dev-python/pymodbus: add 3.7.4

Closes: #4388
Signed-off-by: Andreas Billmeier <b@edevau.net>

DOMAINTABLE.md

@@ -11,6 +11,7 @@
 |aemet| AEMET OpenData meteorological data|N|N|Y|2021.3|
 |aftership|The aftership platform allows one to track deliveries by AfterShip|N|Y|Y|0.85|
 |agent_dvr|Agent DVR is a free* software DVR solution|N|Y|Y|0.110|
+|airgradient|The AirGradient integration will fetch data from your AirGradient devices|N|N|Y|2024.6.0b4|
 |airly|Uses the Airly web service as a source for air quality data|Y|Y|Y||
 |airnow|AirNow web service as a source for air quality data|N|N|Y|2021.2|
 |airq|integrating the sensors provided by your air-Q device|N|N|Y|2022.12.0|
@@ -39,6 +40,7 @@
 |android_ip_webcam|The android_ip_webcam integration turns any Android phone or tablet into a netwo|Y|Y|Y|0.40|
 |anova|allows you to control Anova sous vides with Wi-Fi capability|N|N|Y|2023.5.2|
 |anthemav|Both Anthem’s current and last generation of A/V Receivers and Processors suppor|N|Y|Y|0.37|
+|anthropic|adds a conversation agent powered by Anthropic|N|N|Y|2024.9.2|
 |aosmith|control a compatible A. O. Smith iCOMM-enabled water heater from Home Assistant|N|N|Y|2024.1.0b7|
 |apache_kafka|Sends all state changes from Home Assistant to a Apache Kafka topic|N|Y|Y|0.97|
 |apcupsd|Query Apcupsd status information from Home Assistant|N|Y|Y|0.13|
@@ -47,6 +49,8 @@
 |apprise|The Apprise service is an all-in-one solution to open up Home Assistant|N|Y|Y|0.101|
 |aprilaire|The Aprilaire integration allows you to control an Aprilaire thermostat|N|N|Y|2024.3.0|
 |aprs|Tracker integration connects to the APRS-IS|N|N|Y|0.95|
+|apsystems|allows you to read the data from your APsystems EZ1 microinverter|N|N|Y|2024.6.0b4|
+|aquacell|monitor your AquaCell device in Home Assistant|N|N|Y|2024.9.2|
 |aqualogic|Provides connectivity to a Hayward/Goldline AquaLogic/ProLogic pool controller|N|N|Y|0.80|
 |aquostv|The aquostv platform allows you to control a Sharp Aquos TV|N|Y|Y|0.35|
 |aranet|Integrates Aranet devices into Home Assistant|N|N|Y|2022.12.0|
@@ -66,11 +70,13 @@
 |aurora|The aurora platform uses the NOAA Aurora Forecast service to let you know if an |N|N|Y|0.39|
 |aurora_abb_powerone|This implements a direct RS485 connection to a solar inverter in the PVI-3.0/3.6|N|Y|Y|0.96|
 |aussie_broadband|displays various service metrics using the Aussie Broadband API|N|N|Y|2022.2.0b1|
+|autarco|gather data from the cloud API of Autarco|N|N|Y|2024.9.2|
 |avea|Library for Elgato Avea bulbs|N|Y|Y|0.97|
 |avion|Support for the Avi-on Bluetooth dimmer switch Avi-on|N|Y|Y|0.37|
 |awair|Library to integrate the Awair GraphQL API into Home Assistant|N|Y|Y|0.84|
 |aws|Interact with Amazon Web Services|N|N|Y|0.91|
 |axis|Communicating with newer devices from Axis Communications|Y|Y|Y||
+|azure_data_explorer|allows you to forward events to Azure Data Explorer|N|N|Y|2024.6.0b4|
 |backup|allows you to create and download backups for your Home Assistant Core|Y|Y|Y|2022.4.0b0|
 |baf|Integrates Big Ass Fans devices into Home Assistant|N|N|Y|2022.6.0b0|
 |baidu|Text-to-speech platform uses Baidu TTS engine to read a text with natural soundi|N|Y|Y|0.59|
@@ -105,16 +111,19 @@
 |broadlink|Allows you to interact with Broadlink remote control devices|N|Y|Y|0.35|
 |brottsplatskartan|brottsplatskartan sensor allows one to track reported incidents|N|Y|Y|0.85|
 |brunt|The brunt platform allows one to control Blind Engines by Brunt|N|Y|Y|0.75|
+|bryant_evolution|lets you control Bryant Evolution HVAC systems|N|N|Y|2024.9.2|
 |bsblan|This integration integrates BSBLan device into Home Assistant|N|Y|Y||
 |bthome|Integrates BTHome BLE devices into Home Assistant|N|N|Y|2022.9.0b3|
 |bt_home_hub_5|Offers presence detection by looking at connected devices to a BT Home |N|Y|Y|0.22|
 |bt_smarthub|Presence detection by looking at BT Smart Hub based routers|N|Y|Y|0.82|
 |buienradar|Integrate buienradar weather data into Home Assistant|N|Y|Y|0.47|
 |caldav|Integrate a CalDAV (RFC4791) calendar in Home Assistant|Y|Y|Y|0.60|
+|cambridge_audio|control all receivers and streamers that support the StreamMagic app|N|N|Y|2024.10.1|
 |camera|The camera integration allows you to use IP cameras with Home Assistant|Y|Y|Y||
 |canary|Allows you to integrate your Canary devices from Home Assistant|N|Y|Y|0.60|
 |cast|Let Home Assitant talk to Google Chromecast|Y|Y|Y||
 |ccm15|integrate Midea CCM15 devices in Home Assistant.|N|N|Y|2024.1.0b7|
+|chacon_dio|connected home devices that can be controlled via RF 433 MHz or Wi-Fi|N|N|Y|2024.9.2|
 |channels|Allows you to control Channels from Home Assistant|N|N|Y|0.65|
 |circuit|Unify Circuit platform allows you to send notifications|N|N|Y|0.111|
 |cisco_ios|Presence detection scanner for Cisco IOS devices|N|N|Y|0.33|
@@ -142,6 +151,7 @@
 |daikin|Integrate Daikin wireless controllers into Home Assistant|N|Y|Y|0.59|
 |danfoss_air|The danfoss_air integration accesses information from your Danfoss Air HRV unit|N|N|Y|0.87|
 |datadog|The datadog integration sends all state changes to Datadog using a Datadog Agent|N|N|Y|0.45|
+|deako|control your Deako devices from Home Assistant|N|N|Y|2024.10.1|
 |debugpy|Useful in testing changes on a local development install|N|N|Y||
 |deconz|Add deCONZ ConBee/RaspBee Zigbee gateways to Home Assistant|N|Y|Y||
 |decora|Support Decora Bluetooth dimmer switch Leviton from Home Assistant|N|N|Y|0.37|
@@ -177,6 +187,7 @@
 |dremel_3d_printer|monitor your Dremel 3D printer and its progress with your Home Assistant|N|N|Y|2023.7.2|
 |drop_connect|provides connectivity with DROP smart water system devices via a local MQTT API|N|N|Y|2024.1.0b7|
 |dsmr|Dutch Smart Meters which comply to DSMR (Dutch Smart Meter Requirements)|N|N|Y||
+|duke_energy|get energy information from Duke Energy|N|N|Y|2024.10.1|
 |dunehd|control a Dune HD media player|N|Y|Y|0.34|
 |duotecno|used to control Duotecno nodes in Home Assistant|N|N|Y|2023.10.1|
 |dwd_weather_warnings|dwd_weather_warnings sensor platform uses DWD for  warnings|Y|Y|Y|0.51|
@@ -201,6 +212,7 @@
 |egardia|Control an Egardia/Woonveilig alarm control panel from Home Assistant|N|N|Y|0.65|
 |electrasmart|control Electra Air Ait COnditioners with HA|N|N|Y|2023.7.2|
 |electric_kiwi|uses the official Electric Kiwi API to show and select the hour of free power|N|N|Y|2023.10.1|
+|elevenlabs|support for ElevenLabs as text-to-speech with natural sounding voices|N|N|Y|2024.9.2|
 |elgato|The Elgato Key Light sets the bar for high-end studio lighting|N|N|Y||
 |eliqonline|Integrate your ELIQ Online smart meter information|N|N|Y|0.10|
 |elkm1|Elk-M1 is a home security and automation controller|N|N|Y|0.81|
@@ -277,6 +289,7 @@
 |fritzbox_callmonitor|monitors the call monitor exposed by AVM FRITZ!Box routers on TCP port 1012|N|Y|Y||
 |fronius|Add (very basic) Support for Fronius Symo JSON Api to Home Assistant|Y|Y|Y|0.96|
 |frontier_silicon|Support for Internet Radios based on the Frontier Silicon chipset|N|N|Y|0.40|
+|fujitsu_fglair|provides support for Fujitsu heat pumps and air conditioners|N|N|Y|2024.9.2|
 |fully_kiosk|Fully Kiosk Browser control in Home Assistant|N|N|Y|2022.9.0b3|
 |futurenow|Allows you to use P5 FutureNow relay/dimmer units as lights|N|N|Y|0.75|
 |fyta|uses the open API of FYTA to obtain the data from your plant sensors|N|N|Y|2024.4.0b3|
@@ -298,6 +311,7 @@
 |gitter|Sensor allows one to monitor a Gitter.im chatroom for unread messages|N|N|Y|0.47|
 |glances|Allows you to monitor the system information provided by the Glances API|Y|Y|Y|0.7.3|
 |gntp|Growl Notification Protocol: sending and receiving notifications|N|N|Y||
+|go2rtc|connects to a go2rtc instance and provides a WebRTC prox|N|N|Y|2024.11.0b0|
 |goalfeed|Use your Goalfeed account to trigger events in Home Assistant|N|N|Y||
 |goalzero|Access Goal Zero REST Api from Home Assistant|N|N|Y||
 |gogogate2|Control Gogogate2-Enabled garage doors from Home Assistant|N|Y|Y|0.67|
@@ -308,6 +322,7 @@
 |google_generative_ai_conversation|adds a conversation agent powered by Google Generative AI in Home Assistant|N|N|Y|2023.7.2|
 |google_mail|allows you to connect your Google Mail and set an email auto-response|N|N|Y|2023.2.1|
 |google_maps|google_maps platform allows you to detect presence|N|N|Y|0.67|
+|google_photos|upload photos to your Google Photos using Home Assistant|N|N|Y|2024.10.1|
 |google_pubsub|Send events to Google Cloud Pub/Sub from Home Assistant|N|N|Y|0.88|
 |google_sheets|allows you to connect your Google Drive to Home Assistant|N|N|Y|2022.10.0|
 |google_tasks|allows you to connect your Google Tasks to Home Assistant|N|N|Y|2023.11.0b2|
@@ -358,6 +373,7 @@
 |huisbaasje|Huisbaasje smart energy meters|N|N|Y|2021.2|
 |hunterdouglas_powerview|integrate your Hunter Douglas PowerView devices|N|N|Y|0.15|
 |husqvarna_automower|integration provides connectivity with Husqvarna Automowers lawn mowers|N|N|Y|2024.3.0|
+|husqvarna_automower_ble|Husqvarna Automowers lawn mowers via a local Bluetooth connection|N|N|Y|2024.11.0b0|
 |huum|Integrates Huum saunas into Home Assistant|N|N|Y|2024.2.1|
 |hvv_departures|departures of busses, trains and ferries in Hamburg|N|N|Y|0.112|
 |hydrawise|communicate with Hunter Wi-Fi irrigation controllers|N|Y|Y|0.71|
@@ -377,6 +393,7 @@
 |image|handle image assets in Home Assistant|N|N|Y||
 |image_upload|handle image assets in Home Assistant|N|Y|Y|2023.1.1|
 |imap|observing your IMAP server and reporting the amount of unread emails|N|Y|Y|0.25|
+|imgw_pib|hydrological data from Institute of Meteorology and Water Management - Poland|N|N|Y|2024.6.0b4|
 |improv_ble|allows connecting devices implementing Improv via BLE to Wi-Fi|N|N|Y|2023.11.0b2|
 |incomfort|client for Intergas InComfort/InTouch Lan2RF systems|N|Y|Y|0.93|
 |influxdb|transfer sensor data to a local InfluxDB database|Y|Y|Y|0.9|
@@ -386,13 +403,19 @@
 |intesishome|communications with IntesisHome Smart AC Controllers|N|Y|Y|0.104|
 |iota|IOTA is a new blockless distributed ledger|N|N|Y||
 |iotawatt|Integration for the IoTaWatt Open WiFi Electricity Monitor|N|N|Y|2021.9.0b6|
+|iotty|integrate iotty devices into Home Assistant|N|N|Y|2024.9.2|
 |iperf3|iperf3 sensor integration allows you to measure network bandwidth|N|N|Y|0.71|
 |ipma|ipma weather platform|N|Y|Y|0.72|
 |ipp|read current data from your networked printer|N|Y|Y|0.108|
 |iqvia|collects allergy, asthma and disease information (based on a U.S. ZIP code)|N|N|Y||
 |irish_rail_transport|will give you the time until the next two departures|N|N|Y|0.57|
+|iron_os|connects Home Assistant with PINE64’s Pinecil V2 soldering irons|N|N|Y|2024.9.2|
+|isal|Intelligent Storage Acceleration, is used for accelerating aiohttp|Y|Y|Y|2024.6.0b4|
+|iskra|connect Iskra energy meters and power quality analyzers to Home Assistant|N|N|Y|2024.10.1|
 |islamic_prayer_times|integration displays the various prayer times for Muslims as sensors|N|Y|Y|0.85|
+|israel_rail|give you the next three departure times from Israel rail|N|N|Y|2024.9.2|
 |iss|know if the station is above your home location|N|N|Y||
+|ista_ecotrend|import your monthly meter readings from the ista EcoTrend service|N|N|Y|2024.9.2|
 |isy994|controller that is capable of controlling Insteon and X10 devices|N|N|Y||
 |itach|control IR devices with a Global Caché iTach Device and GC-100 devices|N|N|Y|0.39|
 |izone|control of a local iZone ducted reverse-cycle climate control device|N|N|Y|0.100|
@@ -414,6 +437,7 @@
 |kira|main integration to integrate Keene Electronics IR over IP Kira modules|N|N|Y|0.45|
 |kiwi|open your KIWI Smart Locks and Smart Entry Devices|N|N|Y|0.72|
 |kmtronic|IP-connected relays|N|N|Y|2021.3|
+|knocki|receive events for the triggers set up from your Knocki devices|N|N|Y|2024.9.2|
 |knx|Asynchronous Library for the KNX protocol|Y|Y|Y||
 |kodi|control a Kodi multimedia system|Y|Y|Y||
 |konnected|connect wired sensors and switches to a Konnected Alarm Panel|N|N|Y|0.70|
@@ -433,8 +457,10 @@
 |ld2410_ble|Integrates LD2410 BLE sensors from Hi-Link|N|N|Y|2023.2.1|
 |leaone|Integrates LeaOne health devices into Home Assistant|N|N|Y|2024.2.1|
 |led_ble|Integrates multiple brands of Bluetooth Low Energy LED devices into Home Assista|N|N|Y|2022.9.0b3|
+|lektrico|ntegration integrates your Lektrico Charging Station|N|N|Y|2024.10.1|
 |lg_netcast|allows you to control a LG Smart TV running NetCast 3.0|N|N|Y|0.20|
 |lg_soundbar|allows you to control LG Soundbars from Home Assistant|N|N|Y|0.81|
+|lg_thinq|connect LG ThinQ devices to Home Assistant|N|N|Y|2024.11.0b0|
 |lidarr|The Lidarr integration pulls data from a given Lidarr instance|N|N|Y|2022.10.0|
 |life360|detect presence using the unofficial API of Life360|N|N|Y|0.95|
 |lifx|The lifx integration allows you to integrate your LIFX into Home Assistant|N|Y|Y|0.81|
@@ -442,6 +468,7 @@
 |lightwave|WiFi link for controlling Lightwave lights, switches and TRVs|N|N|Y|0.84|
 |limitlessled|control your LimitlessLED lights from within Home Assistant|N|N|Y||
 |linear_garage_door|lets you control Linear garage doors through Home Assistant|N|N|Y|2023.12.1|
+|linkplay|control various media players based on the LinkPlay protocol|N|N|Y|2024.9.2|
 |linode|allows you to access the information about your Linode systems|N|Y|Y|0.57|
 |linux_battery|sensor platform is using the information stored in /sys/class/power_supply/|N|N|Y|0.28|
 |litejet|allows a computer to control the system via LiteJet’s third party protocol|N|N|Y||
@@ -462,6 +489,7 @@
 |lw12wifi|Library to control the Lagute LW-12 WiFi LED controller|N|N|Y|0.71|
 |lyft|Unofficial Lyft Rides API Python SDK|N|N|Y||
 |lyric|Honeywell Lyric thermostat platform|N|N|Y|2021.3|
+|madvr|automation and control of madVR Envy devices|N|N|Y|2024.9.2|
 |magicseaweed|Provides API wrapper to magicseaweed.com.|N|N|Y||
 |mailgun|A simple mailgun client - pymailgun fork with Python 3 support|N|N|Y|0.38|
 |mariadb|WIP: set dependencies for mariadb-connector-python|Y|Y|Y|2022.6.3|
@@ -471,6 +499,7 @@
 |matter|control Matter devices on your local WiFi or Thread network|Y|Y|Y|2022.12.0|
 |maxcube|eQ-3 ELV MAX Cube Python API|Y|Y|Y|0.40|
 |mcp23017|base for all related mcp23017 platforms in Home Assistant|N|N|Y||
+|mealie|The Mealie integration will fetch data from your Mealie instance|N|N|Y|2024.9.2|
 |meater|communication with the Meater Temperature Probe from Apption Labs|N|N|Y|2022.5.0b0|
 |medcom_ble|International Medcom Bluetooth-enabled radiation monitors|N|N|Y|2023.10.1|
 |mediaroom|control a Mediaroom Set-Top Box (STB) from Home Assistant|N|N|Y|0.63|
@@ -500,7 +529,9 @@
 |modem_callerid|Uses an available modem for collecting caller ID information|N|N|Y||
 |modern_forms|Asynchronous Python client for Modern Forms fans|N|N|Y|2021.7|
 |moehlenhoff_alpha2|allows you to control a Möhlenhoff Alpha 2 temperature control system|N|N|Y|2022.3.0b3|
+|monarch_money|a personal finance aggregation and budgeting service|N|N|Y|2024.10.1|
 |monoprice|Python API for talking to Monoprice 6-zone amplifier|N|N|Y|0.56|
+|monzo|allows you to connect your Monzo bank accounts to Home Assistant|N|N|Y|2024.6.0b4|
 |mopeka|Integrates Mopeka devices into Home Assistant|N|N|Y|2023.2.1|
 |mosquitto|Set a runtime dependency for Mosquitto MQTT broker|Y|Y|Y|2022.8.3|
 |motionblinds_ble|adds support for Motionblinds Bluetooth motors|N|N|Y|2024.4.0b3|
@@ -511,6 +542,7 @@
 |mqtt|install MQTT Broker and dependencies|Y|Y|Y||
 |msteams|send notifications from Home Assistant to a team channel in Microsoft Teams|N|N|Y|0.101|
 |mullvad|Mullvad VPN integration pulls Mullvad VPN status information|N|N|Y|2021.3|
+|music_assistant|connect Home Assistant to a Music Assistant Server|N|N|Y|2024.11.0b0|
 |mutesync|mutesync integration for Home Assistant connects to the mütesync virtual button|N|N|Y|2021.5|
 |mvglive|departure times bus, tram, subway, train of Munich public transport network|N|N|Y|0.42|
 |mychevy|communicates with the my.chevrolet website using the javascript API|N|N|Y||
@@ -542,6 +574,7 @@
 |nextdns|allows you to monitor NextDNS statistics|N|N|Y|2022.8.1|
 |nfandroidtv|Notifications for Android TV and Notifications for Fire TV|Y|Y|Y||
 |nibe_heatpump|control and monitor Nibe Heat Pumps in Home Assistant|N|N|Y|2022.10.0|
+|nice_go|control Nice G.O. garage doors through Home Assistant|N|N|Y|2024.9.2|
 |nightscout|allows you to view your CGM data from Nightscout|N|N|Y|0.115|
 |niko_home_control|platform allows you to integrate your Niko Home Control|N|N|Y|0.82|
 |nilu|An API client for getting pollution data from NILU sensor stations in Norway|N|N|Y|0.87|
@@ -562,6 +595,7 @@
 |nut|monitor a UPS (battery backup) by using data from a NUT (Network UPS Tools)|N|Y|Y||
 |nws|uses the National Weather Service web API|N|Y|Y|0.99|
 |nx584|NX584/NX8E Interface Library and Server|N|Y|Y|0.13|
+|nyt_games|The NYT Games integration fetches data about your progress|N|N|Y|2024.10.1|
 |nzbget|monitor and control your downloads with NZBGet|N|N|Y|0.17|
 |oasa_telematics|bus and trolley arrival times for Greek public transport for Athens|N|N|Y|0.92|
 |obihai|view the call status for your Obihai devices|N|N|Y|0.99|
@@ -603,6 +637,7 @@
 |owntracks|OwnTracks: track your location and send it directly to Home Assistant|Y|Y|Y|0.7.4|
 |ozw|Open Zwave MQTT|M|M|Y||
 |p1_monitor|The P1 Monitor integration integrates the P1 Monitor API platform|N|N|Y|2021.9.0b1|
+|palazzetti|integrates the Palazzetti stoves equipped with a Connection Box|N|N|Y|2024.11.0b0|
 |panasonic_bluray|allows you to control a Panasonic Blu-Ray player|N|N|Y|0.83|
 |panasonic_viera|panasonic_viera platform allows you to control a Panasonic Viera TV|N|Y|Y|0.17|
 |pandora|Pandora account, you can control it from Home Assistant with this media player|N|N|Y|0.22|
@@ -687,6 +722,7 @@
 |risco|This integration connects with Risco Alarms over Risco Cloud|N|N|Y|0.115|
 |rituals_perfume_genie|monitor your Rituals perfume diffusers|N|N|Y|2021.3|
 |rmvtransport|departure time of bus, tram, subway, train in Rhein-Main area public transport|N|N|Y|0.76|
+|roborock|"supported_by": "xiaomi_miio"|Y|Y|Y|2022.11.0b3|
 |rocketchat|allows you to send messages to your Rocket.Chat instance from Home Assistant|N|N|Y|0.56|
 |roku|add support for Roku players|N|Y|Y||
 |romy|The ROMY integration allows you to control your ROMY vacuum robot|N|N|Y|2024.2.1|
@@ -725,6 +761,7 @@
 |sensirion_ble|Integrates sensors talking Sensirion’s BLE protocol into Home Assistant|N|N|Y|2022.12.0|
 |sensorpro|Integrates SensorPro devices into Home Assistant|N|N|Y|2022.9.0b3|
 |sensorpush|Integrates SensorPush devices into Home Assistant|N|N|Y|2022.8.1|
+|sensoterra|communicates with your Sensoterra soil moisture probes using|N|N|Y|2024.10.1|
 |sentry|The free Sentry account allows 5000 events per month|N|N|Y||
 |senz|allows you to control and monitor your nVent RAYCHEM SENZ-WIFI thermostats|N|N|Y|2022.5.0b0|
 |serial|use data provided by a device connected to the serial port of the system|N|N|Y|0.56|
@@ -741,6 +778,7 @@
 |sia|provides integration with several alarm systems that implement the SIA Protocol|N|N|Y|2021.6|
 |sighthound|Detect people in camera images using Sighthound Cloud|N|N|Y|0.105|
 |signal_messenger|add Support for Moxie's Signal API|Y|Y|Y|0.104|
+|simplefin|share read-only financial data|N|N|Y|2024.9.2|
 |simplepush|deliver notifications from Home Assistant to your Android device|N|N|Y|0.29|
 |simplisafe|integrates SimpliSafe home security (V2 and V3) systems|N|Y|Y||
 |sinch|The sinch platform uses Sinch to deliver notifications from Home Assistant|N|N|Y|0.101|
@@ -760,6 +798,7 @@
 |smarty| lets you control Salda Smarty ventilation units from Home Assistant|N|N|Y|0.95|
 |smart_meter_texas|allows Texas residents to integrate their electric meters into Home Assistant|N|N|Y|0.115|
 |smhi|support for the SMHI.se web service as a source for meteorological data|N|N|Y|0.81|
+|smlight|allows users to monitor and manage their SLZB-06x devices|N|N|Y|2024.9.2|
 |sms|allows having a local execution SMS notification via Gammu|N|N|Y|0.105|
 |snapcast|The snapcast platform allows you to control Snapcast from Home Assistant|N|N|Y|0.13|
 |snmp|Presence Detection, Sensor, Switch via SNMP|Y|Y|Y|0.57|
@@ -835,6 +874,7 @@
 |tellstick|integrates TellStick devices into Home Assistant|N|N|Y||
 |temper|get the current temperature from a TEMPer device|N|N|Y||
 |tesla|integration with the Tesla cloud service|N|Y|Y||
+|tesla_fleet|exposes various sensors from Tesla vehicles and energy sites|N|N|Y|2024.9.2|
 |tesla_wall_connector|allows you to integrate your Gen 3 Tesla Wall Connector with Wi-Fi|N|N|Y|2021.12.0b0|
 |teslemetry|commands and sensors from the Tesla vehicles connected to a Teslemetry subscript|N|N|Y|2024.2.1|
 |tessie|control Tesla vehicles connected to your Tessie account from HA|N|N|Y|2024.1.0b7|
@@ -858,6 +898,7 @@
 |toon|client for the Quby ToonAPI|N|Y|Y|0.56|
 |totalconnect|provides connectivity with the Honeywell TotalConnect alarm systems|N|Y|Y|0.42|
 |touchline|lets you control ROTH Touchline floor heating thermostats|N|N|Y|0.61|
+|touchline_sl|control Roth Touchline SL underfloor heating systems|N|N|Y|2024.9.2|
 |tplink|control your TP-Link Smart Home Devices|Y|Y|Y|0.89|
 |tplink_lte|allows you to observe and control TP-Link LTE routers|N|N|Y|0.83|
 |tplink_omada|allows you to control your TP-Link Omada SDN Devices|N|N|Y|2023.3.0b3|
@@ -874,6 +915,7 @@
 |transport_nsw|gets next departure from Transport NSW stop for bus, train, light rail or ferry|N|N|Y|0.81|
 |travisci|integrate the test build results reported by Travis-CI working|N|N|Y|0.56|
 |trend|sensors which show the trend of numeric state orstate_attributes|N|N|Y|0.28|
+|triggercmd|allows you to run commands on computers via TRIGGERcmd with Home Assistant|N|N|Y|2024.10.1|
 |tts|Audio metadata tag reader and writer implemented in pure Python|N|Y|Y||
 |tuya|integrate all Tuya Smart related platforms|N|Y|Y||
 |twentemilieu|allows you to track the next scheduled waste pickups by Twente Milieu|N|N|Y||
@@ -935,6 +977,7 @@
 |weatherkit|obtains current weather and forecasts (hourly and daily) from Apple Weather|N|N|Y|2023.10.1|
 |webmin|provides sensors for monitoring the CPU and memory usage of your server|N|N|Y|2024.3.0|
 |webostv|allows you to control a LG webOS Smart TV|N|Y|Y|0.18|
+|weheat|display your Weheat devices through Home Assistant|N|N|Y|2024.10.1|
 |wemo|discover and control WeMo devices|Y|Y|Y||
 |whirlpool|integrates Whirlpool 6th Sense Live appliances|N|N|Y|2021.10.0b2|
 |whois|perform daily WHOIS lookups|Y|Y|Y||
@@ -945,6 +988,7 @@
 |withings|add support for Withings Health API|N|Y|Y|0.99|
 |wiz|allows you to control your WiZ lights and smart sockets|N|N|Y|2022.3.0b3|
 |wled|add support for Aircookie's WLED|Y|Y|Y||
+|wmspro|WMS WebControl pro integration allows you to integrate WAREMA devices|N|N|Y|2024.10.1|
 |wolflink|uses the Wolf Smart-Set for your heating system status|N|N|Y|0.114|
 |workday|generating country, province and state specific sets of holidays on the fly|Y|Y|Y|0.41|
 |ws66i|Control the Soundavo Whole-Home Audio Amplifier via local network|N|N|Y|2022.6.0b0|
@@ -957,6 +1001,7 @@
 |xiaomi_tv|The xiaomi_tv platform allows you to control a Xiaomi TV|N|Y|Y|0.64|
 |xmpp|Python 3 library for XMPP|N|N|Y||
 |xs1|get and set values of the EZcontrol XS1 Gateway|N|Y|Y|0.88|
+|yale|integrate your Yale devices in Home Assistant|N|N|Y|2024.9.2|
 |yalexs_ble|Integrates Yale Access Bluetooth devices into Home Assistant|N|N|Y|2022.9.0b3|
 |yale_smart_alarm|Yale Smart Alarm systems and Smart Hub through Yale’s API|N|N|Y|0.78|
 |yamaha|Library for Yamaha RX-* Receivers|Y|Y|Y|0.16|

README.md

@@ -119,18 +119,18 @@ Since homeassistant-0.115.3 the **Main Ebuild** is released in three different s
 
 [![emerge ha-min](https://github.com/onkelbeh/HomeAssistantRepository/actions/workflows/emerge-min.yml/badge.svg)](https://github.com/onkelbeh/HomeAssistantRepository/actions/workflows/emerge-min.yml)
 
-These are the USE Flags I use in production myself. All will compile fine and are extensively tested in every release, a daily compilation test is run at Github, big thanks to @antonfischl1980, it currently holds **106** USE Flags.
+These are the USE Flags I use in production myself. All will compile fine and are extensively tested in every release, a daily compilation test is run at Github, big thanks to @antonfischl1980, it currently holds **108** USE Flags.
 
 ### `app-misc/homeassistant`
 
 [![emerge ha-med](https://github.com/onkelbeh/HomeAssistantRepository/actions/workflows/emerge-med.yml/badge.svg?branch=master)](https://github.com/onkelbeh/HomeAssistantRepository/actions/workflows/emerge-med.yml)
 
-The Ebuild we have since `0.97.0`, as soon as I know that at least one user is actively using a component, it will be added. These all compile fine, but some version conflicts could occure, a daily compilation test is run at Github, big thanks to @antonfischl1980, It currently holds **299** USE Flags.
+The Ebuild we have since `0.97.0`, as soon as I know that at least one user is actively using a component, it will be added. These all compile fine, but some version conflicts could occure, a daily compilation test is run at Github, big thanks to @antonfischl1980, It currently holds **301** USE Flags.
 
 ### `app-misc/homeassistant-full`
 
 WARNING: This one currently breaks (caused by shell limitations) emerge with an 'Argument list too long' error. It compiles with a [kernel hack](https://git.edevau.net/onkelbeh/HomeAssistantRepository/issues/190#issuecomment-1002). Thanks to @gcampagnoli.
-This Ebuild contains USE Flags for (nearly) all components of Home Assistant with external dependencies. Most components compile, but these are too many (for me) to run tests for all of them on a regular schedule. It holds **982** USE Flags.
+This Ebuild contains USE Flags for (nearly) all components of Home Assistant with external dependencies. Most components compile, but these are too many (for me) to run tests for all of them on a regular schedule. It holds **1027** USE Flags.
 
 A list of all components aka USEFlags is generated with every release [DOMAINTABLE.md](DOMAINTABLE.md)
 
@@ -147,8 +147,8 @@ Best you start using the `app-misc/homeassistant-min` Ebuild. If you have it run
 ## Some thoughts
 * Be aware that all dependent libraries could be marked as stable here as soon as they compile. Outside HA dependencies except of portage are not tested.
 * Since I use Gentoo mostly on servers, I do not use systemd, one reason to run Gentoo is that you are NOT forced to run this crap. Beginning homeassistant-2021.2.0, handling for systemd was added by request, thanks to @Tatsh for help.
-* I use an own profile based on "amd64/23.0/split-usr/no-multilib", planning to move to merged-usr.
-* python-3.12.3 is set as default target.
+* I use an own profile based on merged-usr "amd64/23.0/no-multilib".
+* python-3.12.9 is set as default target.
 
 # Bigger Changes
 
@@ -371,13 +371,13 @@ I run Home Assistant on a virtual X64 box, 4GB RAM, 3 Cores of an older Xeon E5-
 ## My machines
 Currently I have three VM's running:
 ### Production
-Python 3.10.10_p3 / 3.11.2_p2
+Python 3.12.3_r1
 4 GB RAM, 3 cores of a Intel(R) Xeon(R) Silver 4114 CPU @ 2.20GHz
 ### Dev / Test
-Python 3.10.10_p3 / 3.11.2_p2
+Python 3.12.3_r1
 4 GB RAM, 3 cores of a Intel(R) Xeon(R) Silver 4114 CPU @ 2.20GHz
 ### Dev / Test2
-Python 3.11.2_p2
+Python 3.13
 4 GB RAM, 3 cores of a Intel(R) Xeon(R) Silver 4114 CPU @ 2.20GHz
 
 ## Hardware I use
@@ -606,56 +606,57 @@ A daily compile test is run at Github with Python 3.9 to catch general faults. E
 
 ## Licenses
 This repository itself is released under GPL-3 (like most Gentoo repositories), all work on the depending components under the licenses they came from. Perhaps you came here because I filed an issue at your component about a bad or missing license. It is easy to [assign a license](https://docs.github.com/en/communities/setting-up-your-project-for-healthy-contributions/adding-a-license-to-a-repository). During cleanups and license investigations I have been asked often which license to choose. I am not a lawyer, but I can offer the following table, counted over this repository, perhaps this helps your decision. If a package has more than one license listed, all of them are counted.
-There are 1849 Ebuilds in total, 1838 of them have in total 1861 (42 different) licenses assigned.
+There are 2387 Ebuilds in total, 2369 of them have in total 2413 (43 different) licenses assigned.
 
 |License| Ebuilds using it|
 |-------|-----|
-|MIT|1062|
-|Apache-2.0|408|
-|BSD|108|
-|GPL-3|107|
-|LGPL-3|25|
-|GPL-2|23|
-|BSD-2|14|
-|GPL-3+|14|
-|LGPL-3+|14|
-|all-rights-reserved|13|
-|Unlicense|9|
-|PSF-2|8|
-|ISC|6|
+|MIT|1356|
+|Apache-2.0|553|
+|GPL-3|149|
+|BSD|128|
+|GPL-2|30|
+|LGPL-3|23|
+|BSD-2|19|
+|GPL-3+|17|
+|LGPL-3+|17|
+|all-rights-reserved|15|
+|Unlicense|14|
+|PSF-2|12|
+|ISC|8|
+|AGPL-3|7|
 |MPL-2.0|6|
-|EPL-1.0|4|
-|ZPL|3|
-|LGPL-2.1+|3|
-|AGPL-3|3|
+|LGPL-2.1+|6|
+|ZPL|4|
+|LGPL-2.1|4|
+|0BSD|3|
+|CC-BY-4.0|3|
+|PYTHON|3|
+|HPND|3|
+|EPL-1.0|3|
+|CC0-1.0|3|
+|EPL-2.0|3|
 |AGPL-3+|2|
 |LGPL-2+|2|
 |public-domain|2|
-|LGPL-2.1|2|
+|ElementTree|2|
 |BSD-4|2|
 |LGPL-2|2|
-|CC0-1.0|2|
-|0BSD|1|
-|CC-BY-4.0|1|
-|PYTHON|1|
 |BitstreamVera|1|
 |matplotlib|1|
 |OFL-1.1|1|
 |ECL-2.0|1|
 |Boost-1.0|1|
 |PSF-2.4|1|
-|ElementTree|1|
 |NEWLIB|1|
-|HPND|1|
 |CC-BY-NC-SA-3.0|1|
+|MPL-1.1|1|
 |CC-BY-NC-SA-4.0|1|
-|EPL-2.0|1|
 |GPL-2+|1|
 |GPL-2-with-linking-exception|1|
 
-(Last counted: 26/05/2024)
+(Last counted: 14/03/2025)
 
 I did my best to keep these clean. If a valid license was published on PyPI, it has been automatically merged. Otherwise I took it from GitHub or alternatively from comments/files in the source. Sometimes these differed and have been not unique. All license strings are adjusted to the list in `/usr/portage/gentoo/licenses/`. Some packages do not have any license published. In this case, Authors have been asked for clarification, some did not respond. Following the [official Gentoo Guide](https://devmanual.gentoo.org/general-concepts/licenses/index.html), these then were added with an `all-rights-reserved` license and `RESTRICT="mirror"` was set. Find the appropriate licenses referenced in the Ebuild files and in the corresponding homepages or sources.
 
 A big thanks goes to Iris for reviewing this README.
-Last updated: 26/05/2024
+Last updated: 14/03/2025

acct-group/gpio/Manifest

@@ -0,0 +1 @@
+EBUILD gpio-0.ebuild 149 BLAKE2B 3d48d41dbcf9acdfda3e3d81fefd5767aea861faeef65ea5b95caa414160e340303e9788f1444b2d1d9b7631d6d6d461b7aca2558b3f69b7bb26c893f73ca24c SHA512 5dd40eea1228c17d97955b872eec9d63cf4a3b80d19da23db6de9b8f566e1eb91e5495b98eaceaa18115af92ae1a0e354a09df1fa8d5c5642fd14b8cb35c3e87

acct-group/gpio/gpio-0.ebuild

@@ -0,0 +1,7 @@
+# Copyright 1999-2023 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+inherit acct-group
+ACCT_GROUP_ID=-1

acct-group/hydroqc2mqtt/Manifest

@@ -0,0 +1,2 @@
+EBUILD hydroqc2mqtt-0.ebuild 149 BLAKE2B 3d48d41dbcf9acdfda3e3d81fefd5767aea861faeef65ea5b95caa414160e340303e9788f1444b2d1d9b7631d6d6d461b7aca2558b3f69b7bb26c893f73ca24c SHA512 5dd40eea1228c17d97955b872eec9d63cf4a3b80d19da23db6de9b8f566e1eb91e5495b98eaceaa18115af92ae1a0e354a09df1fa8d5c5642fd14b8cb35c3e87
+MISC metadata.xml 397 BLAKE2B 77f11f2779e3c2147c1eabcd034c7a07fd32c004cfd8363104956e10ef3f2381a710aef0152e4ed6a598c9065aa0a7b2c3f63f739c67dcde061527a4bf030679 SHA512 5e0bcf6f8de4434343b44a0a4898184e933b1a069b31bffb58e16aab438a1937d2c7707f0afed50c7efd0f55d5633e26738e294c58ff44452b4dd1ede006ec91

acct-group/hydroqc2mqtt/hydroqc2mqtt-0.ebuild

@@ -0,0 +1,7 @@
+# Copyright 1999-2023 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+inherit acct-group
+ACCT_GROUP_ID=-1

acct-group/hydroqc2mqtt/metadata.xml

@@ -9,7 +9,4 @@
 		<email>proxy-maint@gentoo.org</email>
 		<name>Proxy Maintainers</name>
 	</maintainer>
-	<upstream>
-		<remote-id type="github">node-red/node-red</remote-id>
-	</upstream>
 </pkgmetadata>

acct-user/homeassistant/Manifest

@@ -1,2 +1,3 @@
-EBUILD homeassistant-0.ebuild 304 BLAKE2B 9f57819b2f9fdeff37cd5d32d89eaf70eea6d7b15b0a520fe0d51c0ca433fab3d68a750ee6cebf9ed626ad1716d113abf6316623abfe6befea49ff452a4e1050 SHA512 4433bc3e0868cf73abf4f83741c40f4802c3cfa6902b3b4e929a19254ea8cd82f4f838e71221540716cc0cbfd07dda8303cda6e91da59f4fd574be2198d6e960
+EBUILD homeassistant-0-r1.ebuild 315 BLAKE2B 382c8ea9cecded59859248ce1e6e31e2b8e09ca442df1356e1092bd7921ee1fac4927760891c59a78b0e45b83424d6bce0c996ff58fc8e61d58c4f4191b1becf SHA512 10afac67a518c19dd563c6aae5f3e825285b83b6c8a6b0d9b492af45a92a446c30ced76f084dae6357975ec893d181bd3869b5e0d8d3e0732d9ef33107318e22
+EBUILD homeassistant-0.ebuild 313 BLAKE2B 6558e433cfc1642cbc33d81a8a636d9448f9a9679696d3467cb98ae789be1b441180a424a484d62bf5f5f5b8fe3c28aacb9c7183caaeda9d5450ada8070e2722 SHA512 81257e3446f152df3db81e852f8bab9e2abe062b048c4fb9ca97a014250b5ddff6731f609ce288b090005cb88698d9f42a9045e58c6d5e4844ea9efc83b8ceef
 MISC metadata.xml 245 BLAKE2B aa51251edec756fb62676a8bc1034117d7a535b77d20fae3b84ceef1092c6a5e38d443b2ee625e10f1de4fcd21e3a11060b6ce576c9822ba2654a1f57a663e11 SHA512 cb8da34fa343d134d0a4b98b47a799abe016eff01f518a4ac0993cddb68c3324e8b610d28559bb72b1db1ca33c08881190d5e3e102ef42c3b9985fbfa4796ae9

acct-user/homeassistant/homeassistant-0-r1.ebuild

@@ -0,0 +1,15 @@
+# Copyright 2020-2021 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+inherit acct-user
+
+DESCRIPTION="Home Assistant Program User"
+ACCT_USER_ID=-1
+ACCT_USER_HOME="/var/lib/${PN}"
+ACCT_USER_HOME_PERMS=0755
+
+ACCT_USER_GROUPS=( "${PN}" dialout usb gpio )
+
+acct-user_add_deps

acct-user/homeassistant/homeassistant-0.ebuild

@@ -7,7 +7,7 @@ inherit acct-user
 
 DESCRIPTION="Home Assistant Program User"
 ACCT_USER_ID=-1
-ACCT_USER_HOME="/opt/${PN}"
+ACCT_USER_HOME="/var/lib/${PN}"
 ACCT_USER_HOME_PERMS=0755
-ACCT_USER_GROUPS=( "${PN}" dialout usb )
+ACCT_USER_GROUPS=( "${PN}" dialout usb gpio )
 acct-user_add_deps

acct-user/hydroqc2mqtt/Manifest

@@ -0,0 +1,2 @@
+EBUILD hydroqc2mqtt-0.ebuild 234 BLAKE2B 3ceee4a6be60a29c575bc66128a7d1d5c456ef93cd0725b499c15eaf2c3079b3cff5266a64f2c01f19749b03606b30854e64d90ec39a474eb28c0c0ffbd1d916 SHA512 1818a3a60f1213efd929c892fd794f79ff090d4bf870b770deb75f06edab4898c08f865b2b0242421e679302534bc56d87d8eb5b8182d74ce37ee287ef920e84
+MISC metadata.xml 397 BLAKE2B 77f11f2779e3c2147c1eabcd034c7a07fd32c004cfd8363104956e10ef3f2381a710aef0152e4ed6a598c9065aa0a7b2c3f63f739c67dcde061527a4bf030679 SHA512 5e0bcf6f8de4434343b44a0a4898184e933b1a069b31bffb58e16aab438a1937d2c7707f0afed50c7efd0f55d5633e26738e294c58ff44452b4dd1ede006ec91

acct-user/hydroqc2mqtt/hydroqc2mqtt-0.ebuild

@@ -0,0 +1,12 @@
+# Copyright 1999-2023 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+inherit acct-user
+
+DESCRIPTION="A user for ${PN}"
+ACCT_USER_GROUPS=( ${PN} dialout )
+ACCT_USER_ID=-1
+
+acct-user_add_deps

acct-user/hydroqc2mqtt/metadata.xml

@@ -0,0 +1,12 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE pkgmetadata SYSTEM "https://www.gentoo.org/dtd/metadata.dtd">
+<pkgmetadata>
+	<maintainer type="person" proxied="yes">
+		<email>web@inode64.com</email>
+		<name>Fco. Javier Félix</name>
+	</maintainer>
+	<maintainer type="project" proxied="proxy">
+		<email>proxy-maint@gentoo.org</email>
+		<name>Proxy Maintainers</name>
+	</maintainer>
+</pkgmetadata>

app-misc/home-assistant-cli/Manifest

@@ -1,4 +1,4 @@
 DIST home-assistant-cli-0.9.6.gh.tar.gz 61446 BLAKE2B 30c731701e0b69ead96bbcb22f563dfa680708d3f5d0181efdb8e49b4eb6e5205be89bbef863f94ba671da369c902e38ce201193a486886db648819792e0258a SHA512 357b6fbf85b1b36ce624f6a213bf78858f2bbf2a94e2f8907d76b242e239985dafed21887de5b6c8bbcb595e56e0695563ed4321f0128ba5619e9b3cb06e8264
-EBUILD home-assistant-cli-0.9.6.ebuild 2244 BLAKE2B 461a55a269f2de5ffd76cd4cb5238be7fa82b928c291c6abca4419521bc1cb07920b423985a77deb415e1a84c08a4ce8f8d09df79f5db6d231fc45b84cf3ce4a SHA512 46e45af874f7d4373b5587b9f757073ff903f7129edf47ae3e143a70a2ac52eb2503ba9be9b16ae3d94322cd80b14909573d2a245e8a33ed8660976e8eb25324
-EBUILD home-assistant-cli-9999.ebuild 1623 BLAKE2B dc44e5a2acad3943269ce6f8520d016a9de3930655a3ea1fdf6625eb36691a11bf173ae978f4f4d58d113cd40cee1febc264060b676b24a6b224a27663168c8c SHA512 f3af01a1591756eda3079308cec819e2dd9a762e91e6fea3180d3b142a977c33fff2da2d3fdbad2dfabc94f434505899ff934ad8e0a56afa7458bc61edcf1caa
+EBUILD home-assistant-cli-0.9.6.ebuild 2245 BLAKE2B fb8fc55cc9416ebacf033904b40ef5d7ff59bd22c77e97900350496faa0e4fc484c14295b79c57aa67f82b4ebbac6410a119c4c48a3f885a5755b9754b787866 SHA512 2ddecb76ac0e03a2a93b94b2f4cbdb85346cbdb75064646ff7ee215e85ece955488307e4c17b199abf701ed0b216a791e3f6a30d47ce4a6c42221008222ca8f3
+EBUILD home-assistant-cli-9999.ebuild 1624 BLAKE2B f94fef52c2a34048877e96a2ec744eb597773cbde1b218de4fc257ad8c11989397387fbfd70a2ad453de881e25bbfcd471328d9928a1a638a95f8019a1dfef13 SHA512 6a5e1a89a8df1b1c1919f74fb8a0176ebd58f70bd9509a6062fae2df029d732c49ac796b7bcbbf9686f1f006643edb7277d89dd41172dbd64423725a2d49cfae
 MISC metadata.xml 555 BLAKE2B 11799c15c228e1c192366d51983315d1892f865502cb7e506c60578608f9e05deec2b94b94585f71d638df952976a05804342a712476a66474f935e2c693c64c SHA512 d5287d92892fbe91fbd3dcf9ad47ab83fa788bcf14c07ad5ba21f471d1bf7ab97c9576416d6d03d60639e9ad96410287c7d814e9aa2c54429a7b3f87d924209e

app-misc/home-assistant-cli/home-assistant-cli-0.9.6.ebuild

@@ -28,7 +28,7 @@ RDEPEND=">=dev-python/aiohttp-3.8.0[${PYTHON_USEDEP}]
 		 >=dev-python/click-log-0.4[${PYTHON_USEDEP}]
 		 dev-python/click[${PYTHON_USEDEP}]
 		 >=dev-python/dateparser-0.7.1[${PYTHON_USEDEP}]
-		 >=dev-python/jinja-2.10[${PYTHON_USEDEP}]
+		 >=dev-python/jinja2-2.10[${PYTHON_USEDEP}]
 		 >=dev-python/jsonpath-ng-1.5.1[${PYTHON_USEDEP}]
 		 >=dev-python/netdisco-3.0.0[${PYTHON_USEDEP}]
 		 dev-python/regex[${PYTHON_USEDEP}]

app-misc/home-assistant-cli/home-assistant-cli-9999.ebuild

@@ -27,7 +27,7 @@ RESTRICT="!test? ( test )"
 RDEPEND=">=dev-python/aiohttp-3.9.5[${PYTHON_USEDEP}]
 		 >=dev-python/dateparser-1.2.0[${PYTHON_USEDEP}]
 		 >=dev-python/jsonpath-ng-1.6.1[${PYTHON_USEDEP}]
-		 >=dev-python/jinja-3.1.4[${PYTHON_USEDEP}]
+		 >=dev-python/jinja2-3.1.4[${PYTHON_USEDEP}]
 		 >=dev-python/requests-2.31.0[${PYTHON_USEDEP}]
 		 >=dev-python/tabulate-0.9.0[${PYTHON_USEDEP}]
 		 >=dev-python/regex-24.5.10[${PYTHON_USEDEP}]

app-misc/homeassistant-full/Manifest

@@ -1,3 +1,6 @@
+AUX genebuild_2024.10.2.patch 6287 BLAKE2B 6b7772b39a54f7c9b957a862aac37c3f096e529a1aaf11f1a31ba6322c8c3d772f4179c81014fe69bceddd247110650da45faaf8eea9c22ab109f70a6c03b54a SHA512 4f340c327d7febf9541954b2d81786a281372f4f50c92ef0b92251bd00361b1abb594d7d547c47cc1a0a90b5e03f495d8058643c4a6582b94e68bd0a84284212
+AUX genebuild_2024.10.3.patch 6287 BLAKE2B 7f2c5dc27ed1f27c22593a21d3cf1cb451e0f61213b34d8496703353084a9a1f0745f8e593f7c7dd6bf035ff7b13c27b8c091e7ff9b163c9cf00708fba75d06e SHA512 f730183b20dec1856259c7d4c1307009783ca5221e4af93ec5d6663cac99741bc855f209438b94fac50c4025069521bb185856a09747dec5dbeae0112a0cd398
+AUX genebuild_2024.10.4.patch 6287 BLAKE2B baaffb2501875bd4da918851bc5b6deafd6689d1df1ff29c55f791e04a89ef72a270a55f1613e25fe51446642166512e4ef53b3852118aafdb7633a231b0a119 SHA512 d2c566041dcefa71f5f777a23e7469eafb47c45fc0dbf0c4d289f88ddb73e0a7c012df6d9210de670656a8af679052822824262fe31b116d4d893e61f6cd06e1
 AUX hasstest 72 BLAKE2B 219dc5045193bbbf18f91d37d90072304c3f9937ac55337b692fcb03adea8e3fc63b3852b928d40b13162172d22f712feedb088d3d9b54c9b199a01c7446c865 SHA512 57491109c03926f0ab0a1cd3f55da0faac1afafc0ba405b4244652376d4da943227c17b1bf6b136dea151649cf02caf51d9aa49581addffc8ccf4c80d3c43c9c
 AUX homeassistant.conf.d 289 BLAKE2B f4a85e5a451a254a8ef39ae481275eb93b52df645d5b5c5801fee30aa548b9ccc0eacc9fb5256793d819dabe7b53f6ff5809798d0cf771464d56aae5a58332d2 SHA512 db860c0c66d0ea66eae08e62befc07d06ccea37a2ab89280328faa54ef6cc0623a65257e7806c72b1afe608e502566ca4ee8ac7de3547705ee6394184b5da110
 AUX homeassistant.init.d 1032 BLAKE2B 5ca9e2232a35ddfd4279fd9537a112f9edd59edce7468f7054e6d049f4d3a60d4ef82d74092eec1d7067bf0d27579acf6e1b19f77b9f0dca26126dd59bb76838 SHA512 0ce07ebf1bba1df4772def0c6eba126dd8a8347208d15fbe1cac774f62dd100e172f0d8d5d26f9dda7352f36a5191e1b771af7f44fcbf16d365d5595451b44fb
@@ -8,20 +11,24 @@ AUX maxcube_TypeError_dirty_hack.patch 1460 BLAKE2B 08570971bb3ce4c120086a32ec20
 AUX recorder.yaml 114 BLAKE2B af04840805aa13124208584e7f1d40335905a083ee7deead5c0e4324c969f2a231c801c23e42075782950aba7535496d92747bf03efd73a80b0d07e8492d18f6 SHA512 cb4e353e54fb6dc7034569b8d62ddcdca92680c23c2c4e1ce707d21cf95e93f41a0c44521d8c3ee90b68c830f6b8e65dab82ae64bfa09727ae384550f7de0c94
 AUX socat-zwave.init.d 637 BLAKE2B d61c1024a6fe3ce8d322e62ac1ec15e00d08f5c5a63feabc8603ecc51ec16e0a4775e0c7da83d12d1ef0c9815c9ebf8ec8a86a678bb4a3b40decb04adc887f26 SHA512 2b13cd4175427853d5a4169cc7d441d62618e8136e4f5d9fd24d08a47f6916953ebd1e747ea9c7a0907b00766c7b2108ba3b8917178fd9a795da23e6525a0faf
 AUX update-homeassistant 1326 BLAKE2B 917bdd332c4e5dea5177eecd11a7f8d72b911fddfdc8e5eb54960c526fe8c735e20d44e570cf7aeb99669d2a9670c70da1c5fbc30efb284d1f0f330799de6e24 SHA512 3c05f0d6d1bde0e1526c3e679568794c07091e7856dfd8793e13feec6f22725ddaa3163ca2c81d9df86cf73573f932e561743f05de420b350a0b68f6a9582aca
-DIST homeassistant-2024.3.3.gh.tar.gz 16494189 BLAKE2B bfb728d5739c2fbdfd94172f2600e1764ca3cbc1a37bdfd4f882a7da647c910f8a7947e63da69bb81dd7b452e4f91ad4091195f55d8e9145b9523895b8b81d61 SHA512 a08a0c6776f34826128bce3310003ac104822f6391de403ac83ee037e9d5d6ca4c145698337555d127e0041354387a62304cc8e6dc18907bc330c74ce2919072
-DIST homeassistant-2024.3.3.tar.gz 20325232 BLAKE2B 4f4a28ea1e4f2a68d2e31c49fbaf6a5ae4f1ac2b07f67b0671439eaeb344b1a87e91840f9bfce4cb7e5275ce40aa952b66242d1f7c6b71ebf0a860f03fa524ff SHA512 86aeedf514f20af8f525d94c37ba579301cd0eb3b7249882be46bd2142687f8500942fa1380393eb1bc3df98cbedc74d3e147d90c2322b0b6635eeb5788403f0
-DIST homeassistant-2024.4.4.gh.tar.gz 16723900 BLAKE2B ca4d862ff72a20aeeb883f927dce436be58100eeb008f62f211d31f6bf384f67e45b95cea07af1cae881f2ed7bd3b240f555f204b81596d0968ad678a11b0367 SHA512 c9fc1828f276f5ab37d6ed335886c13a860232e66009922d8a9ea5f53b2b181ba39f90c2c3932961dd0724bda6d491a59aeffec983eab592ddfac0bbdf1683b5
-DIST homeassistant-2024.4.4.tar.gz 20721794 BLAKE2B 38ef086468d0e818035ce2572ca94249010ec906ab08ba63bd9e63ae16f0d5ed9f47fc8aa84120f3664ba578908652e20cf95e9e5c414919d1b389f3d3aa74e8 SHA512 93acf9ada78bd97134f05e2b3a0052477adacc079332da89fa41dd3ff432180ebe2bdb041b3a33c8df85bfd75090e305e9cae615db405b0c9cf94631f504eca9
-DIST homeassistant-2024.5.3.gh.tar.gz 16996185 BLAKE2B 402ac1f4e417604c3c6ebc91c3e22ce452c05211cb35ee871b56f36b0046dbe362622e1555d22b2da562be56871cbef20e5a5470fe6a2c13928dae19a511e5a3 SHA512 f7cb3fa6008754890a18fe27f96fafd831f9e14a3129be1b73e7c5d601697cc3dfc26de75f2357b3e5047b0f94a00cea0549771e324af45084bc5be31dc1cf6f
-DIST homeassistant-2024.5.3.tar.gz 20991448 BLAKE2B ac1c4ae9d39811ba6804ced95e77b2a14de9d16e329885171b8230f2f613d01cbf2119151043bdad168fc4233c3513ad6b8028f15a74280e4a0dca25adb8f263 SHA512 c129ff52daef30b047464264baf2b173beec75a12eebe781975a5cd2cc833f2331ae8bb820e00ca67e52f7d6b471bc42424516589ec2ab9b3d8d5883bfa5509c
-DIST homeassistant-2024.5.4.gh.tar.gz 17009424 BLAKE2B ec299c5c34f8244d4ac374345af15867e620dff0f0d067df5f53b0c692bf332b588777315222bdfc215e1f394e71e15fe8c1452f6b4a2ebe913c79e09904f424 SHA512 d2c9055feb3793e0d24ff98d7a0899c64eee2cb1efe72aaac9c6c6d3875383e3619d49408fcf54adb659ab80c1aac08127cbc0421372f7d3b093699b161a63b0
-DIST homeassistant-2024.5.4.tar.gz 21029673 BLAKE2B 4a9c9a6d1c32d0f434ba930d6820bd65593918fc131c31b9d4765191ce6da22f91d2eef10dc97de49bc7e741164b4f47440e505f5b7ac554c2cf9dee08cfa30c SHA512 2ee22a9f9bce485131dc1d06001bafacb107951768863115661ef4ec617037d710d4ba33b6424c17436e0a5e0ad9db142e8beaf5416646cfc779d9fdb3ada533
-DIST homeassistant-2024.5.5.gh.tar.gz 17013825 BLAKE2B 03eba1e79d9c1c2ff8a751c84e9c51f8c4396e8d9c6ef7800d7ae8db9237d5b511f76d99aed4db7a9a851c8036dbbf129a66b67d31333338ef17a2a4805ecc04 SHA512 f84350c715438e715a694d211bd4452ca43b1a6bfee30266ee07d4d94a725df8129847db6bc94958759b971759bbdc78fd968fda769b238f0cbf5e98991e270f
-DIST homeassistant-2024.5.5.tar.gz 21077969 BLAKE2B c08563c79974d99bb124d33f2deeee693a4c0b92fb1a17b9c937d8a1a125d1c4c5723e469305a6597c7aae7629713b1f1935608b4c3d29176098fb0a645513c0 SHA512 1bfab28f86ceb64d7b4c84b418811d57990a45b730b361d603a22bd8ccb64a6531cd79f5bfb1e282aaf49e3b711d74b1f94fc25915619c0a6a5fb2ef9b4c4796
-EBUILD homeassistant-full-2024.3.3.ebuild 86657 BLAKE2B 42779a673528864b2de8f7d6021f23ad6b02fb638aaabd81471bebf93f2891e1dd9158269702258ed39d0685fc55fb32a96264f510811db84c3ede194701ed65 SHA512 2b17c9f4eaf4e0661f26939e68611088dcd3ca1ed3d09046f32363c82f2520e9fe3fd59a305c587f72d73d4527ae4d8cd363a983f8534c683d1f20142e13cd92
-EBUILD homeassistant-full-2024.4.4.ebuild 86902 BLAKE2B bd8a9d4f2205badf7b89b7d4fb486b1fc3d26fc8c0428417036324c319392240481ced1e4ddfad4f8de0107243f42f30f21ead99a7519173eb6f482048b731b3 SHA512 100b322327980f6df1aac797d3ed5e9907d27de75d48e87cb35a10dc2cfe2955ae8daafce98d2699b6509856c81346466ae90267704d00ca9d8f5bfebb5efa46
-EBUILD homeassistant-full-2024.5.3.ebuild 87169 BLAKE2B 9f03af1194861502031d3de6b017f8bbdee999aa176e4cfd287030f12b80d6548d9bb161417cd135e3650f78d17d90681b92b958ecaddba627099499622fbb38 SHA512 dce74d1f0b49e6f516e0338b975ad77d254d1e2a0eacb845b2804ff86fedcdd69f8a4f8ebc86616b70e5607690ab204d8144ba410aae7ee88439b9759ef4e8fb
-EBUILD homeassistant-full-2024.5.4-r1.ebuild 87149 BLAKE2B 0a3996998ed8319d25cd9e212897f0ce6d81b69656b7718800d648f9a8e02d9b69c8e3d84a32cb92bba080ff9c806b9cdbeab5147caa9a8fa24915c816af965c SHA512 e0d5bfb89528660d457486aa3eee7f40edbe096222c224ca025213b0175be4e24dbad3801c29d63565ebbedfcdc04c450eaad52a5301e47f387fa948b417b3e9
-EBUILD homeassistant-full-2024.5.5.ebuild 87190 BLAKE2B 22ac1dc7d5be921e7a72cf1eb9bcd6f770f2bb5a28e7bd04daaa5afbf4ce2e25b07b2c214d3f3dcfdb3f0a688f948f0e23e760d0b03593a791872ec4afa41311 SHA512 8bcb7381d43930fb7e199e0bba32cf82adfd8afc7af4eaa6ae9dcf9a628e50e38cee70fb701aa87c10a864fea4226ff6253507720ed0ae1a988ef7dc524ef551
-EBUILD homeassistant-full-9999.ebuild 87103 BLAKE2B 7211742c7bc0b732010a3949a91152ea1b477c5512e352d2505714e46d984dea67ccbaa8e22c05c2889bc4398ac25c36d4a563e3056cbd7c436fec695020adb3 SHA512 f823b09baddeb5a9d4ca1609234987706a0b47d38044f193b5bc32c4b73b6adc208576511e4e00e8b1e5fe29e81520ac6123ca5f3c1887d7d0b504b844c2b8db
-MISC metadata.xml 92481 BLAKE2B dc28a3bcc1f62671eebb4c0131e0c2041fcf01c7280e412f04331a1af1632775e50733f0e025c865c6da5058ffdf84d2209f2d12eab7b0f788adce9d8bafcc83 SHA512 8b856f5b123b24e9b856b1d40749606cb4d0079be8cfcbe3443f8afbabc3ab34de780fc31072627557ccd242d7314f8f30534c00d438c651e02873f98536899b
+DIST homeassistant-2024.10.2.gh.tar.gz 18778811 BLAKE2B 36dbd1c111c4c068fe78ce1b2e334051ce911b7535dfca4eea105340e3e9eaa1c6115dde0fbf331f38e818434aee80c47e98b80e6a9d85f48d530df54a05391c SHA512 bf292b3d248cc86ffcf6563571b426e4be90d63005a260fe27f40d4fa5cd55f3a303ac4eb60e935253ed525ad851b120d15b3430c2206d0112e82e5aace4ff80
+DIST homeassistant-2024.10.2.tar.gz 22947130 BLAKE2B c861125267537495bc40449330a5f7fa7d97e72ecdc7b2f475ca7979144a46c8ab28b12e7899cab59c28acfe2edf97e7a3f9077177f6f00f2dc0f2a9b7a186cb SHA512 55b27af2f089357cf6db53152d664510733a80742aac05e879e9a4124c4864c893a37c45cef2526e4b5e2d62e6bc558a7aeaf9f6c222c1b0008002e7cc3f2271
+DIST homeassistant-2024.10.3.gh.tar.gz 18782063 BLAKE2B 6d124e7282815ebb106051e6795d801fc07b18694a172711a34baa0e909f2207c4cbca79ab6be73e3b4dde333b2ede66cfd2cc1226897bfff878878c8a2f05ea SHA512 8ab59252eb0c25e0bbea92fa594a94bb086c718528af4a81da8ea7d790c2d67a5253a1b177c9dc2862486cd7786703985329646e6084e23a86e20ee24f9076b2
+DIST homeassistant-2024.10.3.tar.gz 22982969 BLAKE2B de54bf0dc737fe6fe9990d5bef07df7eca5ff2962df6832e72de471f5b4f4f458a5e38c4d31083f09305e428a419294cf408a884620a687f6a41ce7bce0f0b0a SHA512 9666fdebc99ff6712375a2b1d4d29073e5ddb26d7d33c5e3f01f6b96b7f64fb006746998f81003bc12170dbed92de90b3d21c55ff89f395cd18701073b2f947f
+DIST homeassistant-2024.10.4.gh.tar.gz 18785041 BLAKE2B bd3d63a8f16555976bb9d5b61a8c7ed7e29f709a398830b0c37fb581c35c6ff755db523b33743c92c55468b6025444333e412e2f3fd915fcc3778d723103ff32 SHA512 dd8557f7c86e045269931efa80c7cfaafdd2a53edafdff3af31e7cd2d0438c05909bd34f6fe8bb3945ef7a8f090806d207fb41e9055b21686015078209e4c553
+DIST homeassistant-2024.10.4.tar.gz 23077043 BLAKE2B 2ec1562ae041e8ec37506945a4f21f121a721e004e9c20ff295c7a251c89279cc0a34f1e1dd2946edd589d8ba74b9f4d24133fd465f2cdc5331ea16720b03e9c SHA512 de1de3a649479d8e8f745a559ac9ff9f297651571bdcbfda1851006a64b8c8bd308b1769825d05dded541b0fe21c4e82f632c731de46e6a4630e03ade065712c
+DIST homeassistant-2024.11.1.gh.tar.gz 18864780 BLAKE2B dd6989f71961fc7113aa56903637c738797057bd254d7397d7f1988ba641a3605e5396890f0514eb4bb47a2bd7cea7b1c097db913d7bcb78850aa766969e7742 SHA512 3729693a082523ba9e20a4d3d9e6f6ab11093ac3cb5ec6ce0add6233807f8079a6e78b928f91a9ccd3114003f801046626b52845ff006083320eec0fe4819fd0
+DIST homeassistant-2024.11.1.tar.gz 23378775 BLAKE2B bf225a3f082dbc8986f2c20e64ec4228f5f15050618382a2e495244c1b693319eb8df3789c08bc1864ba4ce8082628c7d3cd6ee412ae0bd73bf0e10840a4801b SHA512 cc61f6f8db9d7cc4c859f2866ab99a0e578a6502157d59441cc26db51603d473e7cf239848e1db660c6a6ea4b19da25b09f33a0274c3e96105df61354f1d7f87
+DIST homeassistant-2024.11.3.gh.tar.gz 18873491 BLAKE2B 7082b0b5f688e5da76fece577944927026d6594ef6d2b91c5106dd56bc3149a7f74e4394612ee526de11bf50e31a4a0167557f06f035c9a707c70fbf67cad69a SHA512 7ffbce37aa915a99a916d534bc02742b248e7b7215e05bbd6654aac4db094b89e8f7d75be726ac3caa0f769e0318267bd0753daa2f4da77142cfaa59c0c007d7
+DIST homeassistant-2024.11.3.tar.gz 23432503 BLAKE2B 4c431cc5f43dd8d179c1a8292de282a9331157e04fdc20b165dc3e6ac6d2031710fc8abfc7e2f09de4f364c1b6d35398a07e40b4da0b30e414d86b44cb09321e SHA512 8f33c376ba988270262b3c3f627db85e7a44d19a5d57e7435b5d4158dcab042bf76b04ba271fcd251c614bc9d5a328984f24cbaf95b98ca0de2bc9751e956d7e
+EBUILD homeassistant-full-2024.10.2.ebuild 87595 BLAKE2B d9d0cdeff6c52161ff06edd8e03e1e93f1298de231a7b170e583a6ca89d9620f1553f9b6ae74c2e32263faae2fe4ca23fb6a096440c48a71909f448a96aea0a4 SHA512 1934cda3aabd6ea7e4c0801bd239953cb45a187419246abfd6f6ade2a989b11e04cadc2ebae3fedee0ad5cc0da77f1a9a346e14df541e8e0e17fb70c000cf090
+EBUILD homeassistant-full-2024.10.3.ebuild 87595 BLAKE2B 758a55de61059704ede6d67d4bbd035245a09e16bc5169067f76f131d4ae7474ba3dadb1225ef0424d8842993bb89b221993efc5211c475c2e416275b9ae0e39 SHA512 c5e58a58a4f836ff922ec1beb01dd602fa79be5816183588d7952fc5b9be5f11ea0b96c9e52021708625121fb7bba869ec7c5dcc4cef4ecee9d6e32acff9c17f
+EBUILD homeassistant-full-2024.10.4-r1.ebuild 89724 BLAKE2B d95d44cee2682fd7aed7764cff47a48bd34ad19191846056b359c31930b8b0af6e01d5d9098d21501dc395a098a27981762e87d7d094e2c5e647e90fdf1fa8d5 SHA512 08618e70a8f8a21dc0607cddf2ed27d6c5b01778a61a61ff933969b555b5e2c7b1eb5898793e66b984b170d03694c306f030aeae8c0b2ad647df378fca38bd62
+EBUILD homeassistant-full-2024.10.4.ebuild 87595 BLAKE2B dc39d8b96bd1b3972e38ae560404eb310fe9a48a91c05b35bec0b27804ec6e0ead239598f1a954773f47eb0bca76d67671bc8bca8ec6bc43030178b9c2410958 SHA512 02dd32da64ffdce50f4b21401776f350522856216eff3852578239275287db2de5163aefc2c67054dbb99d2f655d58ad2efc023c17face348ede1f3ef0bb87e0
+EBUILD homeassistant-full-2024.11.1.ebuild 90588 BLAKE2B 150330cc03acd6d9ab7d5348f4b47c86ac2eb47523bb1937447aa02863883cc103b67972f4616caf334c66c51bf30439d41362d9ecda8aa3da8a5b416a9b13ef SHA512 38e930cfef2337b61bbbe360daf8af778241b79da42d8c1066bb73f0051750db5176cfe1d78d196e9bb74aab551f13d624f152f3526899130552651aaf2c6b97
+EBUILD homeassistant-full-2024.11.3-r1.ebuild 90674 BLAKE2B d1978750d8c6e815ab1d24943a37514c60931a6b1657e7b0015c32b6de5b4edc335b27e4bdb0a18da7084dc4861211672c4f1824b5006b23fa5b378dc6317569 SHA512 893fdbfd09718c233423f431169806d62454ce8d2b1289b0a1e5332ce0f5c3668f840e4a87bc5088592854f920346f0ea93fb023cd2c56da13805d2972c0d4a6
+EBUILD homeassistant-full-9999.ebuild 90587 BLAKE2B 15b39eb8374faed01586257fea07f5d51f3958560c69d9fdc2d2baa2f9a5824492eb869b9ea29dfdd8bbdc48e9ede2a371cc594d648bb870b2b4600702644690 SHA512 19599d18b316007e91e6f72d2469a42cc7223c59af9bd62764d3455c1245a02e98751498ad9f20ac69ec54f5dc7a77c8027bd0b912ec42fd3b11e97bddc936ea
+MISC genebuild.py 21212 BLAKE2B d2a1e731f2d1011fa140b9c3cae099e25698b17420dc26ea144be8f1f395a5dc24c8454fa0d5c77b5718c7deeb404bab29e5e1e118d7fc08de88d1fc6eb17ce5 SHA512 7b680cf09fbcbcb7bb2fc8623b5e504b6f4e106390d5dad332b3c9018b9936b63a0bfa2bac93eb16931329717a93722fbb979fb08565367a25e1ec12ff6905c2
+MISC genebuild.sh 20748 BLAKE2B d591337934d0cbf15602c349c02ee4ddfa94daaab02853ec0073efa1c4987f4425fd7c49ef064b2077bc06412e2b9427be086beeb41c5378ce9e0aace91436c2 SHA512 2b7b9100747b8f575e3e9e1396c814f2290f3354e9ee9849e9d3f4a9f96b724d9702dd98839da0bce19710a8076e29077ec7a6e7e2725d537337d56f85cd808c
+MISC metadata.xml 96606 BLAKE2B e2b05df0a2b9d507dc061a780afb9769bec9f5a152c25d32800d1d0477de38704b68a187178814577dbacf4bbf02f86d62cf90f62390e4a738c232c6c672a39e SHA512 d32c492dd8f4e56973f26c27bb1784cb1273e17b6a93e22d089b5afa129f79fb9c054d9c14b115e5bdb83603d74cda1207a82b6dea9b31d1b2203f3beb2ca2a7
+MISC test.sh 952 BLAKE2B 15c3ca304b9de0fe03a15511c06fbef6fb0778c2566a18f4045c6c77546a933384374161f4c2185e00778e745b0fdc8a5f8ab20091f82fbfb1e9a99640ce9888 SHA512 d1e2e05d54ba946b82926edeb8faf2224560f6aa27a2fb70733208acff0162f2f675d131df26c2e5e63a55f9692a4c2e2ccd779fbf03319fd8144475dbc28465

app-misc/homeassistant-full/files/genebuild_2024.10.2.patch

@@ -0,0 +1,272 @@
+--- a/core-2024.10.2/homeassistant/package_constraints.txt	2024-10-04 19:33:37.000000000 +0200
++++ b/core-2024.10.2/homeassistant/package_constraints.txt	2024-10-13 10:21:48.027841292 +0200
+@@ -167,7 +167,7 @@
+ dacite>=1.7.0
+ 
+ # Musle wheels for pandas 2.2.0 cannot be build for any architecture.
+-pandas==2.1.4
++#pandas==2.1.4
+ 
+ # chacha20poly1305-reuseable==0.12.x is incompatible with cryptography==43.0.x
+ chacha20poly1305-reuseable>=0.13.0
+--- a/homeassistant-2024.10.2/homeassistant/package_constraints.txt        2024-10-04 19:33:37.000000000 +0200
++++ b/homeassistant-2024.10.2/homeassistant/package_constraints.txt        2024-10-13 10:21:48.027841292 +0200
+@@ -167,7 +167,7 @@
+ dacite>=1.7.0
+
+ # Musle wheels for pandas 2.2.0 cannot be build for any architecture.
+-pandas==2.1.4
++#pandas==2.1.4
+
+ # chacha20poly1305-reuseable==0.12.x is incompatible with cryptography==43.0.x
+ chacha20poly1305-reuseable>=0.13.0
+
+--- a/core-2024.10.2/requirements_all.txt	2024-10-11 18:25:02.000000000 +0200
++++ b/core-2024.10.2/requirements_all.txt	2024-10-13 20:44:30.782824454 +0200
+@@ -100,7 +100,7 @@
+ PyTurboJPEG==1.7.5
+ 
+ # homeassistant.components.vicare
+-PyViCare-neo==0.3.0
++PyViCare==2.34.0
+ 
+ # homeassistant.components.xiaomi_aqara
+ PyXiaomiGateway==0.14.3
+@@ -183,7 +183,7 @@
+ 
+ # homeassistant.components.ambient_network
+ # homeassistant.components.ambient_station
+-aioambient==2024.08.0
++aioambient==2024.8.0
+ 
+ # homeassistant.components.apcupsd
+ aioapcaccess==0.4.2
+@@ -252,7 +252,7 @@
+ aiogithubapi==24.6.0
+ 
+ # homeassistant.components.guardian
+-aioguardian==2022.07.0
++aioguardian==2022.7.0
+