#!/bin/sh 
#
#  This is automatically generated file. DO NOT MODIFY !
#
#  Firewall Builder  fwb_ipt v5.0.0.3547
#
#  Generated Fri Jun  3 17:28:22 2011 PDT by vadim
#
# files: * firewall42.fw /etc/fw/firewall42.fw
#
# Compiled for iptables (any version)
#
# simple test for a rule that matches local broadcast and should go into INPUT chain, but internal interface of the firewall is dynamic so compiler can not determine that given address is broadcast. Using fake interface to make this address match.




FWBDEBUG=""

PATH="/sbin:/usr/sbin:/bin:/usr/bin:${PATH}"
export PATH



LSMOD="/sbin/lsmod"
MODPROBE="/sbin/modprobe"
IPTABLES="/sbin/iptables"
IP6TABLES="/sbin/ip6tables"
IPTABLES_RESTORE="/sbin/iptables-restore"
IP6TABLES_RESTORE="/sbin/ip6tables-restore"
IP="/sbin/ip"
IFCONFIG="/sbin/ifconfig"
VCONFIG="/sbin/vconfig"
BRCTL="/sbin/brctl"
IFENSLAVE="/sbin/ifenslave"
IPSET="/usr/sbin/ipset"
LOGGER="/usr/bin/logger"

log() {
    echo "$1"
    command -v "$LOGGER" >/dev/null 2>&1 && $LOGGER -p info "$1"
}

getInterfaceVarName() {
    echo $1 | sed 's/\./_/'
}

getaddr_internal() {
    dev=$1
    name=$2
    af=$3
    L=$($IP $af addr show dev $dev |  sed -n '/inet/{s!.*inet6* !!;s!/.*!!p}' | sed 's/peer.*//')
    test -z "$L" && { 
        eval "$name=''"
        return
    }
    eval "${name}_list=\"$L\"" 
}

getnet_internal() {
    dev=$1
    name=$2
    af=$3
    L=$($IP route list proto kernel | grep $dev | grep -v default |  sed 's! .*$!!')
    test -z "$L" && { 
        eval "$name=''"
        return
    }
    eval "${name}_list=\"$L\"" 
}


getaddr() {
    getaddr_internal $1 $2 "-4"
}

getaddr6() {
    getaddr_internal $1 $2 "-6"
}

getnet() {
    getnet_internal $1 $2 "-4"
}

getnet6() {
    getnet_internal $1 $2 "-6"
}

# function getinterfaces is used to process wildcard interfaces
getinterfaces() {
    NAME=$1
    $IP link show | grep ": $NAME" | while read L; do
        OIFS=$IFS
        IFS=" :"
        set $L
        IFS=$OIFS
        echo $2
    done
}

diff_intf() {
    func=$1
    list1=$2
    list2=$3
    cmd=$4
    for intf in $list1
    do
        echo $list2 | grep -q $intf || {
        # $vlan is absent in list 2
            $func $intf $cmd
        }
    done
}

find_program() {
  PGM=$1
  command -v $PGM >/dev/null 2>&1 || {
    echo "$PGM not found"
    exit 1
  }
}
check_tools() {
  find_program $IPTABLES 
  find_program $IP 
}
reset_iptables_v4() {
  $IPTABLES -P OUTPUT  DROP
  $IPTABLES -P INPUT   DROP
  $IPTABLES -P FORWARD DROP

cat /proc/net/ip_tables_names | while read table; do
  $IPTABLES -t $table -L -n | while read c chain rest; do
      if test "X$c" = "XChain" ; then
        $IPTABLES -t $table -F $chain
      fi
  done
  $IPTABLES -t $table -X
done
}

reset_iptables_v6() {
  $IP6TABLES -P OUTPUT  DROP
  $IP6TABLES -P INPUT   DROP
  $IP6TABLES -P FORWARD DROP

cat /proc/net/ip6_tables_names | while read table; do
  $IP6TABLES -t $table -L -n | while read c chain rest; do
      if test "X$c" = "XChain" ; then
        $IP6TABLES -t $table -F $chain
      fi
  done
  $IP6TABLES -t $table -X
done
}


P2P_INTERFACE_WARNING=""

missing_address() {
    address=$1
    cmd=$2

    oldIFS=$IFS
    IFS="@"
    set $address
    addr=$1
    interface=$2
    IFS=$oldIFS



    $IP addr show dev $interface | grep -q POINTOPOINT && {
        test -z "$P2P_INTERFACE_WARNING" && echo "Warning: Can not update address of interface $interface. fwbuilder can not manage addresses of point-to-point interfaces yet"
        P2P_INTERFACE_WARNING="yes"
        return
    }

    test "$cmd" = "add" && {
      echo "# Adding ip address: $interface $addr"
      echo $addr | grep -q ':' && {
          $FWBDEBUG $IP addr $cmd $addr dev $interface
      } || {
          $FWBDEBUG $IP addr $cmd $addr broadcast + dev $interface
      }
    }

    test "$cmd" = "del" && {
      echo "# Removing ip address: $interface $addr"
      $FWBDEBUG $IP addr $cmd $addr dev $interface || exit 1
    }

    $FWBDEBUG $IP link set $interface up
}

list_addresses_by_scope() {
    interface=$1
    scope=$2
    ignore_list=$3
    $IP addr ls dev $interface | \
      awk -v IGNORED="$ignore_list" -v SCOPE="$scope" \
        'BEGIN {
           split(IGNORED,ignored_arr);
           for (a in ignored_arr) {ignored_dict[ignored_arr[a]]=1;}
         }
         (/inet |inet6 / && $0 ~ SCOPE && !($2 in ignored_dict)) {print $2;}' | \
        while read addr; do
          echo "${addr}@$interface"
	done | sort
}


update_addresses_of_interface() {
    ignore_list=$2
    set $1 
    interface=$1 
    shift

    FWB_ADDRS=$(
      for addr in $*; do
        echo "${addr}@$interface"
      done | sort
    )

    CURRENT_ADDRS_ALL_SCOPES=""
    CURRENT_ADDRS_GLOBAL_SCOPE=""

    $IP link show dev $interface >/dev/null 2>&1 && {
      CURRENT_ADDRS_ALL_SCOPES=$(list_addresses_by_scope $interface 'scope .*' "$ignore_list")
      CURRENT_ADDRS_GLOBAL_SCOPE=$(list_addresses_by_scope $interface 'scope global' "$ignore_list")
    } || {
      echo "# Interface $interface does not exist"
      # Stop the script if we are not in test mode
      test -z "$FWBDEBUG" && exit 1
    }

    diff_intf missing_address "$FWB_ADDRS" "$CURRENT_ADDRS_ALL_SCOPES" add
    diff_intf missing_address "$CURRENT_ADDRS_GLOBAL_SCOPE" "$FWB_ADDRS" del
}

clear_addresses_except_known_interfaces() {
    $IP link show | sed 's/://g' | awk -v IGNORED="$*" \
        'BEGIN {
           split(IGNORED,ignored_arr);
           for (a in ignored_arr) {ignored_dict[ignored_arr[a]]=1;}
         }
         (/state/ && !($2 in ignored_dict)) {print $2;}' | \
         while read intf; do
            echo "# Removing addresses not configured in fwbuilder from interface $intf"
            $FWBDEBUG $IP addr flush dev $intf scope global
            $FWBDEBUG $IP link set $intf down
         done
}

check_file() {
    test -r "$2" || {
        echo "Can not find file $2 referenced by address table object $1"
        exit 1
    }
}

check_run_time_address_table_files() {
    :
    
}

load_modules() {
    :
    
}

verify_interfaces() {
    :
    
}

prolog_commands() {
    echo "Running prolog script"
    
}

epilog_commands() {
    echo "Running epilog script"
    
}

run_epilog_and_exit() {
    epilog_commands
    exit $1
}

configure_interfaces() {
    :
    # Configure interfaces
    getaddr eth0  i_eth0
    getaddr6 eth0  i_eth0_v6
    getnet eth0  i_eth0_network
    getnet6 eth0  i_eth0_v6_network
}

script_body() {
    echo 30 > /proc/sys/net/ipv4/tcp_fin_timeout 
     echo 1800 > /proc/sys/net/ipv4/tcp_keepalive_intvl 


    # ================ IPv4


    # ================ Table 'filter', automatic rules
    # accept established sessions
    $IPTABLES -A INPUT   -m state --state ESTABLISHED,RELATED -j ACCEPT 
    $IPTABLES -A OUTPUT  -m state --state ESTABLISHED,RELATED -j ACCEPT 
    $IPTABLES -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT






    # ================ Table 'filter', rule set Policy
    # 
    # Rule 0 (eth0)
    # 
    echo "Rule 0 (eth0)"
    # 
    $IPTABLES -A INPUT -i eth0  -p udp -m udp  -d 192.168.1.255   --dport 67  -m state --state NEW  -j ACCEPT
    # 
    # Rule 1 (eth0)
    # 
    echo "Rule 1 (eth0)"
    # 
    $IPTABLES -A INPUT -i eth0  -p udp -m udp  -d 255.255.255.255   --dport 67  -m state --state NEW  -j ACCEPT
    # 
    # Rule 2 (eth0)
    # 
    echo "Rule 2 (eth0)"
    # 
    $IPTABLES -A INPUT -i eth0  -p udp -m udp  -d 224.0.1.141   --dport 67  -m state --state NEW  -j ACCEPT
    # 
    # Rule 3 (eth0)
    # 
    echo "Rule 3 (eth0)"
    # 
    $IPTABLES -A INPUT -i eth0  -p udp -m udp  -s 0.0.0.0   -d 255.255.255.255   --dport 67  -m state --state NEW  -j ACCEPT
    # 
    # Rule 4 (eth0)
    # 
    echo "Rule 4 (eth0)"
    # 
    for i_eth0 in $i_eth0_list
    do
    test -n "$i_eth0" && $IPTABLES -A OUTPUT -o eth0  -p udp -m udp  -s $i_eth0   -d 255.255.255.255   --dport 68  -m state --state NEW  -j ACCEPT 
    done
}

ip_forward() {
    :
    
}

reset_all() {
    :
    reset_iptables_v4
}

block_action() {
    reset_all
}

stop_action() {
    reset_all
    $IPTABLES -P OUTPUT  ACCEPT
    $IPTABLES -P INPUT   ACCEPT
    $IPTABLES -P FORWARD ACCEPT
}

check_iptables() {
    IP_TABLES="$1"
    [ ! -e $IP_TABLES ] && return 151
    NF_TABLES=$(cat $IP_TABLES 2>/dev/null)
    [ -z "$NF_TABLES" ] && return 152
    return 0
}
status_action() {
    check_iptables "/proc/net/ip_tables_names"
    ret_ipv4=$?
    check_iptables "/proc/net/ip6_tables_names"
    ret_ipv6=$?
    [ $ret_ipv4 -eq 0 -o $ret_ipv6 -eq 0 ] && return 0
    [ $ret_ipv4 -eq 151 -o $ret_ipv6 -eq 151 ] && {
        echo "iptables modules are not loaded"
    }
    [ $ret_ipv4 -eq 152 -o $ret_ipv6 -eq 152 ] && {
        echo "Firewall is not configured"
    }
    exit 3
}

# See how we were called.
# For backwards compatibility missing argument is equivalent to 'start'

cmd=$1
test -z "$cmd" && {
    cmd="start"
}

case "$cmd" in
    start)
        log "Activating firewall script generated Fri Jun  3 17:28:22 2011 by vadim"
        check_tools
         prolog_commands 
        check_run_time_address_table_files
        
        load_modules " "
        configure_interfaces
        verify_interfaces
        
         reset_all 
        
        script_body
        ip_forward
        epilog_commands
        RETVAL=$?
        ;;

    stop)
        stop_action
        RETVAL=$?
        ;;

    status)
        status_action
        RETVAL=$?
        ;;

    block)
        block_action
        RETVAL=$?
        ;;

    reload)
        $0 stop
        $0 start
        RETVAL=$?
        ;;

    interfaces)
        configure_interfaces
        RETVAL=$?
        ;;

    test_interfaces)
        FWBDEBUG="echo"
        configure_interfaces
        RETVAL=$?
        ;;



    *)
        echo "Usage $0 [start|stop|status|block|reload|interfaces|test_interfaces]"
        ;;

esac

exit $RETVAL