2b93db50b6093bff1b SHA512 d20c981f3265fbe9ae8c1576948a31c2971158e78d6d87ec9936f1725b2e151513953044318b99c8e140d3fbd9096487a915e5c4eb738a329c31bcf1bcc6a72d
-EBUILD blinkpy-0.19.0.ebuild 960 BLAKE2B efa9300782f2fb7108bf326127c881a80a1e722ea5d453e00ce4d6228582d85d6918028ec7386bf96964956f035de91ca71a529d2f072e2b93db50b6093bff1b SHA512 d20c981f3265fbe9ae8c1576948a31c2971158e78d6d87ec9936f1725b2e151513953044318b99c8e140d3fbd9096487a915e5c4eb738a329c31bcf1bcc6a72d
+DIST blinkpy-0.19.0.gh.tar.gz 47604 BLAKE2B 121cd4779b24a39678aed78a6895dccd20d9d5d6cb475c2e08e3fc3261e2f13c2caadbee9905d82f40393fd7ac594005a8b4df9acd05d5f2c9662f63cd2e25da SHA512 67c08edc7cca3bfb3d940f08fdba87e4088bdc5ce0fa9611b34a92de2df62bc1f862812ca446b69de300d4fe2556db0989a46dd1a4c1893a21a6d70d763a6051
+DIST blinkpy-0.19.2.gh.tar.gz 48225 BLAKE2B 11233ca5e668ea24c997bae270631732d821dd4c7d6f89b85698fd41a4dc1f602adf1bd670f80294d2ab83e1035e54b2ac60bc2dd1bf6fca2379d64720db9729 SHA512 0abbb2406d52dd441c74cdd009d5b985b4cf61c642cfee454dccd7e2f898d4c6fd9a815e9a2e8a4395582bd2edebf56edc2ce128ffb5f1a7458c1bcf95275fbb
+EBUILD blinkpy-0.19.0.ebuild 939 BLAKE2B 77af75dc78cb3cabf10fdfdf0d6ee078390cdd9fa2d3c14aacb2b3dce78e0090190920004fa546c294a3808599babde47cde715bed7bae32704c60aebc6ffb8f SHA512 e6d7ea2977760730b9b1a9a91e83ed1463fe812f07e26259810158797ef908227cc7b00a0ea7cc9d79bed5b06ed14fdeaaf396719ae6555eaba5e3edbcb1d598
+EBUILD blinkpy-0.19.2.ebuild 939 BLAKE2B 77af75dc78cb3cabf10fdfdf0d6ee078390cdd9fa2d3c14aacb2b3dce78e0090190920004fa546c294a3808599babde47cde715bed7bae32704c60aebc6ffb8f SHA512 e6d7ea2977760730b9b1a9a91e83ed1463fe812f07e26259810158797ef908227cc7b00a0ea7cc9d79bed5b06ed14fdeaaf396719ae6555eaba5e3edbcb1d598
 MISC metadata.xml 453 BLAKE2B 211fa03477362f2e9143e27b7d16ca4bb2c54ab33171ca34b02d94af49a99a661b6f2998038ca26af7b9e656233511217838ebd7db840737b0082939a4963c00 SHA512 34830281a36c75ff42ac75ac01fbbf7ddaeb93cfb4b5c51fd2f3bb0dc5fb26637932520a4e09a9a9c927d408d620f65bfe04454bf633120b2746a1d34a8afcac
--- a/dev-python/blinkpy/blinkpy-0.19.0.ebuild
+++ b/dev-python/blinkpy/blinkpy-0.19.0.ebuild
@@ -3,17 +3,17 @@

 EAPI=8

-PYTHON_COMPAT=( python3_{8..10} )
+PYTHON_COMPAT=( python3_{8..11} )

 inherit distutils-r1

 DESCRIPTION="A Blink camera Python library running on Python 3."
 HOMEPAGE="https://github.com/fronzbot/blinkpy https://pypi.org/project/blinkpy/"
-SRC_URI="https://github.com/fronzbot/blinkpy/archive/v${PV}.tar.gz -> ${P}.tar.gz"
+SRC_URI="https://github.com/fronzbot/blinkpy/archive/v${PV}.tar.gz -> ${P}.gh.tar.gz"

 LICENSE="MIT"
 SLOT="0"
-KEYWORDS="amd64 ~arm ~arm64 x86 amd64-linux x86-linux"
+KEYWORDS="amd64 arm arm64 x86"
 IUSE="test"
 RESTRICT="!test? ( test )"

--- a/dev-python/blinkpy/blinkpy-0.19.2.ebuild
+++ b/dev-python/blinkpy/blinkpy-0.19.2.ebuild
@@ -3,17 +3,17 @@

 EAPI=8

-PYTHON_COMPAT=( python3_{8..10} )
+PYTHON_COMPAT=( python3_{8..11} )

 inherit distutils-r1

 DESCRIPTION="A Blink camera Python library running on Python 3."
 HOMEPAGE="https://github.com/fronzbot/blinkpy https://pypi.org/project/blinkpy/"
-SRC_URI="https://github.com/fronzbot/blinkpy/archive/v${PV}.tar.gz -> ${P}.tar.gz"
+SRC_URI="https://github.com/fronzbot/blinkpy/archive/v${PV}.tar.gz -> ${P}.gh.tar.gz"

 LICENSE="MIT"
 SLOT="0"
-KEYWORDS="amd64 ~arm ~arm64 x86 amd64-linux x86-linux"
+KEYWORDS="amd64 arm arm64 x86"
 IUSE="test"
 RESTRICT="!test? ( test )"

--- a/dev-python/bluetooth-auto-recovery/Manifest
+++ b/dev-python/bluetooth-auto-recovery/Manifest
@@ -1,5 +1,5 @@
-DIST bluetooth-auto-recovery-0.3.1.tar.gz 7042 BLAKE2B 1de79ccb68386e65bfe78573234175965892b0825921b4657a4345c430e45e2db7235165ad86522e9bbf5c6a40c5648d2f652ce66faa690f195401f97a334a3e SHA512 797f7b96dcc7861ed9ce791c8a9498a4ff518a385d910718c41d1fd14e7fc85ebbb3b6da1201649e03e1f1bcdb6d51c96769bcd9d9d8e1e5cd370a3d333470cc
 DIST bluetooth-auto-recovery-0.3.2.tar.gz 7044 BLAKE2B 10b59e7fb19303f6d3ac1f049ce5c3eeb2d40c4629e78f750e4885b93a4478c1954d3b180a71f218dbe9756cb4aabae5de865e2fa423bf4cbe1cd92817f86483 SHA512 1eccad20284d1e0ad18e34958fe0974b9a381b3fc695288bb0238c6690ebebed4df3d278c04cc31febbdeaed301fd2da290505bb37f739e3f5005b9f880e388c
-EBUILD bluetooth-auto-recovery-0.3.1.ebuild 958 BLAKE2B 39d598e77329ce7a4b9dbf10332066f44d0ec78e4279865e6d872b8053f75ad2e97b8f13fa0fbc8cfe131af32cde455be76a680edb0b66b88eaca717078b93b6 SHA512 7c15c1d45cf4a281cc35bb39c00571fdbf3e6a137483f8c89742b07a6a4b3d7490658698587fc7cb53dbaea1e40fc425d7825bdd23fa5dc510c7f6b51c7f2c03
+DIST bluetooth-auto-recovery-0.3.3.tar.gz 7056 BLAKE2B 7338adb1091a44bd3268764f595eea561bb8ff6fd14e12cc7ee10d4f0a76a6bd9dc43b15dda1a252666a53c69a03473cc2003d811022ca7b5daf0f0439f72d1d SHA512 3ded9aa9126bdd2ff0d7bfdfc32291ec5f8626dfb5522cc4b798092c805effce3f6f1d4ee1dacee537cabab6d14324b95e7118a9270cf38a646a9c7e7e0186e7
 EBUILD bluetooth-auto-recovery-0.3.2.ebuild 958 BLAKE2B 39d598e77329ce7a4b9dbf10332066f44d0ec78e4279865e6d872b8053f75ad2e97b8f13fa0fbc8cfe131af32cde455be76a680edb0b66b88eaca717078b93b6 SHA512 7c15c1d45cf4a281cc35bb39c00571fdbf3e6a137483f8c89742b07a6a4b3d7490658698587fc7cb53dbaea1e40fc425d7825bdd23fa5dc510c7f6b51c7f2c03
+EBUILD bluetooth-auto-recovery-0.3.3.ebuild 958 BLAKE2B 39d598e77329ce7a4b9dbf10332066f44d0ec78e4279865e6d872b8053f75ad2e97b8f13fa0fbc8cfe131af32cde455be76a680edb0b66b88eaca717078b93b6 SHA512 7c15c1d45cf4a281cc35bb39c00571fdbf3e6a137483f8c89742b07a6a4b3d7490658698587fc7cb53dbaea1e40fc425d7825bdd23fa5dc510c7f6b51c7f2c03
 MISC metadata.xml 465 BLAKE2B bc4cded6b70e06e677dcae0012e0806aae4eb531c63442a207aaca5aeeabaeaf377cff601aca0b6637f12cb0763500ac1f7561f33742b9f9aefc8c8b7be279a9 SHA512 a3ae6d9609b09e4b5b328836399e0e9a6448b2462daa2d0541c5a4e8319a88222800b9f6dde9500b446fda8a7074a63239de2065dc420b6262c3c2a8234a224c
--- a/dev-python/bluetooth-auto-recovery/bluetooth-auto-recovery-0.3.3.ebuild
+++ b/dev-python/bluetooth-auto-recovery/bluetooth-auto-recovery-0.3.3.ebuild
--- a/dev-python/govee-ble/Manifest
+++ b/dev-python/govee-ble/Manifest
@@ -1,7 +1,7 @@
 DIST govee-ble-0.14.1.tar.gz 10498 BLAKE2B 11ffbd2c67cfdea6e2cac822db22e0ebbf9cb09979f473fb665ab813558398263142ec145e8a5d5e9da59dfb3cad254127fd59ce12c4cbd02b8fa250d9c75ec0 SHA512 7768a93b68ba33cd0fc25a48e44bb03f2cbf85f766945efe6d25a5d8bf207d14b23a9492b91f8fac313125848bfb0dfb3c491ce7cbabcffbe229d52818b6adbb
-DIST govee-ble-0.17.1.tar.gz 10517 BLAKE2B 2366552e6c727e663b5055c076148f8c228bd7ad590adad20d55d6705452f951399049000a6d8fab4cd914a170ce0f57e737525f6cc13ba2dd16473b21226cea SHA512 0cf6b4ac389014364d0e5e886503a01262b8d14a18658377f5c62400bf0a50df49af72443da1ba9ce0f091103f61e503f27291d5b612599b8f76b16a72944682
 DIST govee-ble-0.17.2.tar.gz 10531 BLAKE2B 6ec99a99986b997eea9772f45e6495417c248e50a6775a3d6fe29c9de6a8335c1367b9cb6c4735eaade36e34dfbf5fc94690df5b6f410d082c88942523fb1f84 SHA512 94c78b81352380791b61c715bc3996bd5151da11e79172379f5fd121eda0b615d824caaf2278a5a5ad51a044509a479820f5f828169f48cec0cc2b70824772b1
+DIST govee-ble-0.17.3.tar.gz 10541 BLAKE2B 157504afa75d92e3d9045238d611c1a02543ec33f4f8ae8be91167b010853901f202838f77ea16f1e8787bbf5a4883aeff906a988bffc519e375c20b1eacadbf SHA512 edb57ef0368a1166b65ba8b0c5eab9a321505809a0c2a77746bc73ca82b3bbe997b7b37285bc0790ae7f87f0799788dfc550c0abe9adf0fe3b6e40eabb283e36
 EBUILD govee-ble-0.14.1.ebuild 948 BLAKE2B 7a7de7b07c10d5252c7bffa2be1d8bf10c5e981a23b46ca148fb977f19efca9ae3e2825850ff5aa27db611f8503e15df201d8772309292e5bfc5fa39c893fcf7 SHA512 fa66e61b5c60b28c410e18e72ca44c7665c88a8dfbd9fd0c8f07df6213b6dd4ecdef72a2b5c44c00d52bd0427d20c01673143ceed0ab110b1c11567430784da0
-EBUILD govee-ble-0.17.1.ebuild 1007 BLAKE2B fb466b08329d3111cd256cbef61b4df90519b446eeb8972252e13e7947fbd22bc08673fa45b4a81c30c4049df00e264c1f2d2ae5354870578a46b6723155ca6a SHA512 38c88e810f3405e4e8747031fc63b03a86bafc928f2dc34dd70b015654fcf58780ad7db5e4dc338b4e8493b090c5626a03ab7374f750ef64b1021f0a11fe4659
 EBUILD govee-ble-0.17.2.ebuild 1007 BLAKE2B fb466b08329d3111cd256cbef61b4df90519b446eeb8972252e13e7947fbd22bc08673fa45b4a81c30c4049df00e264c1f2d2ae5354870578a46b6723155ca6a SHA512 38c88e810f3405e4e8747031fc63b03a86bafc928f2dc34dd70b015654fcf58780ad7db5e4dc338b4e8493b090c5626a03ab7374f750ef64b1021f0a11fe4659
+EBUILD govee-ble-0.17.3.ebuild 1007 BLAKE2B fb466b08329d3111cd256cbef61b4df90519b446eeb8972252e13e7947fbd22bc08673fa45b4a81c30c4049df00e264c1f2d2ae5354870578a46b6723155ca6a SHA512 38c88e810f3405e4e8747031fc63b03a86bafc928f2dc34dd70b015654fcf58780ad7db5e4dc338b4e8493b090c5626a03ab7374f750ef64b1021f0a11fe4659
 MISC metadata.xml 451 BLAKE2B 31421b90de32e8b33b029eafa639de251bb0c5072012c21e6840add59ee0955beb6e6fbef05b00e079984c8dfd4f792bebf4902892cf2403948f4d2052db16a9 SHA512 d83dd10295f47c3d253d693a23683a635dc5f5d4bd949f1d7fb678a63b2b22102e37e9b1a76ad282622b8a1d2091dac66d191bdb61fcbc128f83083e29eea24e
--- a/dev-python/govee-ble/govee-ble-0.17.3.ebuild
+++ b/dev-python/govee-ble/govee-ble-0.17.3.ebuild
--- a/dev-python/home-assistant-frontend/Manifest
+++ b/dev-python/home-assistant-frontend/Manifest
@@ -1,9 +1,11 @@
 DIST home-assistant-frontend-20220707.1.tar.xz 23005860 BLAKE2B 1d158cee11ad1d0f475d1ec43b16f9d58e960e9f04230554323f248ab3f2aa43caaf208d550b0ca0564d04a6d696be4b31182f36fa43e860054665f6239ea901 SHA512 cd8d2c428608aa88836eb8a1517c1a1a83c39a3b5d917abcc7baeae582ff441ffdfd7c5fc6e1814f88595239852d05f747b68ac87d522f505757eb589df8fcd8
 DIST home-assistant-frontend-20220802.0.tar.xz 23266160 BLAKE2B 33258e71dd47c5b1dcf30c38077ed497cd513275c120c1c500a8143ad938842edbdcd3a3d89bd6cf2c7120af8584286e1c552215e6435a4fcc48cec21d045dfd SHA512 504c246beadb0a18e327e705099f8294fcb4f9d7ea051b7a4aecb21e1d9635dc009415a1aea0397d35faa39c84193d59539fbf8fcbb5ac050361945182031b0a
-DIST home-assistant-frontend-20220906.0.tar.xz 23472328 BLAKE2B 1ce97da315c34b2238ee096f16adabd9198d0ae23982416972098ed0819e799c757dbe8f92cdafa7f1ab45f85f255a842123615a203dce4c65864a88d6a4df9e SHA512 4b9bf3594e5d1c1e60e3bf93684dd594bda982ca2ef511d55dc88b2fa4d93cec5d9f0db9190710dea2c912a7e61f6f05ac2daad29a40677bb4de8aab6837b24d
 DIST home-assistant-frontend-20220907.0.tar.xz 23416844 BLAKE2B 61db21f2440b723e2b5afd0f042b18dd83fede6910a0c92ed793f8e03b11f0895c56038e19a128dc93ab9f92d4812b74313f4a10f6cfda96aa922c0c14e45e2f SHA512 08121e8b81ad4f2e09b7c2e5d5546ae76e03285ba2403726891f3ce14f25c84b64f13b6b80bc86b819560d3631a240aad799ba7f6fde8ae9c6317371b1e7b6ec
+DIST home-assistant-frontend-20220907.1.tar.xz 23439832 BLAKE2B 9566554769100a5539731ee4a809b90d052d47fad37a810662138f6b717862935e911b354dc19ac103961800a10d55e0781a2afd82d78411084c7e28b85ad241 SHA512 acb74405feaea7dd2d364dc84f763739eb5c12981f91fc2386169f9bd701e11bfffa697f7e454bce1ec78151328f15021afd4d9b3d5439e45340a48fdcff7dac
+DIST home-assistant-frontend-20220907.2.tar.xz 23391612 BLAKE2B b12be2f51b4246e341f6f9e174c863385375b659e0cc886624e629cecec337713004adbe45867e053bdf446acff17b32fd908ecf49fb5b236085359244d123e4 SHA512 497fee53d5f1de531f27ab231010b361fc5822db1fc11be01b3cc452eb4b01322e4eff7704386ba1b04439ca19d3cc31482189f20064361696048c8a457417be
 EBUILD home-assistant-frontend-20220707.1.ebuild 774 BLAKE2B d5231497bc87f3c77474b16fcf4814ae6b3d285ff7c652408e281617ab6e15c20ed1c97c26f8e8151282d94794b5f67bbd378551f03b88f3b70131a38888c2b7 SHA512 583d972758e831b429c2af2d8747d5acc35277a749b2728fdf2f224907b5be55af64e869dc1106f6d937d37c8df8bf4dfae54b6825a312f52f780192f1b15fef
 EBUILD home-assistant-frontend-20220802.0.ebuild 774 BLAKE2B d5231497bc87f3c77474b16fcf4814ae6b3d285ff7c652408e281617ab6e15c20ed1c97c26f8e8151282d94794b5f67bbd378551f03b88f3b70131a38888c2b7 SHA512 583d972758e831b429c2af2d8747d5acc35277a749b2728fdf2f224907b5be55af64e869dc1106f6d937d37c8df8bf4dfae54b6825a312f52f780192f1b15fef
-EBUILD home-assistant-frontend-20220906.0.ebuild 774 BLAKE2B d5231497bc87f3c77474b16fcf4814ae6b3d285ff7c652408e281617ab6e15c20ed1c97c26f8e8151282d94794b5f67bbd378551f03b88f3b70131a38888c2b7 SHA512 583d972758e831b429c2af2d8747d5acc35277a749b2728fdf2f224907b5be55af64e869dc1106f6d937d37c8df8bf4dfae54b6825a312f52f780192f1b15fef
 EBUILD home-assistant-frontend-20220907.0.ebuild 774 BLAKE2B d5231497bc87f3c77474b16fcf4814ae6b3d285ff7c652408e281617ab6e15c20ed1c97c26f8e8151282d94794b5f67bbd378551f03b88f3b70131a38888c2b7 SHA512 583d972758e831b429c2af2d8747d5acc35277a749b2728fdf2f224907b5be55af64e869dc1106f6d937d37c8df8bf4dfae54b6825a312f52f780192f1b15fef
+EBUILD home-assistant-frontend-20220907.1.ebuild 774 BLAKE2B d5231497bc87f3c77474b16fcf4814ae6b3d285ff7c652408e281617ab6e15c20ed1c97c26f8e8151282d94794b5f67bbd378551f03b88f3b70131a38888c2b7 SHA512 583d972758e831b429c2af2d8747d5acc35277a749b2728fdf2f224907b5be55af64e869dc1106f6d937d37c8df8bf4dfae54b6825a312f52f780192f1b15fef
+EBUILD home-assistant-frontend-20220907.2.ebuild 774 BLAKE2B d5231497bc87f3c77474b16fcf4814ae6b3d285ff7c652408e281617ab6e15c20ed1c97c26f8e8151282d94794b5f67bbd378551f03b88f3b70131a38888c2b7 SHA512 583d972758e831b429c2af2d8747d5acc35277a749b2728fdf2f224907b5be55af64e869dc1106f6d937d37c8df8bf4dfae54b6825a312f52f780192f1b15fef
 MISC metadata.xml 485 BLAKE2B db31a294d5ca2f4824e6ab06aaf266b0182e1c9b49d5aeafd299fd408fc5a96d0db3ac4d72732291b0c7f74480dab6cd4febcbeced136372db499d67eb46edac SHA512 c5a5ddd828915cd14975e480b2c6c9aa599aeb32ee6d7bfef4995450fa8b6d4cdc4b281c34c4cc34d4b15f8443c1d780bf72b5f5443edbcd50054fa434f367e5
--- a/dev-python/home-assistant-frontend/home-assistant-frontend-20220907.1.ebuild
+++ b/dev-python/home-assistant-frontend/home-assistant-frontend-20220907.1.ebuild
--- a/dev-python/home-assistant-frontend/home-assistant-frontend-20220907.2.ebuild
+++ b/dev-python/home-assistant-frontend/home-assistant-frontend-20220907.2.ebuild
@@ -0,0 +1,32 @@
+# Copyright 1999-2022 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=8
+
+PYTHON_COMPAT=( python3_{8..11} )
+DISTUTILS_USE_PEP517=setuptools
+
+inherit distutils-r1
+
+DESCRIPTION="The Home Assistant frontend"
+HOMEPAGE="https://github.com/home-assistant/frontend https://pypi.org/project/home-assistant-frontend/"
+SRC_URI="https://hasf.edevau.net/${P:0:1}/${PN}/${P}.tar.xz"
+
+LICENSE="Apache-2.0"
+SLOT="0"
+KEYWORDS="amd64 arm arm64 x86"
+IUSE="test"
+RESTRICT="!test? ( test )"
+
+RDEPEND="~dev-python/user-agents-2.0[${PYTHON_USEDEP}]"
+BDEPEND="
+	dev-python/setuptools[${PYTHON_USEDEP}]
+	test? (
+		dev-python/nose[${PYTHON_USEDEP}]
+		dev-python/pytest[${PYTHON_USEDEP}]
+	)"
+
+python_test() {
+	nosetests --verbose || die
+	py.test -v -v || die
+}
--- a/dev-python/led-ble/Manifest
+++ b/dev-python/led-ble/Manifest
@@ -1,5 +1,5 @@
-DIST led-ble-0.7.1.tar.gz 16285 BLAKE2B f91ec0b8e8c5c51473afa464273e5e6aa469b519eaf720523b0bfd6c85fad7cb412019a0f1245fdb7dc112fb2c6edc0ea7c904565d0cf62e4db6fec4c2d51983 SHA512 d69796724b89af97c5d7673fd50411ceaf698472156b1f1bdde1cc78e3de4378f0fd6f9d8f0b7ad8275ac5b2a314ff18f3eac3836ad558398e2daa7d04c53181
+DIST led-ble-0.10.0.tar.gz 16311 BLAKE2B 275becf7bf21c30b7e03c2b198ba3d1cbaa32c2715ac0494c3a09524584c819a4b87b74f07290e7a1d1f571524da14187f9c180e2339c71a009cb5dbf87550a2 SHA512 b2af3b66ad7ace0c54b45ce05a4dc1a8cdf21b34fddba98b2215a7a8db0213de4325226140569c0a7afa327b661824776dabfffd8500aa91a3b08edd950f5c8b
 DIST led-ble-0.9.1.tar.gz 16320 BLAKE2B 19c7f31cd831960da7fa65a46ac45bf987eadfa825784a6c5bb7ee4c15f4f679c5ade711fae71fc536066a67f5d1d1f9a1692f6d85fd3b7ca2aa428429792a96 SHA512 b8ff03d1d3bf2f2510209d8d9ade0f2d491675d166e91f08ba39ea289e4f36b81c1a06761d1034e868acee2a8a6f54a7fc40182c340523e8d3a693c985436e2b
-EBUILD led-ble-0.7.1.ebuild 981 BLAKE2B 73052a0f0802ff4ebdde4caf464758ca225dd62be1cb66abae43fbb73abf394754e32f27422a5775d8d68ee8a1635ad6f2a43bc18a3afb29b7218704bfc193a5 SHA512 3caabf369b88b5aa67d890dca374c33c8ee73a08e208d8bfe5def3265d8d7fe65027aca33d75c179961c4249bcf5357f7b6130e9b3bf597e90e2afbac47d4d6a
+EBUILD led-ble-0.10.0.ebuild 981 BLAKE2B 1b1b7b391c564029fc25a6431336d152886346040d74f052f60655559a11d91e4f78c53055e572e8a27175f8b3b7f238f37368d415084b5de5bed28b56ed44d5 SHA512 e8fb378e8b934e27ccd3c12b2032764dac7ee7ec4012bf51989c4ac7ddc1ecaf0177ceca98d40dafa1014e822a09f57d82e8d50c89ec315785b5c5a08d81ba3b
 EBUILD led-ble-0.9.1.ebuild 981 BLAKE2B 83f92a75e7b89c47fd9fd80917ce909e95272786d8212f0f1a1c550eb4797d2619116b6a7a1e63d595687d9dd555038782a39de262cabe9740e36d00a2955a3e SHA512 8dae4c28cabb452826fd87201e2b6cb9f274dbac5026e444b5a698f465cd89a86459f076000a1170ba05db33a7c731eb24616c702f67f3bafe7a2ddb33fe5dff
 MISC metadata.xml 449 BLAKE2B 4d45f8a25c460ba45022f0e288066fb7b20aed729c29a2f5c58a6ad52c7cad4c9d60104d729aae449c86a6b43b5e4397b8e5c962241a3c2d69163da9ea03492c SHA512 15e7e479f2112ca3d6a6bb1e9f1f35f56d0a552162deb747dbe0c46da7b424fec323cd2cf1a0a876da2c9a36a7112151e29eecd231c90551ac6e9af013b6a36f
--- a/dev-python/led-ble/led-ble-0.10.0.ebuild
+++ b/dev-python/led-ble/led-ble-0.10.0.ebuild
@@ -19,8 +19,8 @@ RESTRICT="!test? ( test )"

 DOCS="README.md"

-RDEPEND=">=dev-python/bleak-0.15.1[${PYTHON_USEDEP}]
-	>=dev-python/bleak-retry-connector-1.11.0[${PYTHON_USEDEP}]
+RDEPEND=">=dev-python/bleak-0.17.0[${PYTHON_USEDEP}]
+	>=dev-python/bleak-retry-connector-1.15.0[${PYTHON_USEDEP}]
 	>=dev-python/async-timeout-4.0.1[${PYTHON_USEDEP}]
 	>=dev-python/flux-led-0.28.32[${PYTHON_USEDEP}]"
 BDEPEND="
--- a/dev-python/pyipma/Manifest
+++ b/dev-python/pyipma/Manifest
@@ -1,5 +1,7 @@
 DIST pyipma-2.0.5.tar.gz 5718 BLAKE2B 0918441bcff5ae0c2be7fc8c7018f33ddb38ddd7944f0482f5b9d3cefb48c967b4d927f846f59bc7df39cebb3fcd767c594d0393e7cf5c1184f167ec4e6ab484 SHA512 a2e59c8562125b07b02285130ef0ca876a8e265d4d8bccff398008e008492204e3556273fca6943281658ec7645de1888721078f79326e7389a3de28ab51d3db
 DIST pyipma-3.0.2.tar.gz 9498 BLAKE2B 94d9f886fd77db96270ae82a7a7e059002be3b7084d263f2b2acc933bd043230e8b6afff01aed8885021e7735f88b87193ef8ad202c094f9f0cb1ba1e95f5903 SHA512 eb601ac02fbb21998a054deee8054b94965c668f2aca4f48fbbd0e05346c00b58081cb992e48b3fa72f8a95f22b43baf8e4b5752c8c714b98ad828b86ed66a6b
+DIST pyipma-3.0.4.tar.gz 13939 BLAKE2B a25e302faacaeda1ed5633ddca880fff04fb4d387fe1a50717f05704a0bab0acec1eae9f92bb33aa80fb94bc83277773e82a01c99e17f68f27af20a585c17d39 SHA512 a4b301994a878991ef411f7cf4b1ea7a937a47b8398f3570fcea5356d9c18442762dd43c7e10524cffadccd87d0e4ad4d5f51b2f01119d023f8afa799638bf56
 EBUILD pyipma-2.0.5.ebuild 798 BLAKE2B 4c2f594ae459c8d323fbd5e868d9ea3ea54fb167f561e7c73386bf5abb0de8cfec5b8a4e5a84a1402587f1265c3b41d9509e266bf05e3314b61978aaeafb16dd SHA512 f4ef9a6b2bc18f71b6a09bdccde6764657ee3dc466adc65a21af187d3e65f185d2431d22885ec150fdcd435258e3736983677a4e78dbe6173c3bdd1778ee7c37
 EBUILD pyipma-3.0.2.ebuild 829 BLAKE2B 1994307a0d19b539e523245fad53d9932259b449579b13a3cdd1e04b93c927922fc8f797ef97a518ce48dedf13e4025182e9118c73f5d54df7344c279abc0e13 SHA512 f37f4da18a83160134a2c3efbbd878f343aa64a6608ab2db2e7b8b14ff9c63acdcfb8e299294eb44b54a7e8b8dde74c163dcd8906e06f91ef4838c5665a7b779
+EBUILD pyipma-3.0.4.ebuild 837 BLAKE2B 1e0bbf704c64defebd242f737a560df3d47a7187772661b06b99bc1095b5d13bd0ee94679e705a83bbb2f3e7b6321299614df2d2a3eff1ced9d6fd649e180904 SHA512 9eba6bda91b691f45e1b9d7f7efd51431b19cb838deb7b04207a6e2925594559cf32a2ebaa181b4a668e307e9b9ec42f1369d236485cee379998fe2129792022
 MISC metadata.xml 450 BLAKE2B df2dc3a7c513d92b085f725112251b13442ccc1da6bfdb53413adeb923ce4dd3224901b1bbfc36946900f1658d8dcce00e6fde3f73bb1fee873bbff869b30ed8 SHA512 3d1b615084cf02b699db3fd46762ef1386e20eaf52c98223aa926b954c162bdabef76bc0e7a607103fbb4bc5da72165615274602a0908fde2bb2261267d9883a
--- a/dev-python/pyipma/pyipma-3.0.4.ebuild
+++ b/dev-python/pyipma/pyipma-3.0.4.ebuild
@@ -0,0 +1,36 @@
+# Copyright 1999-2022 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=8
+
+PYTHON_COMPAT=( python3_{8..11} )
+
+inherit distutils-r1
+
+DESCRIPTION="Python library to retrieve information from Instituto PortuguÃªs do Mar e Atmosfera"
+HOMEPAGE="https://github.com/dgomes/pyipma https://pypi.org/project/pyipma/"
+SRC_URI="mirror://pypi/${P:0:1}/${PN}/${P}.tar.gz"
+
+LICENSE="MIT"
+SLOT="0"
+KEYWORDS="amd64 arm arm64 x86"
+IUSE="test"
+RESTRICT="!test? ( test )"
+
+DOCS="README.md"
+
+RDEPEND="dev-python/aiohttp[${PYTHON_USEDEP}]
+	sci-geosciences/geopy[${PYTHON_USEDEP}]"
+BDEPEND="
+	dev-python/setuptools[${PYTHON_USEDEP}]
+	test? (
+		dev-python/nose[${PYTHON_USEDEP}]
+		dev-python/pytest[${PYTHON_USEDEP}]
+	)"
+
+python_test() {
+	nosetests --verbose || die
+	py.test -v -v || die
+}
+
+distutils_enable_tests pytest
--- a/dev-python/xiaomi-ble/Manifest
+++ b/dev-python/xiaomi-ble/Manifest
@@ -1,7 +1,7 @@
+DIST xiaomi-ble-0.10.0.tar.gz 21076 BLAKE2B 7a0b5eb32c795a38aea3b1875f8babbbeadb2c1fb34e49a4a8cba21561b77baeb4cc98546b6998f2bb3a99ac6ffa5b15a22292b130de2b014a2c80210042552b SHA512 0c703e1694ccf63391cfb562845f10aaf664d9aa95696b0e7170ec2cbd235284b94b9299644c462fd769cd596411ffb5af75b1826fccd9416bf7f0ae7a7deed7
 DIST xiaomi-ble-0.6.4.tar.gz 19735 BLAKE2B 3297de42a9078be1e85e66565abdae9c91f3a341dddb20d36ee5e58700e61d9a751f83443c3fa6c0e12f9aca51fc5a41d2944837f971b78439d90625f616eb3c SHA512 5bf981cd1170d4986c432e4928f6add1c52e5766a7db591eb74b7ee5bdb6a8799aa375ea658c896f343743991420bd9e2462d91ec3485302da19521f23146c77
 DIST xiaomi-ble-0.9.0.tar.gz 21082 BLAKE2B 5d93fbb0fa0b837cbc986429da137271588b6c0c11b5820f4ed042953098934b02c4cfb490e50976f812c356b8c7b232318ca25e2135dbae74676e7bdbbce8f0 SHA512 760d68f8fbbcbf9e6b1cb66630a5a312f5f6ddf944092bb2de4eca75f5dc16b4050eb030d6c53ea0e6cb6fc402d80658c40f9c63cfc959367c72b52f1e5384e2
-DIST xiaomi-ble-0.9.2.tar.gz 21089 BLAKE2B f567700b5d49f886510235c72768b7501a6f88d11cf343618e4fc4cc1c17e64419efc57fdab7b24b6c3644595f6e0d215c738b983889a61edaf8a73280ea3dc5 SHA512 65fecc5d2412db91262b0c021d0e11daeff7850179a65d5b09808a7c20f76789e711087f9edd88b2bc797cec72034c15c11e5fb266723d5c1a012f5e49a1da3d
+EBUILD xiaomi-ble-0.10.0.ebuild 1155 BLAKE2B 599ed029d518e4f54c462a4f9387b4ddf6e089e4b52805f76ce40532d08042e771e72495776325c609d733807ab703e6497cc11c79541354017af8b6d761fda4 SHA512 73522caa37eb8ec506eb131fe933aa9e76f29936b9d635c4579fa8578d702be2fe5cc436bf711d8919660d1455027bd22ae65c467411507409189f2c2e9b0e8b
 EBUILD xiaomi-ble-0.6.4.ebuild 1050 BLAKE2B 852d6cd4bfdd2be1381c70858da9f315c6dfecd4ca911692067c3a546ca3b0ac804e0580ac3819ca820955fbda549090e05ee6e73358beef2ca534c27e011fba SHA512 7abd313acf028a891e2994a1bcf167819ce9af23f7a772b1526275cd26d94be57e08febd0d7e643733b575127ac8f54e79f4bfe6abf4e1198a586029d550234c
 EBUILD xiaomi-ble-0.9.0.ebuild 1050 BLAKE2B 0d959adf95c54495b9bc1594ec8d34774bbda0dba6987de43cbe510fa73c5bc745b9e951c80c758b6762bf19e91d72c24059eaf72d6e6e7591fdfb963ed3657c SHA512 09ed44ccc238905f61d82fde9f366d43d446b25885ec375efa2ce7fd58ffbdaf1d19fd38c0aefa17fa8f410515157a5415925c916a4491c12f318092c7938c61
-EBUILD xiaomi-ble-0.9.2.ebuild 1110 BLAKE2B 408c2540f9599d424db96946dbd1609f82955b2949fc57118aa4f6dcef743d7ad6c1dad3b002f64a019e29c8a76169e8def925369632bf9979f8bbfa60e36b27 SHA512 36a47a7702202a4e0ff047ffc0abf56aa13140b1a90c3f6bfd6e2cdb69c33b146b2bce4a5e4dd51b090f2b9e748d5d87071d16e0191f6b393d658b102b980f1c
 MISC metadata.xml 456 BLAKE2B 396f5235c138aa794e16f4a2ff42d3505e2d3b38b055b135b9224ad94add070b586cc3a6d8847cf53135c49d62e4bb88edffc11bcc99721b1fb5a3ebb46e9dba SHA512 c27ec3846e1fadd63b0a4b77a9fa63483e9ef2dbb1fc3d98ce2a2410a6e63211395f01706ca762749b82c8c2587b350dad5543bef81df68c3dcde1495efd63f0
--- a/dev-python/xiaomi-ble/xiaomi-ble-0.10.0.ebuild
+++ b/dev-python/xiaomi-ble/xiaomi-ble-0.10.0.ebuild
@@ -24,8 +24,9 @@ RDEPEND=">=dev-python/home-assistant-bluetooth-1.3.0[${PYTHON_USEDEP}]
 	>=dev-python/sensor-state-data-2.1.2[${PYTHON_USEDEP}]
 	>=dev-python/bluetooth-sensor-state-data-1.5.0[${PYTHON_USEDEP}]
 	>=dev-python/pycryptodomex-3.15.0[${PYTHON_USEDEP}]
-	>=dev-python/bleak-retry-connector-1.11.0[${PYTHON_USEDEP}]
-	>=dev-python/bluetooth-data-tools-0.1.2[${PYTHON_USEDEP}]"
+	>=dev-python/bleak-retry-connector-1.15.0[${PYTHON_USEDEP}]
+	>=dev-python/bluetooth-data-tools-0.1.2[${PYTHON_USEDEP}]
+	>=dev-python/bleak-0.17.0[${PYTHON_USEDEP}]"
 BDEPEND="
 	dev-python/setuptools[${PYTHON_USEDEP}]
 	test? (
--- a/dev-python/yalexs-ble/Manifest
+++ b/dev-python/yalexs-ble/Manifest
@@ -1,5 +1,5 @@
-DIST yalexs-ble-1.6.4.tar.gz 28233 BLAKE2B 4a1113b0e879dd047199351dbf85ea429d51df8559c475a60fff88c8131c1ba2f8ef316b24a65102e6b7523702dfe2810058c45144520565a5c9a84e8542ea71 SHA512 aea59d19c36f084597109ffe15ecdfd45980e407df347a834773cf039749bf1847b105a4e3d1b0d3cd85098b76217c3e2abcb78358e73597357f784ea7427059
 DIST yalexs-ble-1.8.1.tar.gz 28229 BLAKE2B 85f1f7a5644af40ee855fd97b2f5f22c5e6ac84290be6f661efd9596d6201e9eab9476c52e9e6c05211079c2dd4d6dbeabfc2664952490a3f29978a8d3cdb3af SHA512 228216d6e4424e0cf744e6bf9aae2aa21dda995fb8e662cd8dee08e16794a9924863da8716ab2a7fe6d64f35e8b250cb76f514abdb841e508a3e0c3c7f32ec3a
-EBUILD yalexs-ble-1.6.4.ebuild 963 BLAKE2B 1b8ffccec5890de0f6a324e0d489ed47f0e1ef87f6894c332e55771a5326e5e30e0d80523f7c48a7bc88c86072e9347a21d7ec2122b8d0cfe9356a0f45304b0e SHA512 c87490c576abdeab4255505e3360e936c4f7d6af6fad349ba7a701d599eb52d549c181a1a7c9ffac5455d3ad6371c09f37bd9d0d3c8771190504e92fadd46acf
+DIST yalexs-ble-1.9.0.tar.gz 28060 BLAKE2B a7b81d5e4652d3269e102c699724b9ac08f0f61142e5212eed4d85c685b57421d35897a2e01d27994fb9d53381f28468613882c8f49322440a1c472c19523740 SHA512 4f0fb5ee731af875671ab55e79e8dfb5059deeb5c0d18061a3fd3936017bb37d81a77e815a2f90ad072cc998dc886aed6b506f05ae06413792f3fa1d1dfba129
 EBUILD yalexs-ble-1.8.1.ebuild 963 BLAKE2B 4529c685e2ab58e5aee00a7c2389f1d804a207627ab403d3a69306eb9cd65a38b9051dc9a32107afb033e041147f7490c44f00f9d794e4fe7eaa0368b9850667 SHA512 a1f432328f92d6be55f7db83bddc9ce08fa240452695d92d21320c10727c5d2398c9fb8729fbf51063f7678fa1bfa47205be32e4cb13e94e0ab3719f23685ed8
+EBUILD yalexs-ble-1.9.0.ebuild 1051 BLAKE2B 241e1a33bfcf74b9a5d9e475b305c02d3df78679d4793ba2f35daf5629df5e32d02c32c8156e297b1e2412845957aa0c622685e10d2cbcdb5ca7e0291e0e57ed SHA512 ec5348bcad0cb1f8c5580b9c543b35f2d890e14646ee66745d42dfb97c4464d17823b5dc111363757fb92f20d14ec0c3e7610e328e5597c994d294e91d753135
 MISC metadata.xml 452 BLAKE2B e45333c3ef92995c8fb60a18f6e72510e1fa01dfa5fd766548f371d526b4905f9b975602a22f80d22de3a9b8e1a8760b3f0ef67444c03106c2d2a143598d6aaf SHA512 30654b5de14efdcfc41028d21e325113a011dea7bd95cb1c2ad12d3bd403b86929fe667182e8246391351d3f37ac7719579874e71cbef32c1376701b5d10aebf
--- a/dev-python/yalexs-ble/yalexs-ble-1.9.0.ebuild
+++ b/dev-python/yalexs-ble/yalexs-ble-1.9.0.ebuild
@@ -22,13 +22,15 @@ DOCS="README.md"

 RDEPEND=">=dev-python/bleak-0.14.3[${PYTHON_USEDEP}]
 	>=dev-python/pycryptodome-3.15.0[${PYTHON_USEDEP}]
-	>=dev-python/bleak-retry-connector-1.11.0[${PYTHON_USEDEP}]
+	>=dev-python/bleak-retry-connector-1.15.0[${PYTHON_USEDEP}]
 	>=dev-python/async-timeout-4.0.1[${PYTHON_USEDEP}]"
 BDEPEND="
 	dev-python/setuptools[${PYTHON_USEDEP}]
 	test? (
 		dev-python/nose[${PYTHON_USEDEP}]
 		dev-python/pytest[${PYTHON_USEDEP}]
+		dev-python/pytest-asyncio[${PYTHON_USEDEP}]
+		dev-python/pytest-cov[${PYTHON_USEDEP}]
 	)"

 python_test() {
--- a/requirements_all.txt
+++ b/requirements_all.txt
@@ -36,7 +36,7 @@ aiobotocore==2.1.0
 aiocache==0.11.1
 aiocoap==0.4.3
 aioconsole==0.5.1
-aiodiscover==1.4.11
+aiodiscover==1.4.13
 aiodns==3.0.0
 aioeafm==0.1.2
 aioeagle==1.1.0
@@ -49,7 +49,7 @@ aioftp==0.12.0
 aiogithubapi==22.2.4
 aioguardian==2022.7.0
 aioharmony==0.2.9
-aiohomekit==1.5.6
+aiohomekit==1.5.7
 aiohttp-cors==0.7.0
 aiohttp==3.8.1
 aiohue==4.5.0
@@ -160,18 +160,19 @@ bitarray==2.6.0
 bitstring==3.1.9
 bizkaibus==0.1.1
 bleach==5.0.1
-bleak-retry-connector==1.14.0
-bleak==0.16.0
+bleak-retry-connector==1.15.1
+bleak-retry-connector==1.16.0
+bleak==0.17.0
 blebox-uniapi==2.0.2
 blinker==1.5
-blinkpy==0.19.0
+blinkpy==0.19.2
 BlinkStick==1.2.0
 blinkt==0.1.0
 blockchain==1.4.4
 bluemaestro-ble==0.2.0
 bluepy==1.3.0
 bluetooth-adapters==0.4.1
-bluetooth-auto-recovery==0.3.2
+bluetooth-auto-recovery==0.3.3
 bluetooth-data-tools==0.1.2
 bluetooth-sensor-state-data==1.6.0
 bluez==5.64
@@ -259,7 +260,6 @@ datadog==0.15.0
 datapoint==0.9.8
 dateparser==1.0.0
 dbus-fast==1.4.0
-dbus-next==0.2.3
 dbus==1.14.0
 debianutils==5.7
 decora-wifi==1.4
@@ -388,7 +388,7 @@ google-nest-sdm==2.0.0
 googleapis-common-protos==1.56.4
 googlemaps==2.5.1
 goslide-api==0.5.1
-govee-ble==0.17.2
+govee-ble==0.17.3
 gpiozero==1.6.2
 gps3==0.33.3
 graphql-subscription-manager==0.6.1
@@ -403,10 +403,10 @@ growattServer==1.2.2
 grpc-google-iam-v1==0.12.3
 grpcio-status==1.48.0
 grpcio==1.48.0
-gst-plugins-base==1.20.2
-gst-plugins-libav==1.20.2
+gst-plugins-base==1.20.3
+gst-plugins-libav==1.20.3
 gstreamer-player==1.1.2
-gstreamer==1.20.2
+gstreamer==1.20.3
 gTTS==2.2.4
 guppy3==3.1.2
 gzip==1.12
@@ -435,7 +435,7 @@ holidays==0.14.2
 home-assistant-bluetooth==1.3.0
 home-assistant-bluetooth==1.4.0
 home-assistant-cli==9999
-home-assistant-frontend==20220907.0
+home-assistant-frontend==20220907.2
 homeassistant
 homeconnect==0.7.2
 homematicip==1.0.7
@@ -519,7 +519,7 @@ lacrosse-view==0.0.9
 lakeside==0.12
 lark==1.1.2
 laundrify-aio==1.1.2
-led-ble==0.9.1
+led-ble==0.10.0
 libcap==2.65
 libcrypt==2
 libcst==0.3.23
@@ -825,7 +825,7 @@ pyialarmxr-homeassistant==1.0.18
 pyicloud==1.0.0
 pyinsteon==1.2.0
 pyintesishome==1.8.0
-pyipma==3.0.2
+pyipma==3.0.4
 pyipp==0.11.0
 pyiqvia==2022.4.0
 pyirishrail==0.0.2
@@ -949,7 +949,7 @@ pyspcwebgw==0.4.0
 pysqueezebox==0.6.0
 pystiebeleltron==0.0.1
 pysuez==0.1.19
-PySwitchbot==0.19.5
+PySwitchbot==0.19.8
 PySwitchmate==0.5.1
 PySyncThru==0.7.10
 pytankerkoenig==0.0.6
@@ -1024,7 +1024,7 @@ PyUserInput==0.1.11
 pyvera==0.3.13
 pyversasense==0.0.6
 pyvesync==2.0.3
-PyViCare==2.16.2
+PyViCare==2.17.0
 pyvizio==0.1.57
 pyvlx==0.2.20
 pyvolumio==0.1.5
@@ -1289,7 +1289,7 @@ XBee==2.3.2
 xbox-webapi==2.0.11
 xboxapi==2.0.1
 xerces-c==3.2.3
-xiaomi-ble==0.9.0
+xiaomi-ble==0.10.0
 xknx==1.0.2
 xmlschema==2.0.1
 xmltodict==0.13.0
@@ -1297,7 +1297,7 @@ xs1-api-client==3.0.0
 xxhash==0.8.1
 xxhash==3.0.0
 yalesmartalarmclient==0.3.9
-yalexs-ble==1.8.1
+yalexs-ble==1.9.0
 yalexs==1.2.1
 yarl==1.7.2
 yarl==1.8.1
Author	SHA1	Message	Date
Andreas Billmeier	f33a2ea7db	Merge pull request #125 from onkelbeh/2022.9.4 2022.9.4	2022-09-15 18:32:29 +02:00
Andreas Billmeier (@Home/mbp)	ccbb1e0c34	update homeassistant-2022.9.4	2022-09-15 18:19:25 +02:00
Andreas Billmeier (@Home/mbp)	c75e9675a6	bump home-assistant-frontend-20220907.2	2022-09-15 18:17:42 +02:00
Andreas Billmeier (@Home/mbp)	2506a96ba4	remove olds	2022-09-15 18:13:53 +02:00
Andreas Billmeier	b820fa4c98	Merge pull request #124 from onkelbeh/2022.9.3 2022.9.3	2022-09-14 20:51:48 +02:00
Andreas Billmeier (@Home/mbp)	b43128e118	update homeassistant-2022.9.3	2022-09-14 20:42:37 +02:00
Andreas Billmeier (@Home/mbp)	606f27c176	update yalexs-ble-1.9.0	2022-09-14 20:40:47 +02:00
Andreas Billmeier (@Home/mbp)	745b31e661	update xiaomi-ble-0.10.0	2022-09-14 20:38:30 +02:00
Andreas Billmeier (@Home/mbp)	56fa82dcfc	bump PyViCare-2.17.0	2022-09-14 20:35:42 +02:00
Andreas Billmeier (@Home/mbp)	c1d26d792c	update PySwitchbot-0.19.8	2022-09-14 20:32:05 +02:00
Andreas Billmeier (@Home/mbp)	7c3aabf34e	update led-ble-0.10.0	2022-09-14 20:29:31 +02:00
Andreas Billmeier (@Home/mbp)	c45702b46e	bump pyipma-3.0.4	2022-09-14 20:27:36 +02:00
Andreas Billmeier (@Home/mbp)	04d36b6f11	update iohomekit-1.5.7	2022-09-14 20:25:22 +02:00
Andreas Billmeier (@Home/mbp)	d43e9ec16a	bump govee-ble-0.17.3	2022-09-14 20:22:50 +02:00
Andreas Billmeier (@Home/mbp)	4188356b73	bump home-assistant-frontend-20220907.1	2022-09-14 20:20:43 +02:00
Andreas Billmeier (@Home/mbp)	0bae0d6b4b	update aiodiscover-1.4.13	2022-09-14 20:18:31 +02:00
Andreas Billmeier (@Home/mbp)	8278bfdb32	bump bluetooth-auto-recovery-0.3.3	2022-09-14 20:15:30 +02:00
Andreas Billmeier (@Home/mbp)	592e03881c	update bleak-0.17.0	2022-09-14 20:13:42 +02:00
Andreas Billmeier (@Home/mbp)	4b2860b7ff	bump bleak-retry-connector-1.15.1 bump bleak-retry-connector-1.16.0	2022-09-14 20:11:25 +02:00
Andreas Billmeier (@Home/mbp)	1ed17a70d2	bump blinkpy-0.19.2	2022-09-14 20:07:18 +02:00
Andreas Billmeier (@Home/mbp)	ec3cbff0ee	remove olds	2022-09-14 20:03:24 +02:00