dev-python/pymodbus: add 3.7.4

Closes: #4388
Signed-off-by: Andreas Billmeier <b@edevau.net>

DOMAINTABLE.md

@@ -11,6 +11,7 @@
 |aemet| AEMET OpenData meteorological data|N|N|Y|2021.3|
 |aftership|The aftership platform allows one to track deliveries by AfterShip|N|Y|Y|0.85|
 |agent_dvr|Agent DVR is a free* software DVR solution|N|Y|Y|0.110|
+|airgradient|The AirGradient integration will fetch data from your AirGradient devices|N|N|Y|2024.6.0b4|
 |airly|Uses the Airly web service as a source for air quality data|Y|Y|Y||
 |airnow|AirNow web service as a source for air quality data|N|N|Y|2021.2|
 |airq|integrating the sensors provided by your air-Q device|N|N|Y|2022.12.0|
@@ -39,6 +40,7 @@
 |android_ip_webcam|The android_ip_webcam integration turns any Android phone or tablet into a netwo|Y|Y|Y|0.40|
 |anova|allows you to control Anova sous vides with Wi-Fi capability|N|N|Y|2023.5.2|
 |anthemav|Both Anthem’s current and last generation of A/V Receivers and Processors suppor|N|Y|Y|0.37|
+|anthropic|adds a conversation agent powered by Anthropic|N|N|Y|2024.9.2|
 |aosmith|control a compatible A. O. Smith iCOMM-enabled water heater from Home Assistant|N|N|Y|2024.1.0b7|
 |apache_kafka|Sends all state changes from Home Assistant to a Apache Kafka topic|N|Y|Y|0.97|
 |apcupsd|Query Apcupsd status information from Home Assistant|N|Y|Y|0.13|
@@ -47,6 +49,8 @@
 |apprise|The Apprise service is an all-in-one solution to open up Home Assistant|N|Y|Y|0.101|
 |aprilaire|The Aprilaire integration allows you to control an Aprilaire thermostat|N|N|Y|2024.3.0|
 |aprs|Tracker integration connects to the APRS-IS|N|N|Y|0.95|
+|apsystems|allows you to read the data from your APsystems EZ1 microinverter|N|N|Y|2024.6.0b4|
+|aquacell|monitor your AquaCell device in Home Assistant|N|N|Y|2024.9.2|
 |aqualogic|Provides connectivity to a Hayward/Goldline AquaLogic/ProLogic pool controller|N|N|Y|0.80|
 |aquostv|The aquostv platform allows you to control a Sharp Aquos TV|N|Y|Y|0.35|
 |aranet|Integrates Aranet devices into Home Assistant|N|N|Y|2022.12.0|
@@ -66,11 +70,13 @@
 |aurora|The aurora platform uses the NOAA Aurora Forecast service to let you know if an |N|N|Y|0.39|
 |aurora_abb_powerone|This implements a direct RS485 connection to a solar inverter in the PVI-3.0/3.6|N|Y|Y|0.96|
 |aussie_broadband|displays various service metrics using the Aussie Broadband API|N|N|Y|2022.2.0b1|
+|autarco|gather data from the cloud API of Autarco|N|N|Y|2024.9.2|
 |avea|Library for Elgato Avea bulbs|N|Y|Y|0.97|
 |avion|Support for the Avi-on Bluetooth dimmer switch Avi-on|N|Y|Y|0.37|
 |awair|Library to integrate the Awair GraphQL API into Home Assistant|N|Y|Y|0.84|
 |aws|Interact with Amazon Web Services|N|N|Y|0.91|
 |axis|Communicating with newer devices from Axis Communications|Y|Y|Y||
+|azure_data_explorer|allows you to forward events to Azure Data Explorer|N|N|Y|2024.6.0b4|
 |backup|allows you to create and download backups for your Home Assistant Core|Y|Y|Y|2022.4.0b0|
 |baf|Integrates Big Ass Fans devices into Home Assistant|N|N|Y|2022.6.0b0|
 |baidu|Text-to-speech platform uses Baidu TTS engine to read a text with natural soundi|N|Y|Y|0.59|
@@ -105,16 +111,19 @@
 |broadlink|Allows you to interact with Broadlink remote control devices|N|Y|Y|0.35|
 |brottsplatskartan|brottsplatskartan sensor allows one to track reported incidents|N|Y|Y|0.85|
 |brunt|The brunt platform allows one to control Blind Engines by Brunt|N|Y|Y|0.75|
+|bryant_evolution|lets you control Bryant Evolution HVAC systems|N|N|Y|2024.9.2|
 |bsblan|This integration integrates BSBLan device into Home Assistant|N|Y|Y||
 |bthome|Integrates BTHome BLE devices into Home Assistant|N|N|Y|2022.9.0b3|
 |bt_home_hub_5|Offers presence detection by looking at connected devices to a BT Home |N|Y|Y|0.22|
 |bt_smarthub|Presence detection by looking at BT Smart Hub based routers|N|Y|Y|0.82|
 |buienradar|Integrate buienradar weather data into Home Assistant|N|Y|Y|0.47|
 |caldav|Integrate a CalDAV (RFC4791) calendar in Home Assistant|Y|Y|Y|0.60|
+|cambridge_audio|control all receivers and streamers that support the StreamMagic app|N|N|Y|2024.10.1|
 |camera|The camera integration allows you to use IP cameras with Home Assistant|Y|Y|Y||
 |canary|Allows you to integrate your Canary devices from Home Assistant|N|Y|Y|0.60|
 |cast|Let Home Assitant talk to Google Chromecast|Y|Y|Y||
 |ccm15|integrate Midea CCM15 devices in Home Assistant.|N|N|Y|2024.1.0b7|
+|chacon_dio|connected home devices that can be controlled via RF 433 MHz or Wi-Fi|N|N|Y|2024.9.2|
 |channels|Allows you to control Channels from Home Assistant|N|N|Y|0.65|
 |circuit|Unify Circuit platform allows you to send notifications|N|N|Y|0.111|
 |cisco_ios|Presence detection scanner for Cisco IOS devices|N|N|Y|0.33|
@@ -142,6 +151,7 @@
 |daikin|Integrate Daikin wireless controllers into Home Assistant|N|Y|Y|0.59|
 |danfoss_air|The danfoss_air integration accesses information from your Danfoss Air HRV unit|N|N|Y|0.87|
 |datadog|The datadog integration sends all state changes to Datadog using a Datadog Agent|N|N|Y|0.45|
+|deako|control your Deako devices from Home Assistant|N|N|Y|2024.10.1|
 |debugpy|Useful in testing changes on a local development install|N|N|Y||
 |deconz|Add deCONZ ConBee/RaspBee Zigbee gateways to Home Assistant|N|Y|Y||
 |decora|Support Decora Bluetooth dimmer switch Leviton from Home Assistant|N|N|Y|0.37|
@@ -177,6 +187,7 @@
 |dremel_3d_printer|monitor your Dremel 3D printer and its progress with your Home Assistant|N|N|Y|2023.7.2|
 |drop_connect|provides connectivity with DROP smart water system devices via a local MQTT API|N|N|Y|2024.1.0b7|
 |dsmr|Dutch Smart Meters which comply to DSMR (Dutch Smart Meter Requirements)|N|N|Y||
+|duke_energy|get energy information from Duke Energy|N|N|Y|2024.10.1|
 |dunehd|control a Dune HD media player|N|Y|Y|0.34|
 |duotecno|used to control Duotecno nodes in Home Assistant|N|N|Y|2023.10.1|
 |dwd_weather_warnings|dwd_weather_warnings sensor platform uses DWD for  warnings|Y|Y|Y|0.51|
@@ -201,6 +212,7 @@
 |egardia|Control an Egardia/Woonveilig alarm control panel from Home Assistant|N|N|Y|0.65|
 |electrasmart|control Electra Air Ait COnditioners with HA|N|N|Y|2023.7.2|
 |electric_kiwi|uses the official Electric Kiwi API to show and select the hour of free power|N|N|Y|2023.10.1|
+|elevenlabs|support for ElevenLabs as text-to-speech with natural sounding voices|N|N|Y|2024.9.2|
 |elgato|The Elgato Key Light sets the bar for high-end studio lighting|N|N|Y||
 |eliqonline|Integrate your ELIQ Online smart meter information|N|N|Y|0.10|
 |elkm1|Elk-M1 is a home security and automation controller|N|N|Y|0.81|
@@ -277,6 +289,7 @@
 |fritzbox_callmonitor|monitors the call monitor exposed by AVM FRITZ!Box routers on TCP port 1012|N|Y|Y||
 |fronius|Add (very basic) Support for Fronius Symo JSON Api to Home Assistant|Y|Y|Y|0.96|
 |frontier_silicon|Support for Internet Radios based on the Frontier Silicon chipset|N|N|Y|0.40|
+|fujitsu_fglair|provides support for Fujitsu heat pumps and air conditioners|N|N|Y|2024.9.2|
 |fully_kiosk|Fully Kiosk Browser control in Home Assistant|N|N|Y|2022.9.0b3|
 |futurenow|Allows you to use P5 FutureNow relay/dimmer units as lights|N|N|Y|0.75|
 |fyta|uses the open API of FYTA to obtain the data from your plant sensors|N|N|Y|2024.4.0b3|
@@ -298,6 +311,7 @@
 |gitter|Sensor allows one to monitor a Gitter.im chatroom for unread messages|N|N|Y|0.47|
 |glances|Allows you to monitor the system information provided by the Glances API|Y|Y|Y|0.7.3|
 |gntp|Growl Notification Protocol: sending and receiving notifications|N|N|Y||
+|go2rtc|connects to a go2rtc instance and provides a WebRTC prox|N|N|Y|2024.11.0b0|
 |goalfeed|Use your Goalfeed account to trigger events in Home Assistant|N|N|Y||
 |goalzero|Access Goal Zero REST Api from Home Assistant|N|N|Y||
 |gogogate2|Control Gogogate2-Enabled garage doors from Home Assistant|N|Y|Y|0.67|
@@ -308,6 +322,7 @@
 |google_generative_ai_conversation|adds a conversation agent powered by Google Generative AI in Home Assistant|N|N|Y|2023.7.2|
 |google_mail|allows you to connect your Google Mail and set an email auto-response|N|N|Y|2023.2.1|
 |google_maps|google_maps platform allows you to detect presence|N|N|Y|0.67|
+|google_photos|upload photos to your Google Photos using Home Assistant|N|N|Y|2024.10.1|
 |google_pubsub|Send events to Google Cloud Pub/Sub from Home Assistant|N|N|Y|0.88|
 |google_sheets|allows you to connect your Google Drive to Home Assistant|N|N|Y|2022.10.0|
 |google_tasks|allows you to connect your Google Tasks to Home Assistant|N|N|Y|2023.11.0b2|
@@ -358,6 +373,7 @@
 |huisbaasje|Huisbaasje smart energy meters|N|N|Y|2021.2|
 |hunterdouglas_powerview|integrate your Hunter Douglas PowerView devices|N|N|Y|0.15|
 |husqvarna_automower|integration provides connectivity with Husqvarna Automowers lawn mowers|N|N|Y|2024.3.0|
+|husqvarna_automower_ble|Husqvarna Automowers lawn mowers via a local Bluetooth connection|N|N|Y|2024.11.0b0|
 |huum|Integrates Huum saunas into Home Assistant|N|N|Y|2024.2.1|
 |hvv_departures|departures of busses, trains and ferries in Hamburg|N|N|Y|0.112|
 |hydrawise|communicate with Hunter Wi-Fi irrigation controllers|N|Y|Y|0.71|
@@ -377,6 +393,7 @@
 |image|handle image assets in Home Assistant|N|N|Y||
 |image_upload|handle image assets in Home Assistant|N|Y|Y|2023.1.1|
 |imap|observing your IMAP server and reporting the amount of unread emails|N|Y|Y|0.25|
+|imgw_pib|hydrological data from Institute of Meteorology and Water Management - Poland|N|N|Y|2024.6.0b4|
 |improv_ble|allows connecting devices implementing Improv via BLE to Wi-Fi|N|N|Y|2023.11.0b2|
 |incomfort|client for Intergas InComfort/InTouch Lan2RF systems|N|Y|Y|0.93|
 |influxdb|transfer sensor data to a local InfluxDB database|Y|Y|Y|0.9|
@@ -386,13 +403,19 @@
 |intesishome|communications with IntesisHome Smart AC Controllers|N|Y|Y|0.104|
 |iota|IOTA is a new blockless distributed ledger|N|N|Y||
 |iotawatt|Integration for the IoTaWatt Open WiFi Electricity Monitor|N|N|Y|2021.9.0b6|
+|iotty|integrate iotty devices into Home Assistant|N|N|Y|2024.9.2|
 |iperf3|iperf3 sensor integration allows you to measure network bandwidth|N|N|Y|0.71|
 |ipma|ipma weather platform|N|Y|Y|0.72|
 |ipp|read current data from your networked printer|N|Y|Y|0.108|
 |iqvia|collects allergy, asthma and disease information (based on a U.S. ZIP code)|N|N|Y||
 |irish_rail_transport|will give you the time until the next two departures|N|N|Y|0.57|
+|iron_os|connects Home Assistant with PINE64’s Pinecil V2 soldering irons|N|N|Y|2024.9.2|
+|isal|Intelligent Storage Acceleration, is used for accelerating aiohttp|Y|Y|Y|2024.6.0b4|
+|iskra|connect Iskra energy meters and power quality analyzers to Home Assistant|N|N|Y|2024.10.1|
 |islamic_prayer_times|integration displays the various prayer times for Muslims as sensors|N|Y|Y|0.85|
+|israel_rail|give you the next three departure times from Israel rail|N|N|Y|2024.9.2|
 |iss|know if the station is above your home location|N|N|Y||
+|ista_ecotrend|import your monthly meter readings from the ista EcoTrend service|N|N|Y|2024.9.2|
 |isy994|controller that is capable of controlling Insteon and X10 devices|N|N|Y||
 |itach|control IR devices with a Global Caché iTach Device and GC-100 devices|N|N|Y|0.39|
 |izone|control of a local iZone ducted reverse-cycle climate control device|N|N|Y|0.100|
@@ -414,6 +437,7 @@
 |kira|main integration to integrate Keene Electronics IR over IP Kira modules|N|N|Y|0.45|
 |kiwi|open your KIWI Smart Locks and Smart Entry Devices|N|N|Y|0.72|
 |kmtronic|IP-connected relays|N|N|Y|2021.3|
+|knocki|receive events for the triggers set up from your Knocki devices|N|N|Y|2024.9.2|
 |knx|Asynchronous Library for the KNX protocol|Y|Y|Y||
 |kodi|control a Kodi multimedia system|Y|Y|Y||
 |konnected|connect wired sensors and switches to a Konnected Alarm Panel|N|N|Y|0.70|
@@ -433,8 +457,10 @@
 |ld2410_ble|Integrates LD2410 BLE sensors from Hi-Link|N|N|Y|2023.2.1|
 |leaone|Integrates LeaOne health devices into Home Assistant|N|N|Y|2024.2.1|
 |led_ble|Integrates multiple brands of Bluetooth Low Energy LED devices into Home Assista|N|N|Y|2022.9.0b3|
+|lektrico|ntegration integrates your Lektrico Charging Station|N|N|Y|2024.10.1|
 |lg_netcast|allows you to control a LG Smart TV running NetCast 3.0|N|N|Y|0.20|
 |lg_soundbar|allows you to control LG Soundbars from Home Assistant|N|N|Y|0.81|
+|lg_thinq|connect LG ThinQ devices to Home Assistant|N|N|Y|2024.11.0b0|
 |lidarr|The Lidarr integration pulls data from a given Lidarr instance|N|N|Y|2022.10.0|
 |life360|detect presence using the unofficial API of Life360|N|N|Y|0.95|
 |lifx|The lifx integration allows you to integrate your LIFX into Home Assistant|N|Y|Y|0.81|
@@ -442,6 +468,7 @@
 |lightwave|WiFi link for controlling Lightwave lights, switches and TRVs|N|N|Y|0.84|
 |limitlessled|control your LimitlessLED lights from within Home Assistant|N|N|Y||
 |linear_garage_door|lets you control Linear garage doors through Home Assistant|N|N|Y|2023.12.1|
+|linkplay|control various media players based on the LinkPlay protocol|N|N|Y|2024.9.2|
 |linode|allows you to access the information about your Linode systems|N|Y|Y|0.57|
 |linux_battery|sensor platform is using the information stored in /sys/class/power_supply/|N|N|Y|0.28|
 |litejet|allows a computer to control the system via LiteJet’s third party protocol|N|N|Y||
@@ -462,6 +489,7 @@
 |lw12wifi|Library to control the Lagute LW-12 WiFi LED controller|N|N|Y|0.71|
 |lyft|Unofficial Lyft Rides API Python SDK|N|N|Y||
 |lyric|Honeywell Lyric thermostat platform|N|N|Y|2021.3|
+|madvr|automation and control of madVR Envy devices|N|N|Y|2024.9.2|
 |magicseaweed|Provides API wrapper to magicseaweed.com.|N|N|Y||
 |mailgun|A simple mailgun client - pymailgun fork with Python 3 support|N|N|Y|0.38|
 |mariadb|WIP: set dependencies for mariadb-connector-python|Y|Y|Y|2022.6.3|
@@ -471,6 +499,7 @@
 |matter|control Matter devices on your local WiFi or Thread network|Y|Y|Y|2022.12.0|
 |maxcube|eQ-3 ELV MAX Cube Python API|Y|Y|Y|0.40|
 |mcp23017|base for all related mcp23017 platforms in Home Assistant|N|N|Y||
+|mealie|The Mealie integration will fetch data from your Mealie instance|N|N|Y|2024.9.2|
 |meater|communication with the Meater Temperature Probe from Apption Labs|N|N|Y|2022.5.0b0|
 |medcom_ble|International Medcom Bluetooth-enabled radiation monitors|N|N|Y|2023.10.1|
 |mediaroom|control a Mediaroom Set-Top Box (STB) from Home Assistant|N|N|Y|0.63|
@@ -500,7 +529,9 @@
 |modem_callerid|Uses an available modem for collecting caller ID information|N|N|Y||
 |modern_forms|Asynchronous Python client for Modern Forms fans|N|N|Y|2021.7|
 |moehlenhoff_alpha2|allows you to control a Möhlenhoff Alpha 2 temperature control system|N|N|Y|2022.3.0b3|
+|monarch_money|a personal finance aggregation and budgeting service|N|N|Y|2024.10.1|
 |monoprice|Python API for talking to Monoprice 6-zone amplifier|N|N|Y|0.56|
+|monzo|allows you to connect your Monzo bank accounts to Home Assistant|N|N|Y|2024.6.0b4|
 |mopeka|Integrates Mopeka devices into Home Assistant|N|N|Y|2023.2.1|
 |mosquitto|Set a runtime dependency for Mosquitto MQTT broker|Y|Y|Y|2022.8.3|
 |motionblinds_ble|adds support for Motionblinds Bluetooth motors|N|N|Y|2024.4.0b3|
@@ -511,6 +542,7 @@
 |mqtt|install MQTT Broker and dependencies|Y|Y|Y||
 |msteams|send notifications from Home Assistant to a team channel in Microsoft Teams|N|N|Y|0.101|
 |mullvad|Mullvad VPN integration pulls Mullvad VPN status information|N|N|Y|2021.3|
+|music_assistant|connect Home Assistant to a Music Assistant Server|N|N|Y|2024.11.0b0|
 |mutesync|mutesync integration for Home Assistant connects to the mütesync virtual button|N|N|Y|2021.5|
 |mvglive|departure times bus, tram, subway, train of Munich public transport network|N|N|Y|0.42|
 |mychevy|communicates with the my.chevrolet website using the javascript API|N|N|Y||
@@ -542,6 +574,7 @@
 |nextdns|allows you to monitor NextDNS statistics|N|N|Y|2022.8.1|
 |nfandroidtv|Notifications for Android TV and Notifications for Fire TV|Y|Y|Y||
 |nibe_heatpump|control and monitor Nibe Heat Pumps in Home Assistant|N|N|Y|2022.10.0|
+|nice_go|control Nice G.O. garage doors through Home Assistant|N|N|Y|2024.9.2|
 |nightscout|allows you to view your CGM data from Nightscout|N|N|Y|0.115|
 |niko_home_control|platform allows you to integrate your Niko Home Control|N|N|Y|0.82|
 |nilu|An API client for getting pollution data from NILU sensor stations in Norway|N|N|Y|0.87|
@@ -562,6 +595,7 @@
 |nut|monitor a UPS (battery backup) by using data from a NUT (Network UPS Tools)|N|Y|Y||
 |nws|uses the National Weather Service web API|N|Y|Y|0.99|
 |nx584|NX584/NX8E Interface Library and Server|N|Y|Y|0.13|
+|nyt_games|The NYT Games integration fetches data about your progress|N|N|Y|2024.10.1|
 |nzbget|monitor and control your downloads with NZBGet|N|N|Y|0.17|
 |oasa_telematics|bus and trolley arrival times for Greek public transport for Athens|N|N|Y|0.92|
 |obihai|view the call status for your Obihai devices|N|N|Y|0.99|
@@ -603,6 +637,7 @@
 |owntracks|OwnTracks: track your location and send it directly to Home Assistant|Y|Y|Y|0.7.4|
 |ozw|Open Zwave MQTT|M|M|Y||
 |p1_monitor|The P1 Monitor integration integrates the P1 Monitor API platform|N|N|Y|2021.9.0b1|
+|palazzetti|integrates the Palazzetti stoves equipped with a Connection Box|N|N|Y|2024.11.0b0|
 |panasonic_bluray|allows you to control a Panasonic Blu-Ray player|N|N|Y|0.83|
 |panasonic_viera|panasonic_viera platform allows you to control a Panasonic Viera TV|N|Y|Y|0.17|
 |pandora|Pandora account, you can control it from Home Assistant with this media player|N|N|Y|0.22|
@@ -687,6 +722,7 @@
 |risco|This integration connects with Risco Alarms over Risco Cloud|N|N|Y|0.115|
 |rituals_perfume_genie|monitor your Rituals perfume diffusers|N|N|Y|2021.3|
 |rmvtransport|departure time of bus, tram, subway, train in Rhein-Main area public transport|N|N|Y|0.76|
+|roborock|"supported_by": "xiaomi_miio"|Y|Y|Y|2022.11.0b3|
 |rocketchat|allows you to send messages to your Rocket.Chat instance from Home Assistant|N|N|Y|0.56|
 |roku|add support for Roku players|N|Y|Y||
 |romy|The ROMY integration allows you to control your ROMY vacuum robot|N|N|Y|2024.2.1|
@@ -725,6 +761,7 @@
 |sensirion_ble|Integrates sensors talking Sensirion’s BLE protocol into Home Assistant|N|N|Y|2022.12.0|
 |sensorpro|Integrates SensorPro devices into Home Assistant|N|N|Y|2022.9.0b3|
 |sensorpush|Integrates SensorPush devices into Home Assistant|N|N|Y|2022.8.1|
+|sensoterra|communicates with your Sensoterra soil moisture probes using|N|N|Y|2024.10.1|
 |sentry|The free Sentry account allows 5000 events per month|N|N|Y||
 |senz|allows you to control and monitor your nVent RAYCHEM SENZ-WIFI thermostats|N|N|Y|2022.5.0b0|
 |serial|use data provided by a device connected to the serial port of the system|N|N|Y|0.56|
@@ -741,6 +778,7 @@
 |sia|provides integration with several alarm systems that implement the SIA Protocol|N|N|Y|2021.6|
 |sighthound|Detect people in camera images using Sighthound Cloud|N|N|Y|0.105|
 |signal_messenger|add Support for Moxie's Signal API|Y|Y|Y|0.104|
+|simplefin|share read-only financial data|N|N|Y|2024.9.2|
 |simplepush|deliver notifications from Home Assistant to your Android device|N|N|Y|0.29|
 |simplisafe|integrates SimpliSafe home security (V2 and V3) systems|N|Y|Y||
 |sinch|The sinch platform uses Sinch to deliver notifications from Home Assistant|N|N|Y|0.101|
@@ -760,6 +798,7 @@
 |smarty| lets you control Salda Smarty ventilation units from Home Assistant|N|N|Y|0.95|
 |smart_meter_texas|allows Texas residents to integrate their electric meters into Home Assistant|N|N|Y|0.115|
 |smhi|support for the SMHI.se web service as a source for meteorological data|N|N|Y|0.81|
+|smlight|allows users to monitor and manage their SLZB-06x devices|N|N|Y|2024.9.2|
 |sms|allows having a local execution SMS notification via Gammu|N|N|Y|0.105|
 |snapcast|The snapcast platform allows you to control Snapcast from Home Assistant|N|N|Y|0.13|
 |snmp|Presence Detection, Sensor, Switch via SNMP|Y|Y|Y|0.57|
@@ -835,6 +874,7 @@
 |tellstick|integrates TellStick devices into Home Assistant|N|N|Y||
 |temper|get the current temperature from a TEMPer device|N|N|Y||
 |tesla|integration with the Tesla cloud service|N|Y|Y||
+|tesla_fleet|exposes various sensors from Tesla vehicles and energy sites|N|N|Y|2024.9.2|
 |tesla_wall_connector|allows you to integrate your Gen 3 Tesla Wall Connector with Wi-Fi|N|N|Y|2021.12.0b0|
 |teslemetry|commands and sensors from the Tesla vehicles connected to a Teslemetry subscript|N|N|Y|2024.2.1|
 |tessie|control Tesla vehicles connected to your Tessie account from HA|N|N|Y|2024.1.0b7|
@@ -858,6 +898,7 @@
 |toon|client for the Quby ToonAPI|N|Y|Y|0.56|
 |totalconnect|provides connectivity with the Honeywell TotalConnect alarm systems|N|Y|Y|0.42|
 |touchline|lets you control ROTH Touchline floor heating thermostats|N|N|Y|0.61|
+|touchline_sl|control Roth Touchline SL underfloor heating systems|N|N|Y|2024.9.2|
 |tplink|control your TP-Link Smart Home Devices|Y|Y|Y|0.89|
 |tplink_lte|allows you to observe and control TP-Link LTE routers|N|N|Y|0.83|
 |tplink_omada|allows you to control your TP-Link Omada SDN Devices|N|N|Y|2023.3.0b3|
@@ -874,6 +915,7 @@
 |transport_nsw|gets next departure from Transport NSW stop for bus, train, light rail or ferry|N|N|Y|0.81|
 |travisci|integrate the test build results reported by Travis-CI working|N|N|Y|0.56|
 |trend|sensors which show the trend of numeric state orstate_attributes|N|N|Y|0.28|
+|triggercmd|allows you to run commands on computers via TRIGGERcmd with Home Assistant|N|N|Y|2024.10.1|
 |tts|Audio metadata tag reader and writer implemented in pure Python|N|Y|Y||
 |tuya|integrate all Tuya Smart related platforms|N|Y|Y||
 |twentemilieu|allows you to track the next scheduled waste pickups by Twente Milieu|N|N|Y||
@@ -935,6 +977,7 @@
 |weatherkit|obtains current weather and forecasts (hourly and daily) from Apple Weather|N|N|Y|2023.10.1|
 |webmin|provides sensors for monitoring the CPU and memory usage of your server|N|N|Y|2024.3.0|
 |webostv|allows you to control a LG webOS Smart TV|N|Y|Y|0.18|
+|weheat|display your Weheat devices through Home Assistant|N|N|Y|2024.10.1|
 |wemo|discover and control WeMo devices|Y|Y|Y||
 |whirlpool|integrates Whirlpool 6th Sense Live appliances|N|N|Y|2021.10.0b2|
 |whois|perform daily WHOIS lookups|Y|Y|Y||
@@ -945,6 +988,7 @@
 |withings|add support for Withings Health API|N|Y|Y|0.99|
 |wiz|allows you to control your WiZ lights and smart sockets|N|N|Y|2022.3.0b3|
 |wled|add support for Aircookie's WLED|Y|Y|Y||
+|wmspro|WMS WebControl pro integration allows you to integrate WAREMA devices|N|N|Y|2024.10.1|
 |wolflink|uses the Wolf Smart-Set for your heating system status|N|N|Y|0.114|
 |workday|generating country, province and state specific sets of holidays on the fly|Y|Y|Y|0.41|
 |ws66i|Control the Soundavo Whole-Home Audio Amplifier via local network|N|N|Y|2022.6.0b0|
@@ -957,6 +1001,7 @@
 |xiaomi_tv|The xiaomi_tv platform allows you to control a Xiaomi TV|N|Y|Y|0.64|
 |xmpp|Python 3 library for XMPP|N|N|Y||
 |xs1|get and set values of the EZcontrol XS1 Gateway|N|Y|Y|0.88|
+|yale|integrate your Yale devices in Home Assistant|N|N|Y|2024.9.2|
 |yalexs_ble|Integrates Yale Access Bluetooth devices into Home Assistant|N|N|Y|2022.9.0b3|
 |yale_smart_alarm|Yale Smart Alarm systems and Smart Hub through Yale’s API|N|N|Y|0.78|
 |yamaha|Library for Yamaha RX-* Receivers|Y|Y|Y|0.16|

README.md

@@ -119,18 +119,18 @@ Since homeassistant-0.115.3 the **Main Ebuild** is released in three different s
 
 [![emerge ha-min](https://github.com/onkelbeh/HomeAssistantRepository/actions/workflows/emerge-min.yml/badge.svg)](https://github.com/onkelbeh/HomeAssistantRepository/actions/workflows/emerge-min.yml)
 
-These are the USE Flags I use in production myself. All will compile fine and are extensively tested in every release, a daily compilation test is run at Github, big thanks to @antonfischl1980, it currently holds **106** USE Flags.
+These are the USE Flags I use in production myself. All will compile fine and are extensively tested in every release, a daily compilation test is run at Github, big thanks to @antonfischl1980, it currently holds **108** USE Flags.
 
 ### `app-misc/homeassistant`
 
 [![emerge ha-med](https://github.com/onkelbeh/HomeAssistantRepository/actions/workflows/emerge-med.yml/badge.svg?branch=master)](https://github.com/onkelbeh/HomeAssistantRepository/actions/workflows/emerge-med.yml)
 
-The Ebuild we have since `0.97.0`, as soon as I know that at least one user is actively using a component, it will be added. These all compile fine, but some version conflicts could occure, a daily compilation test is run at Github, big thanks to @antonfischl1980, It currently holds **299** USE Flags.
+The Ebuild we have since `0.97.0`, as soon as I know that at least one user is actively using a component, it will be added. These all compile fine, but some version conflicts could occure, a daily compilation test is run at Github, big thanks to @antonfischl1980, It currently holds **301** USE Flags.
 
 ### `app-misc/homeassistant-full`
 
 WARNING: This one currently breaks (caused by shell limitations) emerge with an 'Argument list too long' error. It compiles with a [kernel hack](https://git.edevau.net/onkelbeh/HomeAssistantRepository/issues/190#issuecomment-1002). Thanks to @gcampagnoli.
-This Ebuild contains USE Flags for (nearly) all components of Home Assistant with external dependencies. Most components compile, but these are too many (for me) to run tests for all of them on a regular schedule. It holds **982** USE Flags.
+This Ebuild contains USE Flags for (nearly) all components of Home Assistant with external dependencies. Most components compile, but these are too many (for me) to run tests for all of them on a regular schedule. It holds **1027** USE Flags.
 
 A list of all components aka USEFlags is generated with every release [DOMAINTABLE.md](DOMAINTABLE.md)
 
@@ -147,8 +147,8 @@ Best you start using the `app-misc/homeassistant-min` Ebuild. If you have it run
 ## Some thoughts
 * Be aware that all dependent libraries could be marked as stable here as soon as they compile. Outside HA dependencies except of portage are not tested.
 * Since I use Gentoo mostly on servers, I do not use systemd, one reason to run Gentoo is that you are NOT forced to run this crap. Beginning homeassistant-2021.2.0, handling for systemd was added by request, thanks to @Tatsh for help.
-* I use an own profile based on "amd64/23.0/split-usr/no-multilib", planning to move to merged-usr.
-* python-3.12.3 is set as default target.
+* I use an own profile based on merged-usr "amd64/23.0/no-multilib".
+* python-3.12.9 is set as default target.
 
 # Bigger Changes
 
@@ -371,13 +371,13 @@ I run Home Assistant on a virtual X64 box, 4GB RAM, 3 Cores of an older Xeon E5-
 ## My machines
 Currently I have three VM's running:
 ### Production
-Python 3.10.10_p3 / 3.11.2_p2
+Python 3.12.3_r1
 4 GB RAM, 3 cores of a Intel(R) Xeon(R) Silver 4114 CPU @ 2.20GHz
 ### Dev / Test
-Python 3.10.10_p3 / 3.11.2_p2
+Python 3.12.3_r1
 4 GB RAM, 3 cores of a Intel(R) Xeon(R) Silver 4114 CPU @ 2.20GHz
 ### Dev / Test2
-Python 3.11.2_p2
+Python 3.13
 4 GB RAM, 3 cores of a Intel(R) Xeon(R) Silver 4114 CPU @ 2.20GHz
 
 ## Hardware I use
@@ -606,56 +606,57 @@ A daily compile test is run at Github with Python 3.9 to catch general faults. E
 
 ## Licenses
 This repository itself is released under GPL-3 (like most Gentoo repositories), all work on the depending components under the licenses they came from. Perhaps you came here because I filed an issue at your component about a bad or missing license. It is easy to [assign a license](https://docs.github.com/en/communities/setting-up-your-project-for-healthy-contributions/adding-a-license-to-a-repository). During cleanups and license investigations I have been asked often which license to choose. I am not a lawyer, but I can offer the following table, counted over this repository, perhaps this helps your decision. If a package has more than one license listed, all of them are counted.
-There are 1828 Ebuilds in total, 1817 of them have in total 1838 (42 different) licenses assigned.
+There are 2387 Ebuilds in total, 2369 of them have in total 2413 (43 different) licenses assigned.
 
 |License| Ebuilds using it|
 |-------|-----|
-|MIT|1051|
-|Apache-2.0|401|
-|GPL-3|107|
-|BSD|106|
-|LGPL-3|25|
-|GPL-2|23|
-|GPL-3+|14|
-|LGPL-3+|14|
-|BSD-2|13|
-|all-rights-reserved|13|
-|Unlicense|9|
-|PSF-2|7|
+|MIT|1356|
+|Apache-2.0|553|
+|GPL-3|149|
+|BSD|128|
+|GPL-2|30|
+|LGPL-3|23|
+|BSD-2|19|
+|GPL-3+|17|
+|LGPL-3+|17|
+|all-rights-reserved|15|
+|Unlicense|14|
+|PSF-2|12|
+|ISC|8|
+|AGPL-3|7|
 |MPL-2.0|6|
-|ISC|5|
-|EPL-1.0|4|
-|ZPL|3|
-|LGPL-2.1+|3|
-|AGPL-3|3|
+|LGPL-2.1+|6|
+|ZPL|4|
+|LGPL-2.1|4|
+|0BSD|3|
+|CC-BY-4.0|3|
+|PYTHON|3|
+|HPND|3|
+|EPL-1.0|3|
+|CC0-1.0|3|
+|EPL-2.0|3|
 |AGPL-3+|2|
 |LGPL-2+|2|
 |public-domain|2|
-|LGPL-2.1|2|
+|ElementTree|2|
 |BSD-4|2|
 |LGPL-2|2|
-|CC0-1.0|2|
-|0BSD|1|
-|CC-BY-4.0|1|
-|PYTHON|1|
 |BitstreamVera|1|
 |matplotlib|1|
 |OFL-1.1|1|
 |ECL-2.0|1|
 |Boost-1.0|1|
 |PSF-2.4|1|
-|ElementTree|1|
 |NEWLIB|1|
-|HPND|1|
 |CC-BY-NC-SA-3.0|1|
+|MPL-1.1|1|
 |CC-BY-NC-SA-4.0|1|
-|EPL-2.0|1|
 |GPL-2+|1|
 |GPL-2-with-linking-exception|1|
 
-(Last counted: 14/05/2024)
+(Last counted: 14/03/2025)
 
 I did my best to keep these clean. If a valid license was published on PyPI, it has been automatically merged. Otherwise I took it from GitHub or alternatively from comments/files in the source. Sometimes these differed and have been not unique. All license strings are adjusted to the list in `/usr/portage/gentoo/licenses/`. Some packages do not have any license published. In this case, Authors have been asked for clarification, some did not respond. Following the [official Gentoo Guide](https://devmanual.gentoo.org/general-concepts/licenses/index.html), these then were added with an `all-rights-reserved` license and `RESTRICT="mirror"` was set. Find the appropriate licenses referenced in the Ebuild files and in the corresponding homepages or sources.
 
 A big thanks goes to Iris for reviewing this README.
-Last updated: 14/05/2024
+Last updated: 14/03/2025

acct-group/gpio/Manifest

@@ -0,0 +1 @@
+EBUILD gpio-0.ebuild 149 BLAKE2B 3d48d41dbcf9acdfda3e3d81fefd5767aea861faeef65ea5b95caa414160e340303e9788f1444b2d1d9b7631d6d6d461b7aca2558b3f69b7bb26c893f73ca24c SHA512 5dd40eea1228c17d97955b872eec9d63cf4a3b80d19da23db6de9b8f566e1eb91e5495b98eaceaa18115af92ae1a0e354a09df1fa8d5c5642fd14b8cb35c3e87

acct-group/gpio/gpio-0.ebuild

@@ -0,0 +1,7 @@
+# Copyright 1999-2023 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+inherit acct-group
+ACCT_GROUP_ID=-1

acct-group/hydroqc2mqtt/Manifest

@@ -0,0 +1,2 @@
+EBUILD hydroqc2mqtt-0.ebuild 149 BLAKE2B 3d48d41dbcf9acdfda3e3d81fefd5767aea861faeef65ea5b95caa414160e340303e9788f1444b2d1d9b7631d6d6d461b7aca2558b3f69b7bb26c893f73ca24c SHA512 5dd40eea1228c17d97955b872eec9d63cf4a3b80d19da23db6de9b8f566e1eb91e5495b98eaceaa18115af92ae1a0e354a09df1fa8d5c5642fd14b8cb35c3e87
+MISC metadata.xml 397 BLAKE2B 77f11f2779e3c2147c1eabcd034c7a07fd32c004cfd8363104956e10ef3f2381a710aef0152e4ed6a598c9065aa0a7b2c3f63f739c67dcde061527a4bf030679 SHA512 5e0bcf6f8de4434343b44a0a4898184e933b1a069b31bffb58e16aab438a1937d2c7707f0afed50c7efd0f55d5633e26738e294c58ff44452b4dd1ede006ec91

acct-group/hydroqc2mqtt/hydroqc2mqtt-0.ebuild

@@ -0,0 +1,7 @@
+# Copyright 1999-2023 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+inherit acct-group
+ACCT_GROUP_ID=-1

acct-group/hydroqc2mqtt/metadata.xml

@@ -9,7 +9,4 @@
 		<email>proxy-maint@gentoo.org</email>
 		<name>Proxy Maintainers</name>
 	</maintainer>
-	<upstream>
-		<remote-id type="github">node-red/node-red</remote-id>
-	</upstream>
 </pkgmetadata>

acct-user/homeassistant/Manifest

@@ -1,2 +1,3 @@
-EBUILD homeassistant-0.ebuild 304 BLAKE2B 9f57819b2f9fdeff37cd5d32d89eaf70eea6d7b15b0a520fe0d51c0ca433fab3d68a750ee6cebf9ed626ad1716d113abf6316623abfe6befea49ff452a4e1050 SHA512 4433bc3e0868cf73abf4f83741c40f4802c3cfa6902b3b4e929a19254ea8cd82f4f838e71221540716cc0cbfd07dda8303cda6e91da59f4fd574be2198d6e960
+EBUILD homeassistant-0-r1.ebuild 315 BLAKE2B 382c8ea9cecded59859248ce1e6e31e2b8e09ca442df1356e1092bd7921ee1fac4927760891c59a78b0e45b83424d6bce0c996ff58fc8e61d58c4f4191b1becf SHA512 10afac67a518c19dd563c6aae5f3e825285b83b6c8a6b0d9b492af45a92a446c30ced76f084dae6357975ec893d181bd3869b5e0d8d3e0732d9ef33107318e22
+EBUILD homeassistant-0.ebuild 313 BLAKE2B 6558e433cfc1642cbc33d81a8a636d9448f9a9679696d3467cb98ae789be1b441180a424a484d62bf5f5f5b8fe3c28aacb9c7183caaeda9d5450ada8070e2722 SHA512 81257e3446f152df3db81e852f8bab9e2abe062b048c4fb9ca97a014250b5ddff6731f609ce288b090005cb88698d9f42a9045e58c6d5e4844ea9efc83b8ceef
 MISC metadata.xml 245 BLAKE2B aa51251edec756fb62676a8bc1034117d7a535b77d20fae3b84ceef1092c6a5e38d443b2ee625e10f1de4fcd21e3a11060b6ce576c9822ba2654a1f57a663e11 SHA512 cb8da34fa343d134d0a4b98b47a799abe016eff01f518a4ac0993cddb68c3324e8b610d28559bb72b1db1ca33c08881190d5e3e102ef42c3b9985fbfa4796ae9

acct-user/homeassistant/homeassistant-0-r1.ebuild

@@ -0,0 +1,15 @@
+# Copyright 2020-2021 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+inherit acct-user
+
+DESCRIPTION="Home Assistant Program User"
+ACCT_USER_ID=-1
+ACCT_USER_HOME="/var/lib/${PN}"
+ACCT_USER_HOME_PERMS=0755
+
+ACCT_USER_GROUPS=( "${PN}" dialout usb gpio )
+
+acct-user_add_deps

acct-user/homeassistant/homeassistant-0.ebuild

@@ -7,7 +7,7 @@ inherit acct-user
 
 DESCRIPTION="Home Assistant Program User"
 ACCT_USER_ID=-1
-ACCT_USER_HOME="/opt/${PN}"