#!/bin/sh
#
#  This is automatically generated file. DO NOT MODIFY !
#
#  Firewall Builder  fwb_pf v5.0.0.3556
#
#  Generated Tue Jul  5 18:05:07 2011 PDT by vadim
#
# files: * firewall101.fw /etc/fw/pf.fw
# files:   firewall101.conf /etc/fw/path\ with\ space/pf.conf
#
# Compiled for pf 4.7
#
# routing rules, shell script format

# firewall101:Routing:1: error: Gateway and interface are both empty in the rule
# firewall101:Routing:1: error: Rules 0 (main) and 1 (main) define routes to the same destination 0.0.0.0/0.0.0.0 via different gateways. This configuration is not supported for freebsd
# firewall101:Routing:4: warning: Two of the routing commands created from the gui routing rules 3 (main) and 4 (main) are identical, skipping the second. Revise them to avoid this warning



FWDIR=`dirname $0`

IFCONFIG="/sbin/ifconfig"
PFCTL="/sbin/pfctl"
IPFW="/sbin/ipfw"
IPF="/sbin/ipf"
IPNAT="/sbin/ipnat"
SYSCTL="/sbin/sysctl"
LOGGER="/usr/bin/logger"

log() {
    echo "$1"
    command -v "$LOGGER" >/dev/null 2>&1 && $LOGGER -p info "$1"
}

diff_intf() {
    func=$1
    list1=$2
    list2=$3
    cmd=$4
    for intf in $list1
    do
        echo $list2 | grep -q $intf || {
        # $vlan is absent in list 2
            $func $intf $cmd
        }
    done
}


missing_address() {
    address=$1
    cmd=$2

    oldIFS=$IFS
    IFS="@"
    set $address
    addr=$1
    interface=$2
    IFS=$oldIFS

    if echo "$addr" | grep -q ':'
    then
        inet="inet6"
        addr=$(echo "$addr" | sed 's!/! prefixlen !')
    else
        inet="inet"
        addr=$(echo "$addr" | sed 's!/! netmask !')
    fi

    parameter=""
    test "$cmd" = "add" && {
      echo "# Adding ip address: $interface $addr"
      parameter="alias"
    }
    test "$cmd" = "del" && {
      echo "# Removing ip address: $interface $addr"
      parameter="delete"
    }

    $FWBDEBUG $IFCONFIG $interface $inet $addr $parameter || exit 1
    $FWBDEBUG $IFCONFIG $interface up
}

list_addresses_by_scope() {
    interface=$1
    scope=$2
    ignore_list=$3

    scope_regex="1"
    if test -n "$scope"; then scope_regex=" \$0 !~ \"$scope\" "; fi

    $IFCONFIG $interface | sed "s/%$interface//" | \
      awk -v IGNORED="$ignore_list" \
        "BEGIN {  
           split(IGNORED,ignored_arr);
           for (a in ignored_arr) {ignored_dict[ignored_arr[a]]=1;}
         }
         (/inet |inet6 / && $scope_regex && !(\$2 in ignored_dict)) {printf \"%s/%s\n\",\$2,\$4;}" | \
        while read addr; do
          echo "${addr}@$interface"
        done | sort
   
}

update_addresses_of_interface() {
    ignore_list=$2
    set $1 
    interface=$1 
    shift

    FWB_ADDRS=$(
      for addr in $*; do
        echo "${addr}@$interface"
      done | sort
    )

    CURRENT_ADDRS_ALL_SCOPES=""
    CURRENT_ADDRS_GLOBAL_SCOPE=""

    $IFCONFIG $interface >/dev/null 2>&1 && {
      CURRENT_ADDRS_ALL_SCOPES=$(list_addresses_by_scope $interface '' "$ignore_list")
      CURRENT_ADDRS_GLOBAL_SCOPE=$(list_addresses_by_scope $interface 'scopeid .*' "$ignore_list")
    } || {
      echo "# Interface $interface does not exist"
      # Stop the script if we are not in test mode
      test -z "$FWBDEBUG" && exit 1
    }


    echo "$interface" | grep -q carp && {
        diff_intf missing_address "$CURRENT_ADDRS_GLOBAL_SCOPE" "$FWB_ADDRS" del
        diff_intf missing_address "$FWB_ADDRS" "$CURRENT_ADDRS_ALL_SCOPES" add
    } || {
        diff_intf missing_address "$FWB_ADDRS" "$CURRENT_ADDRS_ALL_SCOPES" add
        diff_intf missing_address "$CURRENT_ADDRS_GLOBAL_SCOPE" "$FWB_ADDRS" del
    }
}

verify_interfaces() {
    :
    
}

set_kernel_vars() {
    :
    $SYSCTL -w net.inet.ip.forwarding=1
}

prolog_commands() {
    :
    
}

epilog_commands() {
    :
    
}

run_epilog_and_exit() {
    epilog_commands
    exit $1
}

configure_interfaces() {
    :
    update_addresses_of_interface "em0 10.3.14.81/0xffffff00" ""
    $IFCONFIG em0 mtu 1490 
    update_addresses_of_interface "em1 10.1.1.81/0xffffff00" ""
}

log "Activating firewall script generated Tue Jul  5 18:05:07 2011 by vadim"

set_kernel_vars
configure_interfaces
prolog_commands

$PFCTL    -f /etc/fw/path\ with\ space/pf.conf || exit 1





# ============== ROUTING RULES ============== 

TMPDIRNAME=`mktemp -d /tmp/.fwbuilder.XXXXXXXXXX` || exit 1
TMPFILENAME="$TMPDIRNAME/.fwbuilder.out"

#
# This function stops stdout redirection
# and sends previously saved output to terminal
restore_script_output()
{
  exec 1>&3 2>&1
  cat $TMPFILENAME
  rm -rf $TMPDIRNAME
}

# if any routing rule fails we do our best to prevent freezing the firewall
route_command_error()
{
  echo "Error: Routing rule $1 couldn't be activated"
  echo "Recovering previous routing configuration..."
  # delete current routing rules
  netstat -rn -f inet | awk '$3 ~ /S/ && $NF !~ /lo0/ { print $0;}' | \
      while read route gw rest; do route delete $route $gw; done
  # restore old routing rules
  (IFS="
"; for route_cmd in $oldRoutes; do (IFS=' '; $route_cmd); done)
  echo "...done"
  restore_script_output
  epilog_commands
  exit 1
}

# redirect output to prevent ssh session from stalling
exec 3>&1
exec 1> $TMPFILENAME
exec 2>&1

oldRoutes=$(netstat -rn -f inet |  awk '/^$|Destination|Routing tables|Internet:/ {next;} {printf "route add %s %s\n",$1,$2;}')

echo "Deleting routing rules previously set by user space processes..."
netstat -rn -f inet | awk '$3 ~ /S/ { print $0;}' | grep -Ev 'lo0' | \
    while read route gw rest; do route delete $route $gw; done
    
echo "Activating routing rules..."
# 
# Rule 0 (main)
# 
echo "Routing rule 0 (main)"
# 
# setting default via gateway
# line 2 comment
#
route add default 10.1.1.1 || route_command_error "0 (main)"

# 
# Rule 1 (main)
# 
echo "Routing rule 1 (main)"
# 
# empty rule
#
# firewall101:Routing:1: error: Gateway and interface are both empty in the rule
# firewall101:Routing:1: error: Rules 0 (main) and 1 (main) define routes to the same destination 0.0.0.0/0.0.0.0 via different gateways. This configuration is not supported for freebsd

route add default || route_command_error "1 (main)"

# 
# Rule 2 (main)
# 
echo "Routing rule 2 (main)"
# 
route add 192.168.171.2 10.1.1.1 || route_command_error "2 (main)"

# 
# Rule 3 (main)
# 
echo "Routing rule 3 (main)"
# 
route add 22.22.22.0/24 10.1.1.1 || route_command_error "3 (main)"

# 
# Rule 4 (main)
# 
echo "Routing rule 4 (main)"
# 
# firewall101:Routing:4: warning: Two of the routing commands created from the gui routing rules 3 (main) and 4 (main) are identical, skipping the second. Revise them to avoid this warning

route add 33.33.33.0/24 10.1.1.1 || route_command_error "4 (main)"


restore_script_output
echo "...done."

epilog_commands