build: homologize path handling

Use consistent `e_somepath` names for expanded versions of `somepath`.
Also remove all paths from `config.h` and put them into
`lib/config_paths.h` - this is to make more obvious when someone is
doing something probably not quite properly structured.

Signed-off-by: David Lamparter <equinox@opensourcerouting.org>

Makefile.am

@@ -56,7 +56,7 @@ MODULE_LDFLAGS = \
 	$(SAN_FLAGS) \
 	# end
 
-DEFS = @DEFS@ -DSYSCONFDIR=\"$(CFG_SYSCONF)/\" -DCONFDATE=$(CONFDATE)
+DEFS = @DEFS@ -DCONFDATE=$(CONFDATE)
 
 AR_FLAGS = @AR_FLAGS@
 ARFLAGS = @ARFLAGS@

configure.ac

@@ -2715,31 +2715,26 @@ fi
 AC_SUBST([CONFDATE])
 
 dnl get the full path, recursing through variables...
-AX_RECURSIVE_EVAL([$bindir/vtysh],    [vtysh_bin])
-AX_RECURSIVE_EVAL([$frr_sysconfdir],  [CFG_SYSCONF])
-AX_RECURSIVE_EVAL([$sbindir],         [CFG_SBIN])
-AX_RECURSIVE_EVAL([$bindir],          [CFG_BIN])
-AX_RECURSIVE_EVAL([$frr_runstatedir], [CFG_STATE])
-AX_RECURSIVE_EVAL([$frr_libstatedir], [CFG_LIBSTATE])
-AX_RECURSIVE_EVAL([$moduledir],       [CFG_MODULE])
-AX_RECURSIVE_EVAL([$yangmodelsdir],   [CFG_YANGMODELS])
-AX_RECURSIVE_EVAL([$scriptdir],       [CFG_SCRIPT])
-AC_SUBST([vtysh_bin])
-AC_SUBST([CFG_SYSCONF])
-AC_SUBST([CFG_SBIN])
-AC_SUBST([CFG_BIN])
-AC_SUBST([CFG_STATE])
-dnl AC_SUBST([CFG_LIBSTATE]) -- not currently used
-AC_SUBST([CFG_MODULE])
-AC_SUBST([CFG_SCRIPT])
-AC_SUBST([CFG_YANGMODELS])
-AC_DEFINE_UNQUOTED([VTYSH_BIN_PATH], ["$vtysh_bin"], [path to vtysh binary])
-AC_DEFINE_UNQUOTED([MODULE_PATH], ["$CFG_MODULE"], [path to modules])
-AC_DEFINE_UNQUOTED([SCRIPT_PATH], ["$CFG_SCRIPT"], [path to scripts])
-AC_DEFINE_UNQUOTED([FRR_RUNSTATE_PATH], ["$CFG_STATE"], [/run/frr equivalent])
-AC_DEFINE_UNQUOTED([FRR_LIBSTATE_PATH], ["$CFG_LIBSTATE"], [/var/lib/frr equivalent])
-AC_DEFINE_UNQUOTED([YANG_MODELS_PATH], ["$CFG_YANGMODELS"], [path to YANG data models])
-AC_DEFINE_UNQUOTED([WATCHFRR_SH_PATH], ["${CFG_SBIN%/}/watchfrr.sh"], [path to watchfrr.sh])
+AC_DEFUN([AX_SUBST_EXPANDED], [
+  AX_RECURSIVE_EVAL([[$]$1], [e_$1])
+  AC_SUBST([e_$1])
+])
+
+AX_SUBST_EXPANDED([bindir])
+AX_SUBST_EXPANDED([sbindir])
+AX_SUBST_EXPANDED([frr_sysconfdir])
+AX_SUBST_EXPANDED([frr_runstatedir])
+AX_SUBST_EXPANDED([frr_libstatedir])
+AX_SUBST_EXPANDED([moduledir])
+AX_SUBST_EXPANDED([yangmodelsdir])
+AX_SUBST_EXPANDED([scriptdir])
+
+dnl strip duplicate trailing slashes if necessary
+dnl note this uses e_bindir / e_sbindir created above
+watchfrr_sh="\${e_sbindir%/}/watchfrr.sh"
+AX_SUBST_EXPANDED([watchfrr_sh])
+vtysh_bin="\${e_bindir%/}/vtysh"
+AX_SUBST_EXPANDED([vtysh_bin])
 
 dnl various features
 AM_CONDITIONAL([SUPPORT_REALMS], [test "$enable_realms" = "yes"])
@@ -2811,6 +2806,7 @@ AC_CONFIG_FILES([
 	  alpine/APKBUILD
 	  snapcraft/snapcraft.yaml
 	  lib/version.h
+	  lib/config_paths.h
 	  tests/lib/cli/test_cli.refout pkgsrc/mgmtd.sh
 	  pkgsrc/bgpd.sh pkgsrc/ospf6d.sh pkgsrc/ospfd.sh
 	  pkgsrc/ripd.sh pkgsrc/ripngd.sh pkgsrc/zebra.sh
@@ -2898,10 +2894,10 @@ compiler                : ${CC}
 compiler flags          : ${CFLAGS} ${WERROR} ${AC_CFLAGS} ${SAN_FLAGS}
 make                    : ${MAKE-make}
 linker flags            : ${LDFLAGS} ${SAN_FLAGS} ${LIBS} ${LIBCAP} ${LIBREADLINE} ${LIBM}
-state file directory    : ${CFG_STATE}
-config file directory   : ${CFG_SYSCONF}
-module directory        : ${CFG_MODULE}
-script directory        : ${CFG_SCRIPT}
+state file directory    : ${e_frr_runstatedir}
+config file directory   : ${e_sysconfdir}
+module directory        : ${e_moduledir}
+script directory        : ${e_scriptdir}
 user to run as          : ${enable_user}
 group to run as         : ${enable_group}
 group for vty sockets   : ${enable_vty_group}

lib/.gitignore

@@ -1,3 +1,4 @@
+/config_paths.h
 /version.c
 /version.h
 /gitversion.h

lib/command.c

@@ -43,6 +43,8 @@
 
 #include "frrscript.h"
 
+#include "lib/config_paths.h"
+
 DEFINE_MTYPE_STATIC(LIB, HOST, "Host config");
 DEFINE_MTYPE(LIB, COMPLETION, "Completion item");
 

lib/config_paths.h.in

@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/* autogenerated by configure / config.status */
+
+/* IF YOU ARE INCLUDING THIS FILE FROM A DAEMON OR ZEBRA, YOU ARE PROBABLY
+ * DOING SOMETHING WRONG.  Check for / add a library function that retrieves
+ * the path you need.
+ *
+ * Only libfrr and watchfrr should be including this file.
+ */
+
+/* the replacements for these are emitted by AX_SUBST_EXPANDED, which also
+ * adds the e_ prefix
+ */
+#define FRR_RUNSTATE_PATH	"@e_frr_runstatedir@"
+#define FRR_LIBSTATE_PATH	"@e_frr_libstatedir@"
+#define YANG_MODELS_PATH	"@e_yangmodelsdir@"
+#define MODULE_PATH		"@e_moduledir@"
+#define SCRIPT_PATH		"@e_scriptdir@"
+
+/* for extra footgunning, this one has a trailing slash */
+#define SYSCONFDIR		"@e_frr_sysconfdir@/"
+
+#define VTYSH_BIN_PATH		"@e_vtysh_bin@"
+#define WATCHFRR_SH_PATH	"@e_watchfrr_sh@"

lib/libfrr.c

@@ -37,6 +37,8 @@
 #include "frrscript.h"
 #include "systemd.h"
 
+#include "lib/config_paths.h"
+
 DEFINE_HOOK(frr_early_init, (struct event_loop * tm), (tm));
 DEFINE_HOOK(frr_late_init, (struct event_loop * tm), (tm));
 DEFINE_HOOK(frr_config_pre, (struct event_loop * tm), (tm));

lib/vty.c

@@ -46,6 +46,8 @@
 #include <arpa/telnet.h>
 #include <termios.h>
 
+#include "lib/config_paths.h"
+
 #include "lib/vty_clippy.c"
 
 DEFINE_MTYPE_STATIC(LIB, VTY, "VTY");

lib/yang.c

@@ -13,6 +13,8 @@
 #include "yang_translator.h"
 #include "northbound.h"
 
+#include "lib/config_paths.h"
+
 DEFINE_MTYPE_STATIC(LIB, YANG_MODULE, "YANG module");
 DEFINE_MTYPE_STATIC(LIB, YANG_DATA, "YANG data structure");
 

pkgsrc/bgpd.sh.in

@@ -16,7 +16,7 @@ fi
 
 name="bgpd"
 rcvar=$name
-required_files="@CFG_SYSCONF@/${name}.conf"
+required_files="@e_sysconfdir@/${name}.conf"
 command="@prefix@/sbin/${name}"
 command_args="-d"
 

pkgsrc/eigrpd.sh.in

@@ -16,7 +16,7 @@ fi
 
 name="eigrpd"
 rcvar=$name
-required_files="@CFG_SYSCONF@/${name}.conf"
+required_files="@e_sysconfdir@/${name}.conf"
 command="@prefix@/sbin/${name}"
 command_args="-d"
 

pkgsrc/mgmtd.sh.in

@@ -16,7 +16,7 @@ fi
 
 name="mgmtd"
 rcvar=$name
-required_files="@CFG_SYSCONF@/${name}.conf"
+required_files="@e_sysconfdir@/${name}.conf"
 command="@prefix@/sbin/${name}"
 command_args="-d"
 

pkgsrc/ospf6d.sh.in

@@ -16,7 +16,7 @@ fi
 
 name="ospf6d"
 rcvar=$name
-required_files="@CFG_SYSCONF@/${name}.conf"
+required_files="@e_sysconfdir@/${name}.conf"
 command="@prefix@/sbin/${name}"
 command_args="-d"
 

pkgsrc/ospfd.sh.in

@@ -16,7 +16,7 @@ fi
 
 name="ospfd"
 rcvar=$name
-required_files="@CFG_SYSCONF@/${name}.conf"
+required_files="@e_sysconfdir@/${name}.conf"
 command="@prefix@/sbin/${name}"
 command_args="-d"
 

pkgsrc/ripd.sh.in

@@ -16,7 +16,7 @@ fi
 
 name="ripd"
 rcvar=$name
-required_files="@CFG_SYSCONF@/${name}.conf"
+required_files="@e_sysconfdir@/${name}.conf"
 command="@prefix@/sbin/${name}"
 command_args="-d"
 

pkgsrc/ripngd.sh.in

@@ -16,7 +16,7 @@ fi
 
 name="ripngd"
 rcvar=$name
-required_files="@CFG_SYSCONF@/${name}.conf"
+required_files="@e_sysconfdir@/${name}.conf"
 command="@prefix@/sbin/${name}"
 command_args="-d"
 

pkgsrc/zebra.sh.in

@@ -16,7 +16,7 @@ fi
 
 name="zebra"
 rcvar=$name
-required_files="@CFG_SYSCONF@/${name}.conf"
+required_files="@e_sysconfdir@/${name}.conf"
 command="@prefix@/sbin/${name}"
 command_args="-d"
 

tools/frr.in

@@ -14,11 +14,11 @@
 #
 
 PATH=/bin:/usr/bin:/sbin:/usr/sbin
-D_PATH="@CFG_SBIN@" # /usr/lib/frr
-C_PATH="@CFG_SYSCONF@" # /etc/frr
-V_PATH="@CFG_STATE@" # /var/run/frr
-B_PATH="@CFG_BIN@"
-VTYSH="@vtysh_bin@" # /usr/bin/vtysh
+D_PATH="@e_sbindir@" # /usr/lib/frr
+C_PATH="@e_frr_sysconfdir@" # /etc/frr
+V_PATH="@e_frr_runstatedir@" # /var/run/frr
+B_PATH="@e_bindir@"
+VTYSH="@e_vtysh_bin@" # /usr/bin/vtysh
 FRR_USER="@enable_user@" # frr
 FRR_GROUP="@enable_group@" # frr
 FRR_VTY_GROUP="@enable_vty_group@" # frrvty

tools/frr.service.in

@@ -17,10 +17,10 @@ WatchdogSec=60s
 RestartSec=5
 Restart=always
 LimitNOFILE=1024
-PIDFile=@CFG_STATE@/watchfrr.pid
-ExecStart=@CFG_SBIN@/frrinit.sh start
-ExecStop=@CFG_SBIN@/frrinit.sh stop
-ExecReload=@CFG_SBIN@/frrinit.sh reload
+PIDFile=@e_frr_runstatedir@/watchfrr.pid
+ExecStart=@e_sbindir@/frrinit.sh start
+ExecStop=@e_sbindir@/frrinit.sh stop
+ExecReload=@e_sbindir@/frrinit.sh reload
 
 [Install]
 WantedBy=multi-user.target

tools/frr@.service.in

@@ -17,10 +17,10 @@ WatchdogSec=60s
 RestartSec=5
 Restart=always
 LimitNOFILE=1024
-PIDFile=@CFG_STATE@/%I/watchfrr.pid
-ExecStart=@CFG_SBIN@/frrinit.sh start %I
-ExecStop=@CFG_SBIN@/frrinit.sh stop %I
-ExecReload=@CFG_SBIN@/frrinit.sh reload %I
+PIDFile=@e_frr_runstatedir@/%I/watchfrr.pid
+ExecStart=@e_sbindir@/frrinit.sh start %I
+ExecStop=@e_sbindir@/frrinit.sh stop %I
+ExecReload=@e_sbindir@/frrinit.sh reload %I
 
 [Install]
 WantedBy=multi-user.target

tools/frrcommon.sh.in

@@ -14,18 +14,18 @@
 # not perform any action.  Note there is an "exit 1" if the main config
 # file does not exist.
 #
-# This script should be installed in  @CFG_SBIN@/frrcommon.sh
+# This script should be installed in  @e_sbindir@/frrcommon.sh
 
 # FRR_PATHSPACE is passed in from watchfrr
 suffix="${FRR_PATHSPACE:+/${FRR_PATHSPACE}}"
 nsopt="${FRR_PATHSPACE:+-N ${FRR_PATHSPACE}}"
 
 PATH=/bin:/usr/bin:/sbin:/usr/sbin
-D_PATH="@CFG_SBIN@" # /usr/lib/frr
-C_PATH="@CFG_SYSCONF@${suffix}" # /etc/frr
-V_PATH="@CFG_STATE@${suffix}" # /var/run/frr
-B_PATH="@CFG_BIN@"
-VTYSH="@vtysh_bin@" # /usr/bin/vtysh
+D_PATH="@e_sbindir@" # /usr/lib/frr
+C_PATH="@e_frr_sysconfdir@${suffix}" # /etc/frr
+V_PATH="@e_frr_runstatedir@${suffix}" # /var/run/frr
+B_PATH="@e_bindir@"
+VTYSH="@e_vtysh_bin@" # /usr/bin/vtysh
 FRR_USER="@enable_user@" # frr
 FRR_GROUP="@enable_group@" # frr
 FRR_VTY_GROUP="@enable_vty_group@" # frrvty

tools/frrinit.sh.in

@@ -37,7 +37,7 @@ self="`dirname $0`"
 if [ -r "$self/frrcommon.sh" ]; then
 	. "$self/frrcommon.sh"
 else
-	. "@CFG_SBIN@/frrcommon.sh"
+	. "@e_sbindir@/frrcommon.sh"
 fi
 
 case "$1" in

tools/watchfrr.sh.in

@@ -5,7 +5,7 @@
 # internally by watchfrr to start the protocol daemons with the appropriate
 # options.
 #
-# This script should be installed in  @CFG_SBIN@/watchfrr.sh
+# This script should be installed in  @e_sbindir@/watchfrr.sh
 
 log_success_msg() {
 	:
@@ -27,7 +27,7 @@ self="`dirname $0`"
 if [ -r "$self/frrcommon.sh" ]; then
 	. "$self/frrcommon.sh"
 else
-	. "@CFG_SBIN@/frrcommon.sh"
+	. "@e_sbindir@/frrcommon.sh"
 fi
 
 frrcommon_main "$@"

watchfrr/watchfrr.c

@@ -32,6 +32,8 @@
 #include "watchfrr.h"
 #include "watchfrr_errors.h"
 
+#include "lib/config_paths.h"
+
 #ifndef MIN
 #define MIN(X,Y) (((X) <= (Y)) ? (X) : (Y))
 #endif

watchfrr/watchfrr_vty.c

@@ -18,6 +18,8 @@
 
 #include "watchfrr.h"
 
+#include "lib/config_paths.h"
+
 pid_t integrated_write_pid;
 static int integrated_result_fd;